Search NASA⌕ Search

Engineering topics

Chen, J

Publications and source records attributed to Chen, J.

At least 145 records · Page 8

Correlating Extent of Pt–Ni Bond Formation with Low-temperature Hydrogenation of Benzene and 1,3-butadiene over Supported Pt/Ni Bimetallic Catalysts

Low-temperature hydrogenation of benzene and 1,3-butadiene on supported Pt/Ni catalysts have been used as probe reactions to correlate hydrogenation activity with the extent of Pt-Ni bimetallic bond formation. Pt/Ni bimetallic and Pt and Ni monometallic catalysts were supported on {gamma}-Al{sub 2}O{sub 3} using incipient wetness impregnation. Two sets of bimetallic catalysts were synthesized: one set to study the effect of metal atomic ratio and the other to study the effect of impregnation sequence. Fourier transform infrared spectroscopy (FTIR) CO adsorption studies were performed to characterize the surface composition of the bimetallic nanoparticles, and transmission electron microscopy (TEM) was utilized to characterize the particle size distribution. Batch reactor studies with FTIR demonstrated that all bimetallic catalysts outperformed monometallic catalysts for both benzene and 1,3-butadiene hydrogenation. Within the two sets of bimetallic catalysts, it was found that catalysts with a smaller Pt:Ni ratio possessed higher hydrogenation activity and that catalysts synthesized using co-impregnation had greater activity than sequentially impregnated catalysts. Extended X-ray absorption fine structure (EXAFS) measurements were performed in order to verify the extent of Pt-Ni bimetallic bond formation, which was found to correlate with the hydrogenation activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Depth Variation of Deep Seismicity from in situ Measurements of Mineral Strengths at High Pressures

Strengths of major minerals of Earth's mantle have been measured using in situ synchrotron X-ray diffraction at high pressures. Analysis of the diffraction peak widths is used to derive the yield strengths. Systematic analysis of the experimental result for olivine, wadsleyite, ringwoodite and perovskite indicates that minerals in the upper mantle, the transition zone and the lower mantle have very distinct strength character. Increasing temperature weakens the upper mantle mineral, olivine, significantly. At high temperature and high pressure, the transition zone minerals, wadsleyite and ringwoodite, have higher strengths than the upper mantle mineral. Among all the minerals studied, the lower mantle mineral, perovskite, has the highest strength. While both the upper mantle and the transition zone minerals show a notable strength drop, the strength of the lower mantle mineral shows just an increase of relaxation rate (no strength drop) when the temperature is increased stepwise by 200 K. The strength characteristics of these major mantle minerals at high pressures and temperatures indicate that yield strength may play a crucial role in defining the profile of deep earthquake occurrence with depth.

36 MATERIALS SCIENCE↗

A Preliminary Synthesis of Modeled Climate Change Impacts on U.S. Regional Ozone Concentrations

This paper provides a synthesis of results that have emerged from recent modeling studies of the potential impacts of global climate change (c. 2050) on U.S. regional ozone concentrations. This research has been carried out under the auspices of an ongoing U.S. Environmental Protection Agency (EPA) assessment effort to increase scientific understanding of the multiple complex interactions between climate, emissions, atmospheric chemistry, and air quality, the ultimate goal of which is to enhance the ability of air quality managers to consider global change in their decisions through improved characterization of the potential impacts of global change on air quality, including O3, particulate matter (PM), and mercury (Hg). The results discussed here are interim, representing the first phase of the EPA assessment whose aim was to consider the effects of climate change alone, without accompanying changes in anthropogenic emissions of precursor pollutants. Across all of the modeling experiments carried out by the different groups, simulated global climate change causes increases in summertime O3 concentrations over some substantial regions of the country. These regional patterns of change, however, are not, in general, the same across the different simulations. These differences result from variations in the simulated patterns of mean changes in key meteorological drivers, such as temperature and surface insolation. Some regions, such as the Northeast/Mid-Atlantic and Midwest, show greater agreement across groups, whereas others, such as the West Coast and the Southeast, show wider disagreements. How isoprene nitrate chemistry is represented in the different modeling systems is an additional critical factor in the simulated O3 response to climate change.

54 ENVIRONMENTAL SCIENCES↗

Quasicrystalline order in self-assembled binary nanoparticle superlattices.

The discovery of quasicrystals in 1984 changed our view of ordered solids as periodic structures and introduced new long-range-ordered phases lacking any translational symmetry. Quasicrystals permit symmetry operations forbidden in classical crystallography, for example five-, eight-, ten- and 12-fold rotations, yet have sharp diffraction peaks. Intermetallic compounds have been observed to form both metastable and energetically stabilized quasicrystals; quasicrystalline order has also been reported for the tantalum telluride phase with an approximate Ta{sub 1.6}Te composition. Later, quasicrystals were discovered in soft matter, namely supramolecular structures of organic dendrimers and tri-block copolymers, and micrometre-sized colloidal spheres have been arranged into quasicrystalline arrays by using intense laser beams that create quasi-periodic optical standing-wave patterns. Here we show that colloidal inorganic nanoparticles can self-assemble into binary aperiodic superlattices. We observe formation of assemblies with dodecagonal quasicrystalline order in different binary nanoparticle systems: 13.4-nm Fe{sub 2}O{sub 3} and 5-nm Au nanocrystals, 12.6-nm Fe{sub 3}O{sub 4} and 4.7-nm Au nanocrystals, and 9-nm PbS and 3-nm Pd nanocrystals. Such compositional flexibility indicates that the formation of quasicrystalline nanoparticle assemblies does not require a unique combination of interparticle interactions, but is a general sphere-packing phenomenon governed by the entropy and simple interparticle potentials. We also find that dodecagonal quasicrystalline superlattices can form low-defect interfaces with ordinary crystalline binary superlattices, using fragments of (3{sup 3}.4{sup 2}) Archimedean tiling as the 'wetting layer' between the periodic and aperiodic phases.

36 MATERIALS SCIENCE↗

Crystallographic origin of perpendicular magnetic anisotropy in CoPt film: polarized x-ray absorption study

Crystallographic structure, growth induced miscibility gap and strain in Ta/Co{sub 100-x}Pt{sub x} (0 {le} x {le} 43 at%)/Ru/Ta/glass films deposited at ambient temperature were investigated using polarized x-ray absorption spectroscopy to clarify the origin of observed perpendicular magnetic anisotropy (PMA) in Co{sub 72}Pt{sub 28} film. Extended x-ray absorption fine structure spectroscopy data at Co K-edge showed that Co has a similar local atomic environment and averaged interatomic distance in the in-plane and out-of-plane polarization geometries for Co{sub 72}Pt{sub 28}, ruling out the contribution of magneto-elastic anisotropy and growth induced structural anisotropy as the origin of PMA. A large PMA in Co{sub 72}Pt{sub 28} film was attributed to the preferred hexagonal close-packed stacking as observed using the x-ray absorption near-edge structure spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Classical Aspects in Above-Threshold Ionization with a Midinfrared Strong Laser Field

We present high resolution photoelectron energy spectra of noble gas atoms from high intensity above-threshold ionization (ATI) at midinfrared wavelengths. An unexpected structure at the very low-energy portion of the spectra, in striking contrast to the prediction of the simple-man theory, has been revealed. A semiclassical model calculation is able to reproduce the experimental feature and suggests the prominent role of the Coulomb interaction of the outgoing electron with the parent ion in producing the peculiar structure in long wavelength ATI spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RNF8 Transduces the DNA-Damage Signal Via Histone Ubiquitylation And Checkpoint Protein Assembly

DNA-damage signaling utilizes a multitude of posttranslational modifiers as molecular switches to regulate cell-cycle checkpoints, DNA repair, cellular senescence, and apoptosis. Here we show that RNF8, a FHA/RING domain-containing protein, plays a critical role in the early DNA-damage response. We have solved the X-ray crystal structure of the FHA domain structure at 1.35 {angstrom}. We have shown that RNF8 facilitates the accumulation of checkpoint mediator proteins BRCA1 and 53BP1 to the damaged chromatin, on one hand through the phospho-dependent FHA domain-mediated binding of RNF8 to MDC1, on the other hand via its role in ubiquitylating H2AX and possibly other substrates at damage sites. Moreover, RNF8-depleted cells displayed a defective G2/M checkpoint and increased IR sensitivity. Together, our study implicates RNF8 as a novel DNA-damage-responsive protein that integrates protein phosphorylation and ubiquitylation signaling and plays a critical role in the cellular response to genotoxic stress.

36 MATERIALS SCIENCE↗

Adsorption and Catalytic Oxidation of Gaseous Elemental Mercury in Flue Gas over MnOx/Alumina

MnOx/Al{sub 2}O{sub 3} catalysts (i.e., impregnating manganese oxide on alumina) were employed to remove elemental mercury (Hg{sup 0}) from flue gas. MnOx/Al{sub 2}O{sub 3} was found to have significant adsorption performance on capturing Hg{sup 0} in the absence of hydrogen chloride (HCl), and its favorable adsorption temperature was about 600 K. However, the catalytic oxidation of Hg{sup 0} became dominant when HCl or chlorine (Cl{sub 2}) was present in flue gas, and the removal efficiency of Hg{sup 0} was up to 90% with 20 ppm of HCl or 2 ppm of Cl{sub 2}. In addition, the catalysts with adsorbed mercury could be chemically regenerated by rinsing with HCl gas to strip off the adsorbed mercury in the form of HgCl{sub 2}. Sulfur dioxide displayed inhibition to the adsorption of Hg{sup 0} on the catalysts, but the inhibition was less to the catalytic oxidation of Hg{sup 0}, especially in the presence of Cl{sub 2}. The analysis results of XPS and pyrolysis-AAS indicated that the adsorbed mercury was mainly in the forms of mercuric oxide (Hg{sup 0}) and the weakly bonded speciation, and the ratio of them varied with the adsorption amount and manganese content on catalysts. The multifunctional performances of MnOx/Al{sub 2}O{sub 3} on the removal of Hg{sup 0} appeared to the promising in the industrial applications.

01 COAL, LIGNITE, AND PEAT↗

A state-space Bayesian framework for estimating biogeochemical transformations using time-lapse geophysical data

We develop a state-space Bayesian framework to combine time-lapse geophysical data with other types of information for quantitative estimation of biogeochemical parameters during bioremediation. We consider characteristics of end-products of biogeochemical transformations as state vectors, which evolve under constraints of local environments through evolution equations, and consider time-lapse geophysical data as available observations, which could be linked to the state vectors through petrophysical models. We estimate the state vectors and their associated unknown parameters over time using Markov chain Monte Carlo sampling methods. To demonstrate the use of the state-space approach, we apply it to complex resistivity data collected during laboratory column biostimulation experiments that were poised to precipitate iron and zinc sulfides during sulfate reduction. We develop a petrophysical model based on sphere-shaped cells to link the sulfide precipitate properties to the time-lapse geophysical attributes and estimate volume fraction of the sulfide precipitates, fraction of the dispersed, sulfide-encrusted cells, mean radius of the aggregated clusters, and permeability over the course of the experiments. Results of the case study suggest that the developed state-space approach permits the use of geophysical datasets for providing quantitative estimates of end-product characteristics and hydrological feedbacks associated with biogeochemical transformations. Although tested here on laboratory column experiment datasets, the developed framework provides the foundation needed for quantitative field-scale estimation of biogeochemical parameters over space and time using direct, but often sparse wellbore data with indirect, but more spatially extensive geophysical datasets.

54 ENVIRONMENTAL SCIENCES↗

Impact of laser-accelerated micron-size projectile on dense plasma

The impact of a laser-accelerated micron-size projectile on a dense plasma target is studied using two-dimensional particle-in-cell simulations. The projectile is first accelerated by an ultraintense laser. It then impinges on the dense plasma target and merges with the latter. Part of the kinetic energy of the laser-accelerated ions in the projectile is deposited in the fused target, and an extremely high concentration of plasma ions with a mean kinetic energy needed for fusion reaction is induced. The interaction is thus useful for laser-driven impact fusion and as a compact neutron source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of Large-Scale Density Cavities and Parametric-Decay Instabilities in the High-Altitude Discrete Auroral Ionosphere under Pulsed Electromagnetic Radiation

A large density cavity that measured 2000 km across and 500 km in height was observed by DEMETER and Formosat/COSMIC satellites in temporal and spatial relation to a new mode of propagation of electromagnetic (em) pulses between discrete magnetic field-aligned auroral plasmas to high altitudes. Recorded positive plasma potential from satellite probes is consistent with the expulsion of electrons in the creation of density cavities. High-frequency decay spectra support the concept of parametric instabilities fed by free energy sources.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Feasibility of Amorphous Selenium Based Photon Counting Detectors for Digital Breast Tomosynthesis

Amorphous selenium (a-Se) has been incorporated successfully in direct conversion flat panel x-ray detectors, and has demonstrated superior image quality in screening mammography and digital breast tomosynthesis (DBT) under energy integration mode. The present work explores the potential of a-Se for photon counting detectors in DBT. We investigated major factors contributing to the variation in the charge collected by a pixel upon absorption of each x-ray photon. These factors included x-ray photon interaction, detector geometry, charge transport, and the pulse shaping and noise properties of the photon counting readout circuit. Experimental measurements were performed on a linear array test structure constructed by evaporating an a-Se layer onto an array of 100 {mu}m pitch strip electrodes, which are connected to a 32 channel low noise photon counting integrated circuit. The measured pulse height spectrum (PHS) under polychromatic xray exposure was interpreted quantitatively using the factors identified. Based on the understanding of a-Se photon counting performance, design parameters were proposed for a 2D detector with high quantum efficiency and count rate that could meet the requirements of photon counting detector for DBT.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characteristics of liquid ethanol diffusion flames from mini tube nozzles

A series of experiments was conducted to explore the combustion characteristics of a diffusion flames from mini tubes fueled by liquid ethanol with visual observations of the flame shape, the dynamic liquid-vapor interface during phase change inside the capillary tubes and the tube outer surface temperature using CCD and IR cameras. As the fuel supply rate increased, the interface location rose to the tube exit and the temperature gradient on the outer tube surface increased, consequently the evaporating became much stronger and the interface tended to be unstable. The combustion characteristics are closely related to the rapid phase change and violent evaporation and interfacial dynamics, with the violent evaporation, actually explosive boiling, inducing an explosive flame. The intensity of the explosive flame became stronger as the flowrate increased with the maximum flame height, interface location movement, and sound intensity all significantly increasing. The periodicity of the explosive flame was directly proportional to the interface moving distance and inversely proportional to the fuel flow rate. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-temperature gas sensing through electronic coupling between tin oxide nanocrystal and carbon nanotube

A new gas-sensing platform for low-concentration gases (NO{sub 2}, H{sub 2}, and CO) comprises discrete SnO{sub 2} nanocrystals uniformly distributed on the surface of multiwalled carbon nanotubes (CNTs). The resulting hybrid nanostructures are highly sensitive, even at room temperature, because their gas sensing abilities rely on electron transfer between the nanocrystals and the CNTs.

36 MATERIALS SCIENCE↗

Correlating NEXAFS Characterization of Co-W and Ni-W Bimetallic Carbide Catalysts with Reactivity for Dry Reforming of Methane

The effect of temperature on the structure and performance of Co-W-C and Ni-W-C catalysts for dry reforming of methane (DRM) has been investigated using both reactors and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. For Co-W-C, the DRM reactivity is greatly improved after being exposed to methane at 850 C. For Ni-W-C, however, the catalytic performance before such exposure is good, although no obvious difference has been found in the catalytic performance before and after exposure to methane at 850 C. In this work, NEXAFS has been applied to characterize the fresh and spent catalysts, both before and after exposure to the reactants at 850 C, for both Co-W-C and Ni-W-C. Three NEXAFS regions have been investigated for each catalyst: the carbon K-edge, the oxygen K-edge and the L-edge of either cobalt or nickel. NEXAFS results provide insights into the possible origins for the different performance of those two different carbides. To exhibit reasonable reactivity for DRM, Ni-W oxide and Co-W oxide are required to be reduced, and the active stable catalysts must contain large amounts of carbon so that WC and either Ni or Co are seen in the bulk. NEXAFS results indicate that Ni-W-C can be reduced to a greater extent and at a lower temperature than Co-W-C. In addition, NEXAFS measurements reveal the formation of graphitic carbon at or near the surface region. This species can play a critical role in the reactivity and stability of the catalysts for DRM.

03 NATURAL GAS↗

Support Effect on the Low-Temperature Hydrogenation of Benzene over PtCo Bimetallic and the Corresponding Monometallic Catalysts

PtCo bimetallic and Co, Pt monometallic catalysts supported on ?-Al2O3, SiO2, TiO2 and activated carbon (AC) were prepared and evaluated for the hydrogenation of benzene at relatively low temperatures (343 K) and atmospheric pressure. Results from flow reactor studies showed that supports strongly affected the catalytic properties of different bimetallic catalysts. AC supported PtCo bimetallic catalysts exhibited significantly better performance than the other bimetallic catalysts, and all the bimetallic catalysts possessed higher activity than the corresponding monometallic catalysts. Results from CO chemisorption and H2-temperature-programmed reduction (H2-TPR) studies suggested that different catalysts possessed different properties in chemisorption capacity and reduction behavior, and AC supported PtCo catalysts possessed significantly higher CO chemisorption capacity compared to the other catalysts. Extended X-ray absorption fine structure (EXAFS) and transmission electron microscopy (TEM) analysis provided additional information regarding the formation of Pt-Co bimetallic bonds and metallic particle size distribution in the PtCo bimetallic catalysts on different supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗