Search NASA⌕ Search

Engineering topics

Caratzoulas, Stavros

Publications and source records attributed to Caratzoulas, Stavros.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Engineering Active Sites of Metal/Metal Oxide Catalysts by Oxide Ligand Overlayers

Abstract Engineering sites of supported metal catalysts is essential to enhancing activity and selectivity. Such enhancement is typically achieved by particle size modification, surface alloying, or attaching molecular ligands. Yet, control strategies for complex, multifunctional molecules and catalysts, where selectivity is crucial, are lacking. Here, we demonstrate that submonolayer WO x with tunable coverage preferentially decorates well‐coordinated Pt terrace sites as a stable ligand. By combining experimental kinetics with probe molecules, in situ spectroscopies, and first‐principles modeling, we show that the WO x coverage on Pt modifies the metal‐to‐acid site balance while retaining the acid strength intact and results in optimal reactivity for metal‐acid catalyzed reactions at a specific metal, size, and support‐dependent WO x coverage. The oxide can also alter the reactant adsorption mode, reversing selectivity and pathways from terrace‐ to step‐dominated, as evidenced in furfural decarbonylation and hydrogenation. The insights open avenues for improving metal/metal oxide catalysts beyond the specific system.

Zhou, Jiahua↗
DOE OSTI2024

Propane Dehydrogenation on Pt x Zn y Active Sites in Silicalite‐1

Abstract The improvement of Pt‐based catalysts for propane dehydrogenation (PDH) has progressed by recent investigations that have identified Zn as a promising promoter for Pt subnanometer catalysts. It is desirable to gain insights into the structure, stability, and activity of such active sites and the factors that influence them, such as Zn : Pt ratio, Pt coordination and nuclearity. Here, we employ density functional theory and microkinetic simulations to investigate the stability of Pt x Zn y ( x =1–3, y=0–3) active sites grafted on silanols of Silicalite‐1 and the PDH activity of Pt. We find that the coordination of a Pt atom to a nest of grafted Zn(II) atoms increases the stability of the Pt 1 Zn y sites, whose activity is similar for y=0–2 and drops dramatically for y>2. We further demonstrate, via linear scaling relations and microkinetic simulations, that the turnover frequency obeys a volcano law as a function of propylene binding strength. The Pt 2 Zn 1 and Pt 3 Zn 1 sites are stable and exhibit activity similar to Pt 1 Zn 2 , but only Pt 1 Zn 2 manifests reaction kinetics consistent with experimental data, strongly suggesting the active site composition in the synthesized catalyst samples. The methodology presented here suggests a general strategy for deducing active site information such as composition through simple kinetic experiments.

Liu, Yilang↗
DOE OSTI2024

Propane Dehydrogenation on Pt x Zn y Active Sites in Silicalite‐1

Abstract The improvement of Pt‐based catalysts for propane dehydrogenation (PDH) has progressed by recent investigations that have identified Zn as a promising promoter for Pt subnanometer catalysts. It is desirable to gain insights into the structure, stability, and activity of such active sites and the factors that influence them, such as Zn : Pt ratio, Pt coordination and nuclearity. Here, we employ density functional theory and microkinetic simulations to investigate the stability of Pt x Zn y ( x =1–3, y=0–3) active sites grafted on silanols of Silicalite‐1 and the PDH activity of Pt. We find that the coordination of a Pt atom to a nest of grafted Zn(II) atoms increases the stability of the Pt 1 Zn y sites, whose activity is similar for y=0–2 and drops dramatically for y>2. We further demonstrate, via linear scaling relations and microkinetic simulations, that the turnover frequency obeys a volcano law as a function of propylene binding strength. The Pt 2 Zn 1 and Pt 3 Zn 1 sites are stable and exhibit activity similar to Pt 1 Zn 2 , but only Pt 1 Zn 2 manifests reaction kinetics consistent with experimental data, strongly suggesting the active site composition in the synthesized catalyst samples. The methodology presented here suggests a general strategy for deducing active site information such as composition through simple kinetic experiments.

Liu, Yilang↗
DOE OSTI2024

Effect of reaction media on hydrogenolysis of polyethylene plastic waste: Polymer-surface interactions in small alkane/polymer blends

The polymer reaction media and its properties can be altered by recycling a fraction of liquid products or adding alkane solvents. Less clear is whether this strategy affects hydrogenolysis. Herein, we investigated the effect of short-chain alkanes C n consisting of n carbons (n=8, 16, and 32) on the upcycling of high-density polyethylene (HDPE) plastic waste to lubricant-range products over Ru/TiO 2 catalysts by multiscale simulations and experiments. First, we trained a force field for polymer/surface interactions on a Ru 22 nanoparticle (NP) supported on TiO 2 . Using replica exchange molecular dynamics simulations, we studied the effect of small hydrocarbons on the adsorption of a surrogate polymer, C 142 , on the catalyst. We found segregation of long chains (C 142 ) at the catalyst surface due to the enthalpy gained by adsorbing more C-C bonds of the long chains, compensating for entropic losses upon adsorption. Short-chain molecules decrease the adsorbed carbons of long chains on the Ru NP due to blocking Ru active sites. Compared to the bulk chains, competitive adsorption results in a broader, heavy-tailed distribution of end-to-end distance of adsorbed chains. Our experiments demonstrated that catalyst activity declines significantly beyond simple dilution due to changes in polymer adsorption, and tuning the reaction media by creating suitable blends impacts hydrogenolysis. Density distributions for a 50:50%wt mixture of PP and PE show that PE chains are segregated at the surface, so they are prone to C-C bond breaking much faster than PP chains. H/D exchange experiments show preferential deuteration of PE, while CH 3 groups of PP remain undeuterated. Furthermore, this may be explained by the preferential sorption of PE over PP, leading to specific distribution in the polymer blend.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge‐hosted Fe−N 3 Sites

Abstract Nitrogen‐doped, carbon‐supported transition metal catalysts are excellent for several reactions. Structural engineering of M−N x sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe−N 3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe−N 3 sites with varying Fe−N bond lengths distinguishable by X‐ray absorption spectroscopy. We investigate the CTH activity by density‐functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe−N 3 distortion, raises the Fe orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe−N bond length, an excellent activity descriptor. We elucidate the origin of the CTH activity and principles for high‐performing Fe−N−C catalysts by defect engineering.

Yang, Piaoping↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge–hosted Fe–N3 Sites

Nitrogen-doped, carbon-supported transition metal catalysts are excellent for several reactions. Structural engineering of metal-Nx sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe-N3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe-N3 sites with varying Fe-N bond lengths distinguishable by X-ray absorption spectroscopy. We investigate the CTH activity by density functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe-N3 distortion, raises the Fe [[EQUATION]]orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe-N bond length, an excellent activity descriptor. Furthermore, we elucidate the origin of the CTH activity and principles for high-performing Fe-N-C catalysts by defect engineering.

09 BIOMASS FUELS↗
DOE OSTI2023

Effect of Co/SiO 2 Single-Site Heterogeneity on Small Alkane Dehydrogenation Kinetics

Atomically dispersed, high-spin Co(II) atoms in distorted tetrahedral coordination to an amorphous silica (am-SiO 2 ) support, and more recently in zeolite frameworks, are active and selective for light alkane dehydrogenation. This paper investigates how variations in the geometry of the active sites affect the ethane dehydrogenation activity of atomically dispersed Co(II) on an am-SiO 2 support. We generate a distribution of sites and determine the geometric parameters that exhibit the strongest correlation with the coordination geometry and activity of the metal atom by means of linear dimensionality reduction techniques. We perform electronic structure calculations and microkinetic modeling and deduce the mechanism and kinetics for a representative sample of sites. Irrespective of the active site geometry, the rate of ethane dehydrogenation is governed by the β-hydride elimination, which involves quartet-doublet spin-crossing and proceeds adiabatically due to strong spin-orbit coupling. Informed by the complete microkinetic analysis of the sites, we derive the reduced rate expression as a function of three site-dependent quantities. We show that these site-dependent quantities correlate with the energy of formation of the ethyl intermediate that forms via C-H bond activation. This correlation allows us to derive the site-averaged rate for the entire distribution of sites. Among various sites, the tri-coordinate and planar tetra-coordinate Co sites exhibit higher Lewis acidity than the tetrahedral sites, and consequently, higher initial rates. Finally, we discuss the implications for more active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab Initio Molecular Dynamics Spectra for Characterization of Hydrated Al 2 O 3 Supported MoO x

The structure of supported MoO x /Al 2 O 3 catalysts is investigated using ab initio molecular dynamics (AIMD) and density-functional theory (DFT). Phase diagrams were computed to understand the hydroxylation coverage as a function of the temperature, H 2 O partial pressure, and MoO x loading. We relate the shifts in experimental Raman vibrational frequencies under hydrated conditions to hydrogen bonding interactions and the MoO x anchoring location. We showcase that the use of AIMD as a benchmark for DFT can provide insight into how, under certain hydrated conditions, DFT excels as an inexpensive method for computing vibrational frequencies, while, under dehydrated conditions, it is susceptible to the largest errors. Additionally, to facilitate the analysis of the hydroxyl region of experimental infrared spectra, we compute the power spectra of individual hydroxyls and see a strong relationship between OH stretching frequencies and the surrounding coordination environment, which are also impacted by anchored MoO x . Here, we compare computational and experimental IR and Raman spectra of catalysts synthesized herein under the same conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facet-dependent strong metal-support interactions control the C–O bond activation

Reducible metal oxides are selective and effective for C–O bond scission of hydrodeoxygenation reactions via the reverse Mars-van Krevelen mechanism. Creating efficient redox centers while minimizing metal surfaces leads to highly selective catalysts. Single noble metal atoms activate the surface M–O bond, but the catalyst activity is limited due to low loading. Here, we report that the strong metal-support interaction between Ir and CeO 2 is facet sensitive, and certain facets regulate the C–O bond cleavage. At 300°C reduction, Ir is mostly encapsulated on an octahedron by (111) facets but remains exposed by (110) facets. The former is selective, whereas the latter is not. In conclusion, density functional theory indicates that Ir encapsulation is favored on (111) under reaction conditions, and oxygen vacancies more readily form on encapsulated Ir than on pristine ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Highly active, ultra-low loading single-atom iron catalysts for catalytic transfer hydrogenation

Highly effective and selective noble metal-free catalysts attract significant attention. Here, a single-atom iron catalyst is fabricated by saturated adsorption of trace iron onto zeolitic imidazolate framework-8 (ZIF-8) followed by pyrolysis. Its performance toward catalytic transfer hydrogenation of furfural is comparable to state-of-the-art catalysts and up to four orders higher than other Fe catalysts. Isotopic labeling experiments demonstrate an intermolecular hydride transfer mechanism. First principles simulations, spectroscopic calculations and experiments, and kinetic correlations reveal that the synthesis creates pyrrolic Fe(II)-plN 3 as the active center whose flexibility manifested by being pulled out of the plane, enabled by defects, is crucial for collocating the reagents and allowing the chemistry to proceed. The catalyst catalyzes chemoselectively several substrates and possesses a unique trait whereby the chemistry is hindered for more acidic substrates than the hydrogen donors. This work paves the way toward noble-metal free single-atom catalysts for important chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The role of the metal core in the performance of WO x inverse catalysts

In this study, metal-metal oxide inverse catalysts are valuable in diverse applications but selecting pairs is challenging. Here we investigate the role of metal cores (Pt, Ru, Rh, Pd, Ni) in the formation and dynamics of Brønsted acid sites on WO x overlayer on carbon. By in situ/ex situ characterizations, probe chemistry kinetics, and DFT calculations, we demonstrate that metals with varying work functions promote the WO x dispersion, enhancing the Brønsted acidity than the 3D crystallites on carbon at submonolayer coverages by tuning the oxidation state of WO x . The metal core impacts the water splitting and hydroxylation of WO x . Water splitting on Ru-WO x is thermodynamically favorable compared to Ni-WO x and increases the dehydration rate on the former, leading to an activity enhancement by increasing the H 2 pulsing frequency. This study provides insights into optimizing inverse catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ab Initio Molecular Dynamics Study of Pd Nucleation on a γ-Al 2 O 3 Surface

We perform ab initio molecular dynamics (AIMD) free energy simulations to investigate the stability and dynamics of dispersed Pd atoms and subnanometer clusters on γ-Al 2 O 3 . We consider nucleation for varying Pd loadings on dry γ-Al 2 O 3 (100), dry γ-Al 2 O 3 (110) and wet γ-Al 2 O 3 (110) and examine temperature, entropy and water coverage effects on the stability and dynamics of Pd clusters. At low Pd loading (1.07 Pd atoms/nm 2 on the (100) and 0.75 Pd/nm 2 on the (110)), association of the Pd atoms is thermodynamically unfavorable on the dry surfaces and almost thermoneutral on the wet (110) owing to water blocking of the AlIII defect sites. In agreement with past studies, the Pd atoms are quite mobile but the diffusion free energy barriers do not increase with the water coverage, as previously suggested, but rather remain similar in magnitude owing to translational entropy at finite temperatures. At these Pd loadings, oxidized Pd(II) atoms on the wet (110) surface are dispersed and immobile. At higher Pd loading (1.12 and 1.5 Pd atoms/nm 2 ) on the (110) surface, Pd 3 and Pd 4 clusters are thermodynamically very stable and form fast. At the 1.12 Pd atoms/nm 2 loading, the formation of the Pd 3 cluster is two orders of magnitude slower when the surface is hydroxylated as the system becomes somewhat trapped before the dinuclear cluster Pd 2 collides with a Pd atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unexpected Kinetic Solvent Effects Enhance Activity and Selectivity in Biphasic Systems

Biphasic dehydration of fructose to 5-hydroxymethylfurfural (HMF) has shown unprecedented increases in productivity, but a mechanistic understanding is lacking. Herein, we couple fast experimental reaction kinetics, multiscale modeling (phase behavior, classical molecular dynamics(MD), and quantum mechanics/molecular mechanics MD), in situ sampling, and IR and 13 C-NMR spectroscopy to elucidate the complex effects of nonpolar extracting organic solvents on the kinetics of fructose dehydration. We show that these organic solvents can reach significant mutual solubility with water at reaction temperatures, enabling the partition of the sugar and catalyst into the extracting phase. In the organic-rich environment, the dehydration of fructose proceeds faster and more selectively than in water due to increased relative abundance of the reactive furanose isomer, enhanced water–catalyst–substrate interactions driven by nanophase separation, and higher product stability stemming from preferential solvation. Furthermore, we demonstrate that these solvent effects impact other critical biphasic reactions in biomass upgrading and provide qualitative principles for solvent selection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗