Search NASA⌕ Search

Engineering topics

Chen, J

Publications and source records attributed to Chen, J.

154 records · Page 9

Deformation of Diopside Single Crystal at Mantle Pressure, 1, Mechanical Data

Steady-state deformation experiments were carried out in a deformation-DIA (D-DIA) high-pressure apparatus on oriented diopside single crystals, at pressure (P) ranging from 3.8 to 8.8 GPa, temperature (T) from 1100 to 1400 C, and differential stress ({sigma}) between 0.2 and 1.7 GPa. Three compression directions were chosen in order to test the activity of diopside dislocation slip systems, i.e., 1/2<1 1 0>{l_brace}1 {bar 1} 0{r_brace} systems activated together, both [1 0 0](0 1 0) and [0 1 0](1 0 0) systems together, or [0 0 1] dislocation slip activated in (1 0 0), (0 1 0) and {l_brace}1 1 0{r_brace} planes. Constant applied stress and specimen strain rates ({var_epsilon}) were monitored in situ using time-resolved synchrotron X-ray diffraction and radiography, respectively. Transmission electron microscopy (TEM) investigation of the run products revealed that dislocation creep was responsible for sample deformation. Comparison of the present high-P data with those obtained at room-P by Raterron and Jaoul (1991) - on similar crystals deformed at comparable T-{sigma} conditions - allows quantifying the effect of P on 1/2<1 1 0>{l_brace} 1 {bar 1} 0{r_brace} activity. This translates into the activation volume V* = 17 {+-} 6 cm{sup 3}/mol in the corresponding creep power law. Our data also show that both 1/2<1 1 0> dislocation slips and [0 0 1] have comparable slip activities at mantle P and T, while [1 0 0](0 1 0) and [0 1 0](1 0 0) slip systems remain marginal. These results show that P has a significant effect on high-T dislocation creep in diopside, the higher the pressure the harder the crystal, and that this effect is stronger on 1/2<1 1 0> slip than on [0 0 1] slip.

58 GEOSCIENCES↗

Correlating Particle Size and Shape of Supported Ru/gamma-Al2O3 Catalysts with NH3 Decomposition Activity

While ammonia synthesis and decomposition on Ru are known to be structure-sensitive reactions, the effect of particle shape on controlling the particle size giving maximum turnover frequency (TOF) is not understood. By controlling the catalyst pretreatment conditions, we have varied the particle size and shape of supported Ru/{gamma}-Al{sub 2}O{sub 3} catalysts. The Ru particle shape was reconstructed by combining microscopy, chemisorption, and extended X-ray absorption fine structure (EXAFS) techniques. We show that the particle shape can change from a round one, for smaller particles, to an elongated, flat one, for larger particles, with suitable pretreatment. Density functional theory calculations suggest that the calcination most likely leads to planar structures. We show for the first time that the number of active (here B{sub 5}) sites is highly dependent on particle shape and increases with particle size up to 7 nm for flat nanoparticles. The maximum TOF (based on total exposed Ru atoms) and number of active (B{sub 5}) sites occur at 7 nm for elongated nanoparticles compared to at {approx}1.8-3 nm for hemispherical nanoparticles. A complete, first-principles based microkinetic model is constructed that can quantitatively describe for the first time the effect of varying particle size and shape on Ru activity and provide further support of the characterization results. In very small nanoparticles, particle size polydispersity (due to the presence of larger particles) appears to be responsible for the observed activity.

36 MATERIALS SCIENCE↗

Ionic High-Pressure Form of Elemental Boron

This Letter presents the results of high-pressure experiments and ab initio evolutionary crystal structure predictions, and found a new boron phase that we named gamma-B28. This phase is comprised of icosahedral B12 clusters and B2 pairs in a NaCl-type arrangement, stable between 19 and 89 GPa, and exhibits evidence for charge transfer (for which our best estimate is delta approximately 0.48) between the constituent clusters to give (B2)delta+(B12)delta-. We have recently found that the same high-pressure boron phase may have given rise to the Bragg reflections reported by Wentorf in 1965 (ref. 1), although the chemical composition was not analysed and the data (subsequently deleted from the Powder Diffraction File database) seems to not have been used to propose a structure model. We also note that although we used the terms 'partially ionic' and 'ionic' to emphasize the polar nature of the high-pressure boron phase and the influence this polarity has on several physical properties of the elemental phase, the chemical bonding in gamma-B28 is predominantly covalent.

36 MATERIALS SCIENCE↗

Experimental study of femtosecond laser-stimulated electrical discharges in small gaps and surface modifications

Femtosecond laser-stimulated discharges in nanoscale and microscale gaps between etched nanoprobe tip cathodes and gold film anodes with applied dc potential were experimentally studied to define parameter ranges for their controlled formation and resulting surface modifications. For appropriate values of gap length, applied potential, and laser irradiance, breakdown discharges could be reliably stimulated by femtosecond laser pulses and the mean breakdown field was approximately an order of magnitude smaller than for breakdown without laser stimulation. For 500 nm gaps, discharges were observed for applied potentials as small as 20 V and controllable gold film surface melting was detected for applied potential of 27.5 V. Minor cathode tip ablation could be observed for femtosecond laser pulses that reliably stimulated discharges, suggesting that cathode material played an important role in stimulation of breakdown discharges in nanoscale gaps. Surface melting produced features as small as 60 nm on gold film when discharge current was limited by 1 M{omega} series resistor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Extended High Pressure-Temperature Phase Diagram of NaBH4

We have studied the structural stability of NaBH4 under pressures up to 17 GPa and temperatures up to 673 K in a diamond anvil cell and formed an extended high P-T phase diagram using combined synchrotron x-ray diffraction and Raman spectroscopy. Even though few reports on phase diagram of NaBH4 are found in current literature, up to our knowledge this is the first experimental work using diamond anvil cell in a wide pressure/temperature range. Bulk modulus, its temperature dependence, and thermal expansion coefficient for the ambient cubic phase of NaBH4 are found to be 18.76(1) GPa, -0.0131GPaK{sup -1}, and 12.5x10{sup -5}+23.2x10{sup -8} T/K, respectively. We have also carried out Raman spectroscopic studies at room temperature up to 30 GPa to reinvestigate the phase transitions observed for NaBH{sub 4}. A comparative symmetry analysis also has been carried out for different phases of NaBH{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photon-exposure-dependent photon-stimulated desorption for obtaining photolysis cross section of molecules adsorbed on surface by monochromatic soft x-ray photons

Photon-exposure-dependent positive- and negative-ion photon-stimulated desorption (PSD) was proposed to study the photoreactions and obtain the photolysis cross sections of molecules adsorbed on a single-crystal surface by monochromatic soft x-ray photons with energy near the core level of adsorbate. The changes in the F{sup +} and F{sup -} PSD ion yields were measured from CF{sub 3}Cl molecules adsorbed on Si(111)-7x7 at 30 K (CF{sub 3}Cl dose=0.3x10{sup 15} molecules/cm{sup 2}, {approx}0.75 monolayer) during irradiation of monochromatic soft x-ray photons near the F(1s) edge. The PSD ion yield data show the following characteristics: (a) The dissociation of adsorbed CF{sub 3}Cl molecules is due to a combination of direct photodissociation via excitation of F(1s) core level and substrate-mediated dissociation [dissociative attachment and dipolar dissociation induced by the photoelectrons emitting from the silicon substrate]. (b) the F{sup +} ion desorption is associated with the bond breaking of the surface CF{sub 3}Cl, CF{sub 2}Cl, CFCl, and SiF species. (c) the F{sup -} yield is mainly due to DA and DD of the adsorbed CF{sub 3}Cl molecules. (d) The surface SiF is formed by reaction of the surface Si atom with the neutral fluorine atom, F{sup +}, or F{sup -} ion produced by scission of C-F bond of CF{sub 3}Cl, CF{sub 2}Cl, or CFCl species. A kinetic model was proposed for the explanation of the photolysis of this submonolayer CF{sub 3}Cl-covered surface. Based on this model and the variation rates of the F{sup +}/F{sup -} signals during fixed-energy monochromatic photon bombardment at 690.2 and 692.6 eV[near the F(1s) edge], the photolysis cross section was deduced as a function of energy.

36 MATERIALS SCIENCE↗

In Situ Long-Term Reductive Bioimmobilization of Cr(VI) in Groundwater Using Hydrogen Release Compound

Here we describe a novel approach for, and present evidence of the effectiveness of, long-term, in situ bioimmobilization of toxic and soluble Cr(VI) in groundwater using a 13C-labeled slow-release polylactate. A field experiment was conducted at Hanford (Washington), the U.S. Department of Energy nuclear site. A combination of in situ hydrogeological, geophysical, geochemical, and microbiological measurements and analyses of water samples and sediments provided detailed and reliable description of in situ biogeochemical processes. The results of this experiment show that a single lactate injection into Cr(VI)-contaminated groundwater stimulates an average increase in biomass by up to 50 times, from—5∙105 to 2.5∙107 cells/mL. The results also show a depletion of terminal electron acceptors O2, NO3-, and SO42- , and an increase in Fe2+. The biogeochemical processes, including the reaction of ferrous ion with hexavalent Cr, cause the formation of nontoxic and insoluble trivalent Cr precipitates. Cr(VI) concentration in the lactate injection well has remained below the background concentration in downgradient monitoring wells and below the drinking water standards for 3 years. The current studies suggest that Cr(VI) biogeochemical immobilization under these conditions may be fairly resilient, the applicability and degree of resilience under different redox conditions at this and other contaminated sites is currently under study.

08 HYDROGEN↗

Functionalized Single-Walled Carbon Nanotubes as Rationally Designed Vehicles for Tumor-Targeted Drug Delivery

A novel single-walled carbon nanotube (SWNT)-based tumor-targeted drug delivery system (DDS) has been developed, which consists of a functionalized SWNT linked to tumor-targeting modules as well as prodrug modules. There are three key features of this nanoscale DDS: (a) use of functionalized SWNTs as a biocompatible platform for the delivery of therapeutic drugs or diagnostics, (b) conjugation of prodrug modules of an anticancer agent (taxoid with a cleavable linker) that is activated to its cytotoxic form inside the tumor cells upon internalization and in situ drug release, and (c) attachment of tumor-recognition modules (biotin and a spacer) to the nanotube surface. To prove the efficacy of this DDS, three fluorescent and fluorogenic molecular probes were designed, synthesized, characterized, and subjected to the analysis of the receptor-mediated endocytosis and drug release inside the cancer cells (L1210FR leukemia cell line) by means of confocal fluorescence microscopy. The specificity and cytotoxicity of the conjugate have also been assessed and compared with L1210 and human noncancerous cell lines. Then, it has unambiguously been proven that this tumor-targeting DDS works exactly as designed and shows high potency toward specific cancer cell lines, thereby forming a solid foundation for further development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room Temperature Ferromagnetism of FeCo-Codoped ZnO Nanorods Prepared by Chemical Vapor Deposition

FeCo-codoped ZnO nanorods with room temperature ferromagnetic ordering have been synthesized by chemical vapor deposition. Detailed nanostructures were investigated by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and nanoprobe X-ray energy dispersive spectroscopy (EDS). The ZnO nanorods were grown along c-axis of a single crystalline wurtzite structure and no second phase was observed by high resolution TEM. EDS analysis along the nanowires indicated that Co and Fe were successfully doped into the ZnO lattice with concentrations about 0.6-1.0 at.%. Magnetic measurement demonstrates a ferromagnetic ordering with Curie temperature higher than 300 K presents in the ZnO nanorods.

14 SOLAR ENERGY↗