Search NASA⌕ Search

Engineering topics

Chen, Ting

Publications and source records attributed to Chen, Ting.

At least 55 records · Page 3

Preface to the Focus Section on Machine Learning in Seismology

Machine learning (ML) is a collection of algorithms and statistical models that enable computers to extract relevant patterns and information from large data sets. Unlike physical modeling approaches, in which scientists develop theories based on physical laws to compare with real–world observations, ML approaches learn directly from data without explicitly reasoning about the underlying physical mechanisms. ML algorithms are often categorized into supervised and unsupervised learning (see fig. 2 in Kong et al., 2018). Supervised learning algorithms build a model from existing labeled input data with the goal of predicting the labels of new data.

58 GEOSCIENCES↗

Emergence of Rapid Oxygen Surface Exchange Kinetics during in Situ Crystallization of Mixed Conducting Thin Film Oxides

The oxygen surface exchange kinetics of mixed ionic and electronic conducting oxides (MIECs) play a vital role in the efficiency of intermediate-to-high-temperature electrochemical devices. While there is increasing interest in low-temperature preparation of MIEC thin films, the impact of the resultant varied degrees of crystallinity on the surface exchange kinetics has not been widely investigated. Herein, we probe the effect of crystallization on oxygen surface exchange kinetics in situ, by applying an optical transmission relaxation (OTR) approach during annealing of amorphous films. OTR enables contact-free, in situ, and continuous quantification of the oxygen surface exchange coefficient ( k chem ); we previously applied it to Pr x Ce 1– x O 2-δ and SrTi 1– x Fe x O 3-δ thin films. In this work, the OTR approach was successfully extended to other mixed conducting thin film compositions for the first time (i.e., perovskite SrTi 0.65 Co 0.35 O 3-δ and Ruddlesden–Popper Sr 2 Ti 0.65 Fe 0.35 O 4±δ ), as well as to Pr 0.1 Ce 0.9 O 2-δ , enabling quantification of the k chem of their native surfaces and comparison of the behavior of films with different final crystal structures. All thin films were prepared by pulsed laser deposition at 25 or 700–800 °C and subject to subsequent thermal treatments with simultaneous OTR monitoring of k chem . The surface roughness, grain size, and crystallinity were evaluated by scanning probe microscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Fluorite Pr 0.1 Ce 0.9 O 2-δ films grown at 25 °C did not exhibit an increase in k chem after annealing, as they were already crystalline as grown at 25 °C. For all other compositions, OTR enabled in situ observation of both the crystallization process and the emergence of rapid surface exchange kinetics immediately upon crystallization. Perovskite SrTi 0.65 Co 0.35 O 3-δ and Ruddlesden–Popper Sr 2 Ti 0.65 Fe 0.35 O 4±δ thin films grown at 25 °C exhibited at least 1–2 orders of magnitude enhanced k chem after annealing compared with highly crystalline thin films grown at 800 °C, indicating the benefits of in situ crystallization.

36 MATERIALS SCIENCE↗

Deep red emitting Mg2La2SnO7:Mn4+ phosphor: Synthesis and luminescence properties

Highlights: • Novel Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} deep-red-emitting phosphor is synthesized in air. • Emission band peaking at ∼ 706 nm is observed in the range of 640–780 nm. • The thermal stability and luminous mechanism is explained. - Abstract: Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor is synthesized by the solid-state reaction method in air. Monitored at 706 nm, excitation spectrum of Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor including peaks at ∼ 300, 333, 395, and 516 nm can be observed in the range of 220–600 nm. With excitation at 333 nm, emission band of Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor is shown in the range of 640–780 nm owing to the {sup 2}E → {sup 4}A{sub 2} transitions of Mn{sup 4+} ion. The optimal Mn{sup 4+} ion concentration is ∼ 0.3 mol% in Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor. The lifetime decreases from 1.23 to 0.83 ms with the increase of Mn{sup 4+} concentration from 0.1 to 1.2 mol%. There is only one luminescence center (Mn{sup 4+}) in Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor, which is confirmed by the luminescence properties, decay curves, and time-resolved emission spectra. Mg{sub 2}La{sub 2}SnO{sub 7}:Mn{sup 4+} phosphor has good thermal stability. Luminous mechanism is explained by energy level diagram of Mn{sup 4+} ion and the thermal quenching phenomenon is analyzed by the configuration coordinate diagram of Mn{sup 4+} ion.

36 MATERIALS SCIENCE↗

Unsupervised Dictionary Learning for Signal-to-Noise Ratio Enhancement of Array Data

Waveform enhancement methods generally explore lateral coherency in arrivals, often assuming a linear moveout across an array, as exhibited by plane waves. Here, we illustrate how unsupervised dictionary learning combined with orthogonal matching pursuit for feature extraction can be used for signal-to-noise ratio (SNR) enhancement. In this strategy, waveform characteristics are directly learned from provided data samples; the created dictionary is then used for signal extraction. This combination prevents the need to set a predefined dictionary, and it becomes computationally efficient because learning is only done on smaller data portions. Because the dictionary is learned from data, there is no assumption regarding wavefront shape or form. Tests on synthetic and field data demonstrate the better denoising performance in terms of SNR enhancement compared to other methods.

58 GEOSCIENCES↗

Elastic anomalies across phase transitions of praseodymium to 12 GPa

The elastic properties of praseodymium (Pr) were investigated at pressures up to 12 GPa at room temperature using ultrasonic interferometry technique. Softening and discontinuities in compressional (P) and shear (S) wave velocities were observed at around 2.5, 6.5 and 10.5 GPa, which are interpreted as indications of the phase transitions from Pr-I (dhcp) to Pr-II (fcc), Pr-II (fcc) to Pr-III (d-fcc) and Pr-III (d-fcc) to Pr-VII (monoclinic or orthorhombic), respectively. Very small discontinuities in compressibility have been observed across the phase transitions of I-II and II-III of Pr, which are unlikely visible in the X-ray diffraction studies. Finally, a comparison with the elastic behaviors of other lanthanide elements (e.g., Ce and La) suggests that the elastic anomalies associated with these phase transitions are likely to be caused by the 6s-5d electron transfer and the softening of acoustic phonon mode facilitated by decreased atomic distances under pressure.

36 MATERIALS SCIENCE↗

The effect of dietary ginseng polysaccharide supplementation on porcine milk‐derived esRNAs involved in the host immune responses

Abstract Ginseng polysaccharides (GPS) have been well known as an immune modulator. This study was conducted to investigate the effects of dietary supplemental GPS on the immune responses involved in sow’s milk‐derived exosomal shuttle RNAs (esRNAs) using RNA‐Seq and miRNA‐Seq. Of the 213 identified miRNA types, a total of 26 conserved miRNAs were differently expressed in response to GPS supplementation, including 10 up‐regulated and 16 down‐regulated miRNAs in GPS feeding group. In addition, exosomal transcriptome analysis identified 14,696 protein‐coding genes in sow’s milk exosomes, and 283 genes with 204 and 79 candidates showing up and down‐regulation were significantly responded to GPS supplementation. Integrated analysis of each differently expressed miRNA with significantly expressed genes further revealed the presence of 51 highly conserved miRNA–gene interactions that were annotated to be related to immunoregulatory functions. This work provided an important advance in the functional identification of dietary GPS supplementation and more fundamental information about how GPS promoted the immune response and healthy growth of the infant from mothers at molecular levels.

Sun, Jiajie↗

Meconium microbiome associates with the development of neonatal jaundice

Objective: Neonatal jaundice is a common disease that affects up to 60% of newborns. Gut microbiota mediated the excretion of bilirubin from the human body. However, the relationship between early gut microbiome and development of neonatal jaundice is not fully understood. Here we sought to characterize meconium microbiome of newborns and to clarify its association with risk of neonatal jaundice. Methods: We conducted a nested case–control study with 301 newborns providing meconium samples from 2014 to 2015. The main outcome was the development of neonatal jaundice at 42 day follow-up. 16S rRNA gene sequencing was performed to profile the meconium microbiome. LEfSe was employed to identify different features between control and case groups. Logistic regression was used to estimate the risk effect of early gut microbiome on neonatal jaundice. Results: Logistic regression models suggested that higher α-diversity was significantly associated with lower risk of jaundice in cesarean infants (OR 0.72, 95% CI 0.52–0.98), but not in infants born naturally. Higher relative abundance of Bifidobacterium pseudolongum in newborn meconium was significantly associated with lower risk of jaundice both in cesarean-born infants and in the total subjects (OR 0.24, 95% CI 0.07–0.68; OR 0.55, 95% CI 0.31–0.95, respectively). Spearman’s correlations showed that relative abundance of B. pseudolongum was significantly correlated with α-diversity (P < 0.01). Conclusion: Preventive and treatment methods implying early gut microbiome intervention could be promising for the management of neonatal jaundice.

59 BASIC BIOLOGICAL SCIENCES↗

Experimental and theoretical studies on the elasticity of tungsten to 13 GPa

Compressional (V_P) and shear wave (V_S) velocities of polycrystalline tungsten have been measured up to ~13 GPa at room temperature using ultrasonic interferometry in a multi-anvil apparatus. Using finite strain equation of state approaches, the elastic bulk and shear moduli and their pressure dependences are derived yielding $K_{S0}$= 325.9 ± 4.8 GPa, $G_0$ =164.1±2.5 GPa, $K^{'}_{S0}$ =3.65 ± 0.05 and $G^{'}_0$ =1.28 ± 0.02. On the basis of the current experimental data, the high-pressure behavior of Young’s modulus, Poisson’s ratio and ductility/brittleness for tungsten are also investigated. Complementary to the experimental data, the single crystal elastic constants, as well as the elastic anisotropy of tungsten are computed using density functional theory (DFT). The Voigt-Reuss-Hill average of the bulk and shear moduli calculated using the single crystal elastic constants from DFT are found comparable to the current experimental results within about 5%. Here, the present study offers a dataset for the elasticity of polycrystalline bcc tungsten to a maximum pressure more than 25-fold higher than other previous ultrasonic studies, which can further our understanding about the elastic, mechanical and electronic properties of tungsten under extreme conditions as well as thermodynamic modelling of its alloys.

36 MATERIALS SCIENCE↗

Topological band engineering of graphene nanoribbons

Topological insulators are an emerging class of materials that host highly robust in-gap surface or interface states while maintaining an insulating bulk1,2. Most advances in this field have focused on topological insulators and related topological crystalline insulators3 in two dimensions4,5,6 and three dimensions7,8,9,10, but more recent theoretical work has predicted the existence of one-dimensional symmetry-protected topological phases in graphene nanoribbons (GNRs)11. The topological phase of these laterally confined, semiconducting strips of graphene is determined by their width, edge shape and terminating crystallographic unit cell and is characterized by a Z2 invariant12 (that is, an index of either 0 or 1, indicating two topological classes—similar to quasi-one-dimensional solitonic systems13,14,15,16). Interfaces between topologically distinct GNRs characterized by different values of Z2 are predicted to support half-filled, in-gap localized electronic states that could, in principle, be used as a tool for material engineering11. Here we present the rational design and experimental realization of a topologically engineered GNR superlattice that hosts a one-dimensional array of such states, thus generating otherwise inaccessible electronic structures. This strategy also enables new end states to be engineered directly into the termini of the one-dimensional GNR superlattice. Atomically precise topological GNR superlattices were synthesized from molecular precursors on a gold surface, Au(111), under ultrahigh-vacuum conditions and characterized by low-temperature scanning tunnelling microscopy and spectroscopy. Our experimental results and first-principles calculations reveal that the frontier band structure (the bands bracketing filled and empty states) of these GNR superlattices is defined purely by the coupling between adjacent topological interface states. This manifestation of non-trivial one-dimensional topological phases presents a route to band engineering in one-dimensional materials based on precise control of their electronic topology, and is a promising platform for studies of one-dimensional quantum spin physics.

Science & Technology - Other Topics↗

Surface Ligand Promotion of Carbon Dioxide Reduction through Stabilizing Chemisorbed Reactive Intermediates

We have explored functionalizing metal catalysts with surface ligands as an approach to facilitate electrochemical carbon dioxide reduction reaction (CO 2 RR). To provide a molecular level understanding of the mechanism by which this enhancement occurs, we combine in situ spectroscopy analysis with an interpretation based on quantum mechanics (QM) calculations. We find that a surface ligand can play a critical role in stabilizing the chemisorbed CO 2 , which facilitates CO 2 activation and leads to a 0.3 V decrease in the overpotential for carbon monoxide (CO) formation. Moreover, the presence of the surface ligand leads to nearly exclusive CO production. At -0.6 V (versus reversible hydrogen electrode, RHE), CO is the only significant product with a faradic efficiency of 93% and a current density of 1.9 mA cm –2 . This improvement corresponds to 53-fold enhancement in turnover frequency compared with the Ag nanoparticles (NPs) without surface ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential geophysical and flow inversion to characterize fracture networks in subsurface systems

Subsurface applications, including geothermal, geological carbon sequestration, and oil and gas, typically involve maximizing either the extraction of energy or the storage of fluids. Fractures form the main pathways for flow in these systems, and locating these fractures is critical for predicting flow. However, fracture characterization is a highly uncertain process, and data from multiple sources, such as flow and geophysical are needed to reduce this uncertainty. We present a nonintrusive, sequential inversion framework for integrating data from geophysical and flow sources to constrain fracture networks in the subsurface. In this framework, we first estimate bounds on the statistics for the fracture orientations using microseismic data. These bounds are estimated through a combination of a focal mechanism (physics-based approach) and clustering analysis (statistical approach) of seismic data. Then, the fracture lengths are constrained using flow data. In conclusion, the efficacy of this inversion is demonstrated through a representative example.

97 MATHEMATICS AND COMPUTING↗

Tracking silica in Earth’s upper mantle using new sound velocity data for coesite to 5.8 GPa and 1073 K

We report the compressional and shear wave velocities for coesite have been measured simultaneously up to 5.8 GPa and 1073 K by ultrasonic interferometry for the first time. The shear wave velocity decreases with pressure along all isotherms. The resulting contrasts between coesite and stishovite reach ~34% and ~45% for P and S wave velocities, respectively, and ~64% and ~75% for their impedance at mantle conditions. The large velocity and impedance contrasts across coesite-stishovite transition imply that to generate the velocity and impedance contrasts observed at the X-discontinuity, only a small amount of silica would be required. The velocity jump dependences on silica, d(lnV P )/d(SiO 2 ) = 0.38 (wt %) -1 and d(lnV S )/d(SiO 2 ) = 0.52 (wt %) -1 , are utilized to place constraints on the amount of silica in the upper mantle and provide a geophysical approach to track mantle eclogite materials and ancient subducted oceanic slabs.

58 GEOSCIENCES↗

Final Project Report: Imaging Fault Zones Using a Novel Elastic Reverse-Time Migration Imaging Technique

Imaging fault zones and fractures is crucial for geothermal operators, providing important information for reservoir evaluation and management strategies. However, there are no existing techniques available for directly and clearly imaging fault zones, particularly for steeply dipping faults and fracture zones. In this project, we developed novel acoustic- and elastic-waveform inversion methods for high-resolution velocity model building. In addition, we developed acoustic and elastic reverse-time migration methods for high-resolution subsurface imaging of complex subsurface structures and steeply-dipping fault/fracture zones. We first evaluated and verified the improved capabilities of our newly developed seismic inversion and migration imaging methods using synthetic seismic data. Our numerical tests verified that our new methods directly image subsurface fracture/fault zones using surface seismic reflection data. We then applied our novel seismic inversion and migration imaging methods to a field 3D surface seismic dataset acquired at the Soda Lake geothermal field using Vibroseis sources. Our migration images of the Soda Lake geothermal field obtained using our seismic inversion and migration imaging algorithms revealed several possible fault/fracture zones. AltaRock Energy, Inc. is working with Cyrq Energy, Inc. to refine the geologic interpretation at the Soda Lake geothermal field. Trenton Cladouhos, Senior Vice President R&D of AltaRock, was very interested in our imaging results of 3D surface seismic data from the Soda Lake geothermal field. He planed to perform detailed interpretation of our images in collaboration with James Faulds and Holly McLachlan of University of Nevada at Reno. Using our high-resolution seismic inversion and migration imaging results can help determine the optimal locations to drill wells for geothermal energy production and reduce the risk of geothermal exploration.

47 OTHER INSTRUMENTATION↗

Antimicrobial activity and mechanism of the human milk-sourced peptide Casein201

Introduction: Casein201 is one of the human milk sourced peptides that differed significantly in preterm and full-term mothers. This study is designed to demonstrate the biological characteristics, antibacterial activity and mechanisms of Casein201 against common pathogens in neonatal infection. Methodology: The analysis of biological characteristics was done by bioinformatics. Disk diffusion method and flow cytometry were used to detect the antimicrobial activity of Casein201. Killing kinetics of Casein201 was measured using microplate reader. The antimicrobial mechanism of Casein201 was studied by electron microscopy and electrophoresis. Results: Bioinformatics analysis indicates that Casein201 derived from β-casein and showed significant sequence overlap. Antibacterial assays showed Casein201 inhibited the growth of S taphylococcus aureus and Y ersinia enterocolitica. Ultrastructural analyses revealed that the antibacterial activity of Casein201 is through cytoplasmic structures disintegration and bacterial cell envelope alterations but not combination with DNA. Conclusion: We conclude the antimicrobial activity and mechanism of Casein201. Our data demonstrate that Casein201 has potential therapeutic value for the prevention and treatment of pathogens in neonatal infection.

60 APPLIED LIFE SCIENCES↗