Engineering topics

Clark, I. O.

Publications and source records attributed to Clark, I. O..

At least 19 records

NASA NTRS1992

Gravitational and thermal effects in CVD flow and deposition

A three-phased approach is used to investigate the transport phenomena occurring in horizontal CVD reactors. The three phases are made up of laser velocimetry experimental investigations, numerical CFD modeling, and metal-organic chemical vapor deposition experimental studies. Laser velocimetry measurements of flow in a horizontal reactor with a cylindrical flow channel and tilted susceptor demonstrate velocity components arising from thermal expansion and buoyancy effects that significantly exceed the velocity components due to the external applied flow. MOCVD of InP and GaAs thin films in a horizontal reactor channel with a rectangular cross section and a tilted susceptor has also been examined.

Clark, I. O.↗

NASA NTRS1991

Characterization of MOCVD fluid dynamics by laser velocimetry

Three-component laser velocimetry techniques are applied to characterize the fluid dynamics of an MOCVD reactor. These methods provide three-dimensional quantitative measurements of the gas velocities inside the reactor at typical growth temperatures. The effects of buoyancy-induced convection are examined by comparing data from the hot reactor with cold reactor results. It was found that thermal convection dominated the fluid dynamics of the reactor at growth temperatures. Cold reactor tests showed unstable flow patterns that were subject to fluidic switching effects.

Johnson, E. J.↗

NASA NTRS1991

Laser velocimetry measurements in non-isothermal CVD systems

Researchers at the NASA Langley Research Center are applying laser velocimetry (LV) techniques to characterize the fluid dynamics of non-isothermal flows inside fused silica chambers designed for chemical vapor deposition (CVD). Experimental issues involved in the application of LV techniques to this task include thermophoretic effects on the LV seed particles, seeding the hazardous gases, index of refraction gradients in the flow field and surrounding media, optical access, relatively low flow velocities, and analysis and presentation of sparse data. An overview of the practical difficulties these issues represent to the use of laser velocimetry instrumentation for CVD applications is given. A fundamental limitation on the application of LV techniques in non-isothermal systems is addressed which involves a measurement bias due to the presence of thermal gradients. This bias results from thermophoretic effects which cause seed particle trajectories to deviate from gas streamlines. Data from a research CVD reactor are presented which indicate that current models for the interaction of forces such as Stokes drag, inertia, gravity, and thermophoresis are not adequate to predict thermophoretic effects on particle-based velocimetry measurements in arbitrary flow configurations.

Johnson, E. J.↗

NASA NTRS1991

Flow field velocity measurements for non-isothermal systems

Experimental techniques which can be potentially utilized to measure the gas velocity fields in nonisothermal CVD systems both in ground-based and space-based investigations are considered. The advantages and disadvantages of a three-component laser velocimetry (LV) system that was adapted specifically for quantitative determination of the mixed convective flows in a chamber for crystal growth and film formation by CVD are discussed. Data from a horizontal research CVD reactor indicate that current models for the effects of thermophoretic force are not adequate to predict the thermophoretic bias in arbitrary flow configurations. It is concluded that LV techniques are capable of characterizing the fluid dynamics of a CVD reactor at typical growth temperatures. Thermal effects are shown to dominate and stabilize the fluid dynamics of the reactor. Heating of the susceptor increases the gas velocities parallel to the face of a slanted susceptor by up to a factor of five.

Johnson, E. J.↗

NASA NTRS1987

Infrared properties of dust grains derived from IRAS observations

The analysis of several diffuse interstellar clouds observed by the Infrared Astronomy Satellite (IRAS) is presented. The 60/100 micron flux ratios appear to be nearly constant in clouds with up to 1 sup m visual extinction at the center. Observations of a highly regular cloud in Chamaeleon show that the 12/100 micron ratio peaks at an intermediate radial distance and declines towards the center of the cloud. These observations indicate that nonequilibrium emission accounts only for the 12 and 25 micron bands; strong emission observed at the 60 micron band is probably due to equilibrium thermal radiation. The correlation of the 12 micron emission with a red excess observed for a high latitude cloud, L1780, is shown to be consistent with the assumption that both features are due to fluorescence by the same molecular species.

Chlewicki, G.↗

NASA NTRS1986

Research Furnace for Crystal Preparation

Three-zone furnace tested and characterized for preparation of lead-tintelluride (LTT) crystals. Tests show temperature in furnace controlled to obtain constant rate of movement of high-temperature isotherm down length of furnace. Temperature profiles accurately controlled by three independent heaters. Control software brings separate heaters to any desired temperature.

Crouch, R. K.↗

NASA NTRS1986

Advanced Vapor-Supply Manifold

Advanced vapor-supply manifold solves problem of manifold purging. Design virtually eliminates dead gas volumes in manifold system. System incorporates special valve into manifold in way that leaks and contamination problems of previous systems, which use tees and three-port valves, are minimized or eliminated in both main manifold line and in supply line. Of considerable use in gas manifold systems where even small amounts of gaseous impurities constitute problem or where more than one gaseous material used in single system.

Clark, I. O.↗

NASA NTRS1985

Effects of supercooling in the initial solidification of PbTe-SnTe solid solutions

Deviations from compositions anticipated by the thermal equilibrium phase diagram have been observed in Bridgman-grown crystals of Pb(1-x)Sn(x)Te, in the first to freeze region of the boule. A set of experiments were conducted to determine the extent of thermal supercooling of Pb(1-x)Sn(x)Te in a Bridgman-like configuration. The results of the compositional profiles and the supercooling measurements are consistent with a diffusionless transformation occurring at the onset of solidification, and the length of uncontrolled growth is inversely related to the temperature gradient of the furnace.

Fripp, A. L.↗

NASA NTRS1985

Preparation for microgravity science investigation of compound semiconductor crystal growth

Preparatory work on Bridgman directional solidification (BDS) of PbSnTe crystals prior to microgravity crystal growth experiments on Shuttle flights are reported. Gravitational effects become important in crystal growth when density gradients are present. The situation is critical in BDS of PbSnTe because of the necessity of obtaining homogeneous compositional distributions, which can be disturbed when convective processes occur. Numerical models have been defined which quantify the effects of convection in the crystal growth solution. The models were verified by earth-based crystal-growth tests in a two-zone furnace using equal concentrations of each of the elements. Data are provided to demonstrate the differences in composition among crystals grown at different orientations to the gravitational field vector.

Fripp, A. L.↗

NASA NTRS1984

Experimental investigation of the effects of gravity on thermosolutal convection and compositional homogeneity in Bridgman grown, compound semiconductors

Lead-tin-telluride has been grown in a thermally stable mode (solutally unstable) and in a solutally stable (thermally unstable) mode in a Bridgman configuration. Significant differences in the crystal morphology and the compositional homogeneity have been found between the two configurations. In addition, for the solutally stable configuration, evidence has been found that the flow characteristics in the melt change drastically during the course of the run.

Crouch, R. K.↗

NASA NTRS1984

Effect of space exposure on pyroelectric infrared detectors (A0135)

The effects of long-duration space exposure and launch environment on the performance of pyroelectric detectors which is important for the prediction of performance degradation, setting exposure limits, or determining shielding requirements was investigated. Air pollution monitoring and thermal mapping of the Earth, which includes the remote sensing of aerosols and limb scanning infrared radiometer projects, requires photodetection in the 6- to 20 micro m region of the spectrum. Pyroelectric detectors can detect radiation in the 1- to 100 micro m region while operating at room temperature. This makes tahe pyroelectric detector a prime candidate to fill the thermal infrared detector requirements.

Robertson, J. B.↗

NASA NTRS1983

Characterization of the general purpose research furnace for low-G directional solidification experiments

Preliminary tests have shown that it is possible to control the temperature settings in NASA's General Purpose Research Furnace in such a manner as to obtain a constant rate of movement of a high temperature isotherm down the length of the furnace. These tests also showed that a temperature gradient on the order of 40 deg cm could be obtained in the furnace while moving the particular isotherm of interest, i.e., 900 C. This provides the possibility of performing directional solidification experiments in the furnace on a MEA flight in the low gravity environment provided by the Shuttle. A functional dependency of growth rate on perturbations during the the growth has been derived and shows the importance of avoiding non-steady growth rates and changing temperature gradients.

Crouch, R. K.↗

NASA NTRS1983

Experiment requirements and implementation plan (Erip) for semiconductor materials growth in low-G environment

The MEA-2 A facility was used to test the effect of the low gravity environment on suppressing convective mixing in the growth of Pb(1-x)Sn(x)Te crystals. The need to eliminate convection, the furnace characteristics and operation that will be required for successful experimental implementation, and to the level that is presently known, the measured physical properties of the Pb(1-x)Sn(x)Te system were discussed. In addition, a brief background of the present and potential utilization of Pb(1-x)Sn(x)Te is given. Additional experiments are anticipated in future MEA-A, improved MEA and other dedicated materials processing in space flight apparatus.

Crouch, R. K.↗

NASA NTRS1983

Solutal diffusion coefficient for liquid PbTe-SnTe

The solutal diffusion coefficient has been determined for liquid lead telluride-tin telluride using a modified shear cell technique. Postdiffusion concentration profiles are presented for several diffusion couples. The best analytical curve fit to the data gives a composition-dependent diffusion coefficient of (/3/7/ to the C power) x 0.00014 sq cm/sec, where C is the PbTe concentration. In addition, data are presented to show the importance of solutal convection in the lead-tin-telluride system.

Clark, I. O.↗

NASA NTRS1983

Optimization studies for the growth of Pb(1-x)Sn(x)Te in space

A study of the effects of convection on the quality of crystals grown by the Bridgman technique has been initiated. This study is to provide a basis for the utilization of the low-gravity environment furnished by the Space Shuttle in the development of crystals with a better quality than obtainable under terrestrial conditions. A series of ground-based studies has been started with the objective to optimize the results of Shuttle experiments. A description is presented of preliminary results of some of these studies. Attention is given to a thermo-solutal convection analysis, the development of a technique for interface demarcation, the growth of Pb(1-x)Sn(x)Te crystals, thermophysical property measurements, and solutal diffusion coefficients.

Crouch, R. K.↗

NASA NTRS1982

Precise Sealing of Fused-Quartz Ampoules

New technique rapidly evacuates and seals fused-quartz ampoule with precise clearance over contents without appreciably thinning ampoule walls. Quartz plug is lowered into working section of ampoule after ampoule has been evacuated. Plug is then fused to ampoule walls, forming vacuum seal. New technique maintains wall strength and pumping speed.

Debnan, W. J. J.↗

NASA NTRS1982

Ampoule sealing apparatus and process

An apparatus and process for sealing fused quartz ampoules housing a semiconductor growth charge under vacuum is described. An elongated fused quartz ampoule having an enlarged diameter open end and a reduced diameter closed end is vertically retained in a vacuum assembly. A semiconductor charge is disposed within the reduced diameter portion of the ampoule. A quartz plug of substantially the same diameter as the reduced diameter portion is suspended within the open and of the ampoule via a rotary vacuum feed. After evacuation of the ampoule a plug is lowered into the reduced diameter area and sealed therein while maintaining the vacuum on the ampoule. The charged ampoule area is then separated from the remaining structure by breaking along the scored line.

Debnam, W. J., Jr.↗

NASA NTRS1982

Ground based studies for the space processing of lead-tin-telluride

This paper summarizes the results of a series of studies dealing with crystal growth from the melt and in particular, the growth of the narrow bandgap semiconductor PbSnTe by the Bridgman technique. Theoretical calculations have shown that for low Prandtl number fluids such as semiconductors, convection has no effect on the temperature field in the melt but has a significant effect on the compositional field. They also show that convective flow will exist in a Bridgman growth system on earth, even in the 'thermally stable' configuration. Measurements of the specific heat have been made up to temperatures of 722 C. The thermal diffusivity has been measured up to 1010 C which includes values for the melt. The interdiffusion coefficients for PbTe and SnTe in the melt have been determined. A technique has been developed and tested which provides a vacuum tight quartz ampoule with electrical feedthroughs for interface demarcation studies during the Bridgman growth. Analysis of crystals grown has indicated that the PbSnTe system is solutally unstable and the distribution of SnTe in the crystal, after an anomalous first to freeze region, follows that predicted by Pfann for convection controlled growth. Studies of the amount of supercooling in PbSnTe indicate that this may explain an anomalous composition distribution in the first to freeze region of an unseeded growth.

Crouch, R. K.↗