Search NASA⌕ Search

Engineering topics

Bullock, R. Morris

Publications and source records attributed to Bullock, R. Morris.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

Liu, Liang↗
DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis and Reactivity of Fe(II) Complexes Containing Cis Ammonia Ligands

The development of earth-abundant transition-metal complexes for electrocatalytic ammonia oxidation is needed to facilitate a renewable energy economy. Important to this goal is a fundamental understanding of how ammonia binds to complexes as a function of ligand geometry and electronic effects. Here, we report the synthesis and characterization of a series of Fe(II)–NH 3 complexes supported by tetradentate, facially-binding ligands with a combination of pyridine and N-heterocyclic carbene donors. Electronic modification of the supporting ligand led to significant shifts in the Fe III/II potential and variations in NH bond acidities. Finally, investigations of ammonia oxidation by cyclic voltammetry, controlled potential bulk electrolysis, and through addition of stoichiometric organic radicals, TEMPO and tBu3 ArO • are reported. No catalysis of oxidation of NH 3 to N 2 was observed, and 15 N 2 was detected only in reactions with tBu3 ArO • .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Single‐Crystal to Single‐Crystal Transformations: Stepwise CO 2 Insertions into Bridging Hydrides of [(NHC)CuH] 2 Complexes

Abstract Mechanistic studies of substrate insertion into dimeric [(NHC)CuH] 2 (NHC=N‐heterocyclic carbene) complexes with two bridging hydrides have been shown to require dimer dissociation to generate transient, highly reactive (NHC)Cu−H monomers in solution. Using single‐crystal to single‐crystal (SC‐SC) transformations, we discovered a new pathway of stepwise insertion of CO 2 into [(NHC)CuH] 2 without complete dissociation of the dimer. The first CO 2 insertion into dimeric [(IPr*OMe)CuH] 2 (IPr*OMe=N,N′‐bis(2,6‐bis(diphenylmethyl)‐4‐methoxy‐phenyl)imidazole‐2‐ylidene) produced a dicopper formate hydride [(IPr*OMe)Cu] 2 (μ‐1,3‐O 2 CH)(μ‐H). A second CO 2 insertion produced a dicopper bis(formate), [(IPr*OMe)Cu] 2 (μ‐1,3‐O 2 CH)(μ‐1,1‐O 2 CH), containing two different bonding modes of the bridging formate. These dicopper formate complexes are inaccessible from solution reactions since the dicopper core cleanly ruptures to monomeric complexes when dissolved in a solvent.

Patrick, Evan A.↗
DOE OSTI2023

Single‐Crystal to Single‐Crystal Transformations: Stepwise CO 2 Insertions into Bridging Hydrides of [(NHC)CuH] 2 Complexes

Abstract Mechanistic studies of substrate insertion into dimeric [(NHC)CuH] 2 (NHC=N‐heterocyclic carbene) complexes with two bridging hydrides have been shown to require dimer dissociation to generate transient, highly reactive (NHC)Cu−H monomers in solution. Using single‐crystal to single‐crystal (SC‐SC) transformations, we discovered a new pathway of stepwise insertion of CO 2 into [(NHC)CuH] 2 without complete dissociation of the dimer. The first CO 2 insertion into dimeric [(IPr*OMe)CuH] 2 (IPr*OMe=N,N′‐bis(2,6‐bis(diphenylmethyl)‐4‐methoxy‐phenyl)imidazole‐2‐ylidene) produced a dicopper formate hydride [(IPr*OMe)Cu] 2 (μ‐1,3‐O 2 CH)(μ‐H). A second CO 2 insertion produced a dicopper bis(formate), [(IPr*OMe)Cu] 2 (μ‐1,3‐O 2 CH)(μ‐1,1‐O 2 CH), containing two different bonding modes of the bridging formate. These dicopper formate complexes are inaccessible from solution reactions since the dicopper core cleanly ruptures to monomeric complexes when dissolved in a solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen Atom Abstraction from an Os II (NH 3 ) 2 Complex Generates an Os IV (NH 2 ) 2 Complex: Experimental and Computational Analysis of the N–H Bond Dissociation Free Energies and Reactivity

We report double hydrogen atom abstraction from (TMP)Os II (NH 3 ) 2 (TMP = tetramesitylporphyrin) with phenoxyl or nitroxyl radicals leads to (TMP)Os IV (NH 2 ) 2 . This unusual bis(amide) complex is diamagnetic and displays an N-H resonance at 12.0 ppm in its 1 H NMR spectrum. 1 H- 15 N correlation experiments identified a 15 N NMR spectroscopic resonance at –267 ppm. Experimental reactivity studies and density functional theory calculations support relatively weak N-H bonds of 73.3 kcal/mol for (TMP)Os II (NH 3 ) 2 and 74.2 kcal/mol for (TMP)Os III (NH 3 )(NH 2 ). Cyclic voltammetry experiments provide an estimate of the pK a of [(TMP)Os III (NH 3 ) 2 ] + . In the presence of Barton’s base, a current enhancement is observed at the Os(III/II) couple, consistent with an ECE event. Spectroscopic experiments confirmed (TMP)Os IV (NH 2 ) 2 as the product of bulk electrolysis. Double hydrogen atom abstraction is influenced by π donation from the amides of (TMP)Os IV (NH 2 ) 2 into the d orbitals of the Os center, favoring the formation of (TMP)Os IV (NH 2 ) 2 over N-N coupling. This π donation leads to a Jahn-Teller distortion that splits the energy levels of the d xz and d yz orbitals of Os, results in a low spin electron configuration, and leads to minimal aminyl character on the N atoms, rendering (TMP)Os IV (NH 2 ) 2 unreactive towards amide-amide coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Weakening the N–H Bonds of NH 3 Ligands: Triple Hydrogen-Atom Abstraction to Form a Chromium(V) Nitride

Weakening and cleaving N-H bonds is crucial for improving molecular ammonia oxidation catalysts. In this work, we report the synthesis and hydrogen atom abstraction chemistry of bis(ammonia) Cr porphyrin complexes Cr(TPP)(NH 3 ) 2 and Cr(TMP)(NH 3 ) 2 (TPP = 5,10,15,20-tetraphenyl-meso-porphyrin and TMP = 5,10,15,20-tetramesityl-meso-porphyrin) using bulky aryloxyl radicals. The triple hydrogen atom abstraction reaction results in the formation of Cr V (por)(≡N), with the nitride deriving from ammonia, as indicated by UV-Vis and FT-IR spectroscopy, and a single crystal structural determination of Cr(TPP)(≡N). Subsequent oxidation of this chromium(V)-nitrido complex results in the formation of Cr III (por), with scission of the Cr≡N bond. A computational analysis illustrates the progression from Cr II to Cr V and evaluates the energetics of abstracting hydrogen atoms from Cr II -NH 3 to generate Cr V ≡N. The formation and isolation of Cr V (por)(≡N) illustrates the stability of these species and the need to chemically activate the nitride moiety for atom transfer or N-N coupling reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Controlling Reaction Routes in Noble‐Metal‐Catalyzed Conversion of Aryl Ethers

Abstract Hydrogenolysis and hydrolysis of aryl ethers in the liquid phase are important reactions for accessing functionalized cyclic compounds from renewable feedstocks. On supported noble metals, hydrogenolysis is initiated by a hydrogen addition to the aromatic ring followed by C−O bond cleavage. In water, hydrolysis and hydrogenolysis proceed by partial hydrogenation of the aromatic ring prior to water or hydrogen insertion. The mechanisms are common for the studied metals, but the selectivity to hydrogenolysis increases in the order Pd 2 pressure, thus, the selectivity to hydrogenolysis is maximized by increasing temperature and decreasing H 2 pressure. Selectivity to C−O bond cleavage reaches >95 % in water and alkaline conditions.

Schmid, Julian↗
DOE OSTI2022

Controlling Reaction Routes in Noble‐Metal‐Catalyzed Conversion of Aryl Ethers

Abstract Hydrogenolysis and hydrolysis of aryl ethers in the liquid phase are important reactions for accessing functionalized cyclic compounds from renewable feedstocks. On supported noble metals, hydrogenolysis is initiated by a hydrogen addition to the aromatic ring followed by C−O bond cleavage. In water, hydrolysis and hydrogenolysis proceed by partial hydrogenation of the aromatic ring prior to water or hydrogen insertion. The mechanisms are common for the studied metals, but the selectivity to hydrogenolysis increases in the order Pd 2 pressure, thus, the selectivity to hydrogenolysis is maximized by increasing temperature and decreasing H 2 pressure. Selectivity to C−O bond cleavage reaches >95 % in water and alkaline conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computational Investigations of the Reactivity of Metalloporphyrins for Ammonia Oxidation

Density functional theory and molecular dynamics simulations were used to assess the ability of tetraphenylporphyrin (TPP)M complexes (where M = Cr, Mn, Fe, Co, Ni, Mo, Ru, W, and Os) to coordinate and weaken the N-H bonds of ammonia, as well as their reactivity towards N-N bond formation for N 2 generation. Compared to other metalloporphyrins, bis-ammonia complexes (TPP)Mo(NH 3 ) 2 and (TPP)W(NH 3 ) 2 exhibit low and level N-H BDFEs due to a stabilized (TPP)M(NH 3 )(NH) intermediate by multiple metal-ligand bonding. These results resemble those previously obtained for polypyridyl metal complexes, suggesting that broad trends in reactivity towards N-H bond cleavage are more metal-dependent rather than ligand-dependent for a metal in a nitrogen pseudo-octahedral environment. We investigated N-N bond formation via NH 3 nucleophilic attack on M-NH and M-N intermediates, compared to bimolecular coupling of M-NH x intermediates. We evaluated the reactivity of (TPP)Fe(NH 3 ) 2 towards N-N bond formation via a hydrazine pathway, and found amide-amide coupling to form a bridged hydrazido complex to be the most favorable pathway for N-N bond formation. Further investigation of possible N-N bond formation pathways by reaction with NH 3 led us to identify a possible Fe III -•NH species with significant aminyl character that bypasses the nucleophilic attack of NH 3 and that promotes homolytic N-H bond cleavage of ammonia. This reaction forms a Fe-NH 2 moiety and a transient •NH 2 radical that subsequently forms an N-N bond with the Fe-NH 2 moiety to form a (TPP)Fe(NH 3 )(N 2 H 4 ) species. Furthermore, these results indicate the need to evaluate the radical character of imido species and their reactivity towards N-H bond cleavage of ammonia.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗
DOE OSTI2020

Oxidation of Ammonia with Molecular Complexes

Oxidation of ammonia by molecular complexes is a burgeoning area of research. Several scientific challenges underpin these efforts, requiring a fundamental understanding of individual reactions steps, particularly for cleavage of N-H bonds and formation of N-N bonds. Overall, this perspective evaluates the challenges of designing molecular catalysts for oxidation of ammonia, and highlights recent key contributions to realizing the goals of viable energy storage and retrieval based on the N-H bonds of ammonia in a carbon-free energy cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling P–C/C–H Bond Cleavage in Nickel Bis(diphosphine) Complexes: Reactivity Scope, Mechanism, and Computations

The synthesis of heteroleptic [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes and the cleavage of P–C and C–H bonds of the P 2 N 2 ligand in those complexes are reported here. The products are five-coordinate complexes in which Ni–C and P–H bonds have formed to give a cyclic moiety containing Ni–CH$=$NR 2 . The reactivity of [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes is influenced by the rigidity of the diphosphine, the steric effect of the substituents, and length of the carbon linker of the diphosphine ligands. Diphosphine ligands bearing a rigid backbone (e.g., dmpbz, 1,2-bis(dimethylphosphino)benzene) or aromatic substituents (e.g., dppe, 1,2-bis(diphenylphosphino)ethane) react with [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 to give P–C/C–H bond cleavage products. Both [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 and [Ni(P t Bu 2 N Bn 2 )(dmpm)(MeCN)][BF 4 ] 2 (dmpm = 1,2-bis(dimethylylphosphino)methane) were prepared by the reaction of [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 with the corresponding diphosphine ligands. [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 readily undergoes P–C/C–H bond cleavage in nitromethane. In sharp contrast, [Ni(P t Bu 2 N Bn 2 )(dmpm)][BF 4 ] 2 is stabilized by dmpm, a diphosphine with small bite angle, and does not show P–C/C–H bond cleavage reactivity. Computational results show that for complexes bearing less bulky diphosphine ligands, such as dmpm, the barriers for the rate-determining transition states are in some examples higher than 30 kcal/mol with the M06 functional, higher than those for complexes bearing more rigid or more bulky ligands, consistent with experimental studies. The calculated barriers for the first transition state correlated with increased values of the dihedral angle formed by the two NiP 2 planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using nature’s blueprint to expand catalysis with Earth-abundant metals

Original title changed for publication from; " Using Nature's Blueprint to Enable Catalysis with Earth-Abundant Metals" A diverse array of redox transformations that are essential to life are catalyzed by metalloenzymes that feature an earth-abundant metal. In contrast, platinum-group metals have been the cornerstone of many industrial catalytic reactions for decades, providing high activity, thermal stability and tolerance to chemical poisons. We assert that Nature’s blueprint provides the fundamental principles for vastly expanding the use of abundant metals in catalysis. We highlight the key physical properties of abundant metals that distinguish them from precious metals, and we look to Nature to understand how the inherent attributes of abundant metals can be embraced, leading to unique, highly efficient catalysts, emphasizing reactions crucial to the sustainable production and transformation of fuels and chemicals.

Bullock, Ronald M.↗
DOE OSTI2020

Mechanistic Studies on the Insertion of Carbonyl Substrates into Cu‐H: Different Rate‐Limiting Steps as a Function of Electrophilicity

Abstract We report mechanistic studies on the insertion reactions of [(NHC)Cu(μ‐H)] 2 complexes with carbonyl substrates by UV‐vis and 1 H NMR spectroscopic kinetic studies, H/D isotopic labelling, and X‐ray crystallography. The results of these comprehensive studies show that the insertion of Cu‐H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu‐H monomer from Cu‐H dimer for more electrophilic substrates, and hydride transfer from a transient Cu‐H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu‐hemiacetalate and Cu‐hemiaminalate moieties from the insertion of an ester or amide into the Cu−H bond.

Tran, Ba L.↗
DOE OSTI2020

Mechanistic Studies on the Insertion of Carbonyl Substrates into Cu-H: Different Rate-Limiting Steps as a Function of Electrophilicity

In this paper, we report mechanistic studies on the insertion reactions of [(NHC)Cu(H)] 2 complexes with carbonyl substrates by UV-vis and 1 H NMR spectroscopic kinetic studies, H/D isotopic labelling, and X-ray crystallography. The results of these comprehensive studies show that the insertion of Cu-H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu-H monomer from Cu-H dimer for more electrophilic substrates and hydride transfer from a transient Cu-H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu-hemiacetalate and Cu-hemiaminalate moieties from the insertion of an ester and amide into the Cu-H bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Diversion of Catalytic C–N Bond Formation to Catalytic Oxidation of NH 3 through Modification of the Hydrogen Atom Abstractor

We report that (TMP)Ru(NH 3 ) 2 (TMP = tetramesitylporphryin) is a molecular catalyst for oxidation of ammonia to dinitrogen. An aryloxy radical, tri-tert-butylphenoxyl (ArO•) abstracts H atoms from a bound ammonia ligand of (TMP)Ru(NH 3 ) 2 , leading to the discovery of a new catalytic C-N coupling to the para position of ArO•, forming 4-amino-2,4,6-tri-tert-butylcyclohexa-2,5-dien-1-one. Modification of the aryloxy radical to contain a trityl group at the para position, 2,6-di-tert-butyl-4-tritylphenoxyl radical, prevents C-N coupling and diverts the reaction to catalytic oxidation of ammonia to give N 2 . We achieve 125(±5) turnovers at 22 °C for oxidation of NH 3 , the highest reported to date for a molecular catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗