Nucleon isovector scalar charge from overlap fermions
Not Available
Engineering topics
Publications and source records attributed to Chen, Ting.
Not Available
Abstract Phase A (Mg 7 Si 2 O 8 (OH) 6 ) is one of the important dense hydrous magnesium silicates in subducting slab, because it forms after the breakdown of antigorite serpentine and could be the dominant hydrous phase in the upper‐mantle deep slab for the water transportation into deep Earth. In this study, the compressional ( P ) and shear ( S ) wave velocities of phase A were measured at simultaneous pressure and temperature conditions up to 11 GPa and 1073 K. Combined with elastic properties of olivine and pyroxenes, we calculate the hydration effect on the velocities of harzburgite lithology in cold subduction zones throughout the depth ranges where phase A is thermodynamically stable. Our calculations suggest that the hydration increases both P ‐ and S ‐wave velocities of harzburgite; at ∼5 wt% hydration, its seismic detectability is enhanced by 1%–1.5% in velocity contrasts relative to its anhydrous counterpart.
The Source Physics Experiment (SPE) is a series of chemical explosions at the Nevada National Security Site (NNSS) with the goal of understanding seismic-wave generation and propagation of underground explosions. To understand explosion source physics, accurate geophysical models of the SPE site are needed. Here, we utilize a large-N seismic array deployed at the SPE phase II site to generate a shallow subsurface model of shear-wave velocity. The deployment consists of 500 geophones and covers an area of, approximately, 2.5 × 2 km. The array is located in the Yucca Flat in the northeast corner of the NNSS, Nye County, Nevada. Using ambient-noise recordings throughout the large-N seismic array, we calculate horizontal-to-vertical spectral ratios (HVSRs) across the array. We obtain 2D seismic images of shear-wave velocities across the SPE phase II site for the shallow structure of the basin. In this work the results clearly image two significant seismic impedance interfaces at ~150–500 and ~350–600 m depth. The shallower interface relates to the contrast between Quaternary alluvium and Tertiary volcanic rocks. The deeper interface relates to the contrast between Tertiary volcanic rocks and the Paleozoic bedrock. The 2D subsurface models support and extend previous understanding of the structure of the SPE phase II site. This study shows that the HVSR method in conjunction with a large-N seismic array is a quick and effective method for investigating shallow structures.
The design and fabrication of robust metallic states in graphene nanoribbons (GNRs) are challenging because lateral quantum confinement and many-electron interactions induce electronic band gaps when graphene is patterned at nanometer length scales. Recent developments in bottom-up synthesis have enabled the design and characterization of atomically precise GNRs, but strategies for realizing GNR metallicity have been elusive. Here we demonstrate a general technique for inducing metallicity in GNRs by inserting a symmetric superlattice of zero-energy modes into otherwise semiconducting GNRs. We verify the resulting metallicity using scanning tunneling spectroscopy as well as first-principles density-functional theory and tight-binding calculations. Our results reveal that the metallic bandwidth in GNRs can be tuned over a wide range by controlling the overlap of zero-mode wave functions through intentional sublattice symmetry breaking.
Zirconium-based metal–organic frameworks (MOFs) have attracted interest due to their chemical and thermal stabilities and structural tunability. In this article, we demonstrate the tuning of the wettability of a UiO-66 structure via defect-engineering for efficient oil/water separation. UiO-66 crystals with controlled levels of missing-linker defects were synthesized using a modulation approach. As a result, the hydrophilicity of the defect-engineered UiO-66 (d-UiO-66) can be varied. In addition, a thin layer of hydrophilic d-UiO-66 was successfully fabricated on a series of stainless steel meshes (d-UiO-66@mesh), which exhibited excellent superhydrophilic and underwater superoleophobic properties and displayed interesting separation performance for various oil/water mixtures.
Microseismic monitoring can play a crucial role to ensure safe long-term geological carbon storage. For reliable long-term monitoring for CO2-injection-induced microseismic events, a surface seismic array is desirable in addition to borehole geophone sensors. Optimal design of surface seismic network is of great interest to achieve cost-effective monitoring. We develop a methodology to determine the optimal number of surface seismic stations with a geometrically satisfactory distribution for given monitoring regions. We design an optimal microseismic monitoring network based on widely-accepted guiding principles, and the relationship between the location accuracy of microseismic events and the total number of seismic stations. We determine the optimal number of seismic stations based on the trade-off curve of the event location accuracy vs. the total number of seismic stations. We apply our optimal design method to the Kimberlina carbon storage site in California. We use a synthetic Kimberlina model to show that approximately 20 surface seismic stations with a geometrically satisfactory distribution are preferred for the best trade-off between the cost and the event location accuracy.
Solid-oxide fuel/electrolyzer cells are limited by a dearth of electrolyte materials with low ohmic loss and an incomplete understanding of the structure-property relationships that would enable the rational design of better materials. In this work, using epitaxial thin-film growth, synchrotron radiation, impedance spectroscopy, and density-functional theory, the impact of structural parameters (i.e., unit-cell volume and octahedral rotations) on ionic conductivity is delineated in La 0.9 Sr 0.1 Ga 0.95 Mg 0.05 O 3-σ . As compared to the zero-strain state, compressive strain reduces the unit-cell volume while maintaining large octahedral rotations, resulting in a strong reduction of ionic conductivity, while tensile strain increases the unit-cell volume while quenching octahedral rotations, resulting in a negligible effect on the ionic conductivity. Calculations reveal that larger unit-cell volumes and octahedral rotations decrease migration barriers and create low-energy migration pathways, respectively. The desired combination of large unit-cell volume and octahedral rotations is normally contraindicated, but through the creation of superlattice structures both expanded unit-cell volume and large octahedral rotations are experimentally realized, which result in an enhancement of the ionic conductivity. All told, the potential to tune ionic conductivity with structure alone by a factor of ≈ 2.5 at around 600 degrees C is observed, which sheds new light on the rational design of ion-conducting perovskite electrolytes.
The Source Physics Experiment (SPE) consists of a series of chemical explosions at the Nevada National Security Site. The goal of the SPE is to understand and model seismic-wave generation and propagation from these explosions. To achieve this goal, we need an accurate velocity model of the SPE site. A large-N seismic array deployed at the SPE site during one of the chemical explosions (SPE-5) provides great data for this purpose. The array consists of 996 geophones and covers an area of approximately 2 × 2.5 km. In addition to the SPE-5 explosion, the array recorded 53 large weight drops. Using the large-N seismic array recordings, we perform first-arrival analysis and obtain a 2D P-wave velocity model of the SPE site. We image a sharp transition from high-velocity Cretaceous granite to low-velocity Quaternary alluvium. Other geological units such as the Tertiary volcanic rocks and Paleozoic sedimentary rocks are also clearly shown. The results of this work provide important local geological information and will be incorporated into the larger 3D modeling effort of the SPE program to validate the predictive models developed for the site.
Packaging of phage phi29 genome requires the ATPase gp16 and prohead RNA (pRNA). The highly conserved pRNA forms the interface between the connector complex and gp16. Understanding how pRNA interacts with gp16 under packaging conditions can shed light on the molecular mechanism of the packaging motor. Here, we present 3D models of the pRNA–gp16 complex and its conformation change in response to ATP or ADP binding. Using a combination of crystallography, small angle X-ray scattering and chemical probing, we find that the pRNA and gp16 forms a ‘Z’-shaped complex, with gp16 specifically binds to pRNA domain II. The whole complex closes in the presence of ATP, and pRNA domain II rotates open as ATP hydrolyzes, before resetting after ADP is released. Our results suggest that pRNA domain II actively participates in the packaging process.
In this study, we have measured the compressional and shear wave velocities of (Mg 1.77 Fe 0.22 Ca 0.01 )Si 2 O 6 natural orthopyroxene up to 13.5 GPa and 873 K using ultrasonic interferometry in conjunction with in situ synchrotron X-ray diffraction and imaging techniques. Previous acoustic experiments on orthoenstatite (OEn) MgSiO 3 indicated that both compressional and shear velocities (V P and V S ) of OEn undergo continuous velocity softening above 9 GPa at room temperature, which has been attributed to the phase transition from OEn to the metastable, high-pressure clinoenstatite HPCEn2. For the first time, our results suggest that pressure-induced velocity softening can occur in natural orthopyroxene at high-temperature conditions relevant to the Earth's cold subduction zones. As a result, estimates of the impedance and velocity contrasts between orthopyroxene (Opx) and high-pressure clinopyroxene (HPCpx) have been calculated, and the possibility of this phase transformation being a plausible candidate for seismic X-discontinuities at depth around 250–350 km is re-evaluated.
LANL is applying various machine learning techniques to different issues related to CO 2 injection and storage: To develop predictive reduced order models for rapid assessment of storage capacity in residual oil zones; To identify signals related to small leakage of CO 2 /brine and to quantify leakage mass; For early detection of small seismic events during injection operations
With abundant seismic data for small repeating earthquakes, it is important to construct a dynamic model that can explain various aspects of related observations. We report on small repeating earthquakes on a fault governed by rate- and state-dependent friction laws. The earthquakes occur on a velocity-weakening patch surrounded by a much larger velocity-strengthening region. The whole fault is subject to long-term tectonic loading. The model with a circular patch and the aging form of rate- and state-dependent friction laws has been shown to reproduce the scaling of recurrence time versus seismic moment for small repeating earthquakes in a previous study. In this work we investigate the behaviour of small repeating earthquakes in related models under different scenarios, including several forms of the state evolution equations in rate- and state-dependent friction laws, rectangular velocity-weakening patch geometries, quasi-dynamic versus fully dynamic representation of inertial effects and 2-D versus 3-D simulations. We discover that the simulated scalings between the recurrence time and seismic moment for these different scenarios is similar while differences do exist. We propose a theoretical consideration for the scaling between the recurrence time and seismic moment of small repeating earthquakes. For patch radii smaller than or comparable to the full nucleation size, the scaling is explained by the increase of seismic to aseismic slip ratio with magnitude. For patch radii larger than the full nucleation size, the scaling is explained by the model in which the recurrence time is determined by the earthquake nucleation time, which is in turn determined by the time for aseismic slip to penetrate the distance of the full nucleation size into the patch. The obtained theoretical insight is used to find the combinations of fault properties that allow the model to fit the observed scaling and range of the seismic moment and recurrence time.
Allosteric kinase inhibitors offer a potentially complementary therapeutic strategy to ATP-competitive kinase inhibitors due to their distinct sites of target binding. Here, we identify and study a mutant-selective EGFR allosteric inhibitor, JBJ-04-125-02, which as a single agent can inhibit cell proliferation and EGFR L858R/T790M/C797S signaling in vitro and in vivo. However, increased EGFR dimer formation limits treatment efficacy and leads to drug resistance. Remarkably, osimertinib, an ATP-competitive covalent EGFR inhibitor, uniquely and significantly enhances the binding of JBJ-04-125-02 for mutant EGFR. The combination of osimertinib and JBJ-04-125-02 results in an increase in apoptosis, a more effective inhibition of cellular growth, and an increased efficacy in vitro and in vivo compared with either single agent alone. Collectively, our findings suggest that the combination of a covalent mutant–selective ATP-competitive inhibitor and an allosteric EGFR inhibitor may be an effective therapeutic approach for patients with EGFR-mutant lung cancer. Significance: The clinical efficacy of EGFR tyrosine kinase inhibitors (TKI) in EGFR-mutant lung cancer is limited by acquired drug resistance, thus highlighting the need for alternative strategies to inhibit EGFR. Here, we identify a mutant EGFR allosteric inhibitor that is effective as a single agent and in combination with the EGFR TKI osimertinib.
Elastic properties of antigorite are important for interpretation of seismic mapping of serpentinization in the mantle wedge above subducting slabs. The compressional (V P ) and shear (V S ) wave velocities in pure antigorite aggregates were measured simultaneously up to 8.4 GPa by ultrasonic interferometry. We found that V P increases monotonically with pressure while V S increases with pressure up to about 3 GPa but undergoes a negative pressure dependence above 4 GPa. Compared to other mantle minerals, antigorite exhibits significantly lower P and S wave velocities as well as a higher V P /V S ratio at upper mantle pressures. We modeled velocity reductions manifesting through the formation of antigorite in mantle peridotite and provide compelling evidence that seismic anomalies with low-velocity and high V P /V S ratios is caused by varying degrees of serpentinization in subduction zones.
ABSTRACT In this work, the small molecule with double‐phosphaphenanthrene structure was successfully grafted on the surface of graphene oxide (GO), which is called functionalized graphene oxide (FGO). The introduction of FGO improved the poor interfacial compatibility between graphene and epoxy matrix. And FGO could be used as the highly effective flame retardant. The thermogravimetric analysis results showed a significant improvement in the char yield of cured FGO/EP. When the content of FGO was 3 wt %, the limiting oxygen index value reached 30.4%. At the same time, the three‐point bending and thermomechanical tests confirmed that the mechanical properties of the epoxy resin composites were improved. Based on the char analyses of SEM images and Raman spectroscopy, the flame retardant could promote the formation of a stable carbon layer. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137 , 47710.
Not provided.