Engineering topics
Publications and source records attributed to Caratzoulas, Stavros.
The design of catalysts for the chemical recycling of plastic waste will benefit greatly from an intimate knowledge of the interfacial polymer–catalyst interactions that determine reactant and product distributions.
Abstract With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g −1 . Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.
Here, we report the synthesis, optimization, and characterization of Co/SiO 2 for ethane nonoxidative dehydrogenation. Co/SiO 2 is synthesized via strong electrostatic adsorption using the widely available Co(NO 3 ) 2 as the precursor. We demonstrate that high-temperature pretreatment (900 °C) in an inert atmosphere can significantly enhance the initial activity of the Co/SiO 2 catalyst. X-ray absorption near-edge spectroscopy (XANES), temperature-programmed reduction (TPR), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) suggest that highly dispersed Co(II) clusters are more active than Co 0 or CoO x nanoparticles. Fourier transform infrared (FTIR) and isopropanol (IPA) temperature-programmed desorption and density functional theory (DFT) calculations suggest that high-temperature treatment significantly increases the density of active Lewis acid sites, possibly via surface dehydroxylation of the catalyst.
Not provided.
With increasing demands for high-performance water sorption materials, metal-organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post-synthetic modification (PSM) of MOF-808, with di-sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g -1 . Further, di-sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF-808 to below 25 % RH. While MOF-808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di-sulfonic acid PSM MOF-808 retained >80 % of the original capacity. PSM MOF-808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.
ZrO 2 provides high selectivity (>90%) to conjugated pentadienes through the dehydra-decyclization of C-5 cyclic ethers, even at high conversions. 1,3-Pentadiene was the major product in both reaction of 2-methyltetrahydrofuran and tetrahydropyran over ZrO 2 . The reaction of 3-methyltetrahydrofuran produced nearly stoichiometric amounts of isoprene. Other catalysts, including TiO 2 , γ-Al 2 O 3 , and H-ZSM-5, were generally much less selective and produced a mixture of diene isomers. A combination of TPD and steady-state measurements revealed that both piperylenes are exclusively produced through primary catalytic pathways from 2-methyltetrahydrofuran, avoiding any isomerization once formed. First-principle calculations on ZrO 2 imply the presence of an energetically favored, surface isomerization of ring-opened intermediates to conjugated alkenolates that selectively dehydrate to conjugated dienes, providing high selectivity to the desired products. Finally, the stabilization of the conjugated alkenolate is key for understanding the ability of ZrO 2 to selectively produce conjugated dienes from cyclic ethers, without the need for the thermo-limited diene isomerization.
Here metal-metal oxide (M-MO) inverse catalysts are broadly applied. Brønsted acid sites on the oxide overlayers are often hypothesized to drive selective C-O bond activation. However, the Brønsted acid site nature and dynamics under working conditions remain poorly understood due to multiple materials functionalities. Here, we investigate the formation and the dynamics of Brønsted acid and redox sites on PtWO x /C under working conditions. DFT-based thermodynamic calculations and microkinetic modeling reveal a complex interplay between Brønsted acid and redox sites and potentially fast catalyst dynamics at comparable time scales to the chemistry. Combining in situ characterization and probe chemistry, we demonstrate that the density of Brønsted acid sites on the PtWO x /C inverse catalyst could be modulated by up to two orders of magnitude by altering the reaction parameters and by the chemistry itself. We elicit an order of magnitude increase in the acid-catalyzed dehydration average reaction rate by periodic hydrogen pulsing.
Adsorptive desulfurization with Cu and Ce ion-exchanged Y zeolite (CuCeY) has proven to be an effective method for the removal of sulfur compounds from hydrocarbon fuels. In this study, Cu and Ce exchanged Y materials including CuY, CeY, and CuCeY were prepared and examined to investigate the mechanism behind the superior sulfur adsorption and selectivity of CuCeY. In situ conditions were used to study the materials as prepared for optimal desulfurization. X-ray diffraction (XRD) confirmed the absence of large well-ordered crystalline phases from metallic or oxide Cu and Ce after the reduction of the samples. The oxidation states and local environments of Cu and Ce were determined using X-ray adsorption fine structure (XAFS) analysis and correlated to theoretical findings obtained from density functional theory (DFT) calculations. XAFS data indicate the successful reduction of Cu species to Cu + and Cu o , and Ce to Ce 3+ . Analysis of XAFS spectra located Cu and Ce within the Y zeolite framework with Cu cations in the six-member ring sites and as small metallic Cu clusters. Ce cations were found to occupy both six-member ring and hexagonal prism sites. Furthermore, these results reveal the structure of CuCeY as prepared for desulfurization and provide insight into its superior sulfur adsorption performance.
Density-functional theory calculations and microkinetic analysis are used to investigate the efficacy of Ga-modified γ-Al 2 O 3 (110) surfaces for the catalytic dehydrogenation of ethane and elucidate the synergy between Ga and Al sites. The model surfaces are modified by either Ga grafting or doping. We consider and analyze numerous active sites and rank them using microkinetic analysis. The kinetic parameters obtained from microkinetic modelling are compared with experimental values for ethane dehydrogenation over Ga 2 O 3 -Al 2 O 3 mixed oxides prepared by co-precipitation. The dominant reaction pathway proceeds via heterolytic C-H bond dissociation to a surface proton and a metal-carbanion intermediate that undergoes β-hydride elimination. We find that grafted Ga sites are catalytically inactive. In contrast, Ga-doped sites exhibit fivefold enhancement in catalytic activity when compared to the sites on pristine Al 2 O 3 , owed to the synergy between neighboring AlIII and GaIV sites. Furthermore, we model and investigate the effect of surface hydroxylation, demonstrate how surface water interferes with the aforementioned synergy between AlIII and GaIV sites and discuss the implications for the catalytic activity of the modified surfaces. Here, an increase in the partial pressure of H 2 O significantly increases the apparent activation energies of dehydrogenation and interestingly changes the most active site.
A subset of coordination cages have garnered considerable recent attention for their potential permanent porosity in the solid state. Herein, we report a series of functionalized carbazole-based cages of the structure type M 12 (R-cdc) 12 (M = Cr, Cu, Mo) where the functional groups include a range of aromatic substituents. Single-crystal X-ray structure determinations reveal a variety of intercage interactions in these materials, largely governed by pi–pi stacking. Density functional theory for a subset of these cages was used to confirm that the nature of the increased stability of aryl-functionalized cages is a result of inter-cage ligand interactions.
Abstract Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO 3 H 2 by post‐synthesis modification. Characterization reveals that UiO‐66‐PO 3 H 2 retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.