Search NASA⌕ Search

Engineering topics

Costes, N. C.

Publications and source records attributed to Costes, N. C..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Analysis of coolant flow and heat transfer in the SSME HPOTP Number 4 bearing assembly

The PHOENICS code has been applied to simulate the flow of liquid oxygen through the number 4 ball bearing assembly of the Space Shuttle Main Engine High-Pressure Oxidizer Turbopump. The Body-Fitted Coordinate system capability of PHOENICS was utilized to create a geometrically accurate model. Effects accounted for by the model include the rotation rate of the calculation domain, viscous heating in the liquid oxygen and two-phase effects due to LOX boiling. A separation program was used to account for conduction within a ball bearing element which was coupled with the PHOENICS flow and heat transfer analysis. Solutions have been obtained for the velocity and temperature fields within the LOX coolant and the temperature within the ball element. The predicted ball temperatures indicate that the coolant is boiling in the region near the ball surface.

Owens, S. F.↗
NASA NTRS1987

A multidomain global modeling technique for analysis of Space Shuttle main engine

A multidomain global modeling technique is presented. The purpose of this multidomain methodology is to simultaneously analyze the three-dimensional compressible flow field in Space Shuttle main engine components. This technique provides flexibility and modularity for individual domain and also simplifies the grid generation task for each domain. A two-way coupling procedure is adopted for exchanging interface boundary conditions. This algorithm which requires that the adjacent domains share an overlapping grid slab, is fully conservative and implicit. For non-matching grid systems and for non-overlapping interfaces, an interpolation and/or extrapolation procedure is used when transferring the interface boundary conditions at the adjacent domains. To maintain overall conservation, a flux correction method is subsequently used. The coupling procedure was verified by modeling several geometries with features similar to SSME components. Satisfactory results for all test cases were obtained. Finally, this algorithm has been applied to the SSME flow simulation.

Tam, L. T.↗
NASA NTRS1987

A multidomain and multidimensional numerical analysis of flow in fuelside preburner, high pressure turbine, hot gas manifold and main injector assembly of the Space Shuttle main engine

The Space Shuttle Main Engine (SSME) consists of a large number of critical components each serving a special purpose. Any design change in one of these components not only alters its performance but also the performance of the ones in the upstream and in the downstream. To evaluate the effects of such a design change on the flow fields and on SSME's overall performance a multidomain and multidimensional analytical procedure has been developed and applied here to the series of components on the fuel side of the SSME. The results obtained from the multidomain analysis and their comparison with the single-domain solution when the SSME is operating at Full Power Load indicates that the multidomain model shows greater realism. It is concluded that this modeling technique would assist the designer significantly to achieve still higher performance levels of the SSME.

Mukerjee, T.↗
NASA NTRS1987

Liquid oxygen sloshing in Space Shuttle External Tank

This paper describes a numerical simulation of the hydrodynamics within the liquid oxygen tank of the Space Shuttle External Tank during liftoff. Before liftoff, the tank is filled with liquid oxygen (LOX) to approximately 97 percent with the other 3 percent containing gaseous oxygen (GOX) and helium. During liftoff, LOX is drained from the bottom of the tank, and GOX is pumped into the tank's ullage volume. There is a delay of several seconds before the GOX reaches the tank which causes the ullage pressure to decrease for several seconds after liftoff; this pressure 'slump' is a common phenomenon in rocket propulsion. When four slosh baffles were removed from the tank, the ullage gas pressure dropped more rapidly than in all previous flights. The purpose of this analysis was to determine whether the removal of the baffles could have caused the increased pressure 'slump' by changing the LOX surface dynamics. The results show that the LOX surface undergoes very high vertical accelerations (up to 5 g) and, therefore, splashing almost certainly occurs. The number of baffles does not affect the surface if the structural motion is assumed; but, the number of baffles may affect the structural motion of the tank.

Kannapel, M. D.↗
NASA NTRS1987

Three-dimensional analysis of liquid oxygen sloshing in Space Shuttle external tank

A three-dimensional numerical simulation has been performed in order to investigate the hydrodynamics within the liquid oxygen tank of the Space Shuttle external tank after liftoff. The results indicate that the LOX surface undergoes very high vertical accelerations (up to 5 g) and that splashing almost certainly occurs. Although the number of slosh baffles is not found to affect the surface, it is noted that the number of baffles may affect the structural motion of the tank. Surface accelerations are similar to those observed in previous two-dimensional simulations.

Kannapel, M. D.↗
NASA NTRS1986

Numerical analysis of the three-dimensional flow in the main injector assembly of the Space Shuttle Main Engine

The Main Injector Assembly of the Space Shuttle Main Engine supplies the propellants to the Main Combustion Chamber through a large number of vertical injector elements. The gas flow around these elements (LOX posts) is three-dimensional, turbulent and compressible. This paper presents the results of numerical modeling of the hot and cool sections of the Main Injector Assembly and shows that the shields on the outermost row of injector elements affect the flow and the pressure drop in the hot section significantly. It is suggested that appropriate experiments are undertaken to verify the predictions.

Mukerjee, T.↗
NASA NTRS1986

Numerical analysis of flow in the hot gas manifold of the Space Shuttle main engine

This paper presents a numerical model and results of analyses carried out to characterize the flow through the two duct configuration of the Hot Gas Manifold of the Space Shuttle Main Engine. Three dimensional computations have been performed for a half-scale air test model using a nonorthogonal body-fitted coordinate system. The calculation domain is extended from the inlet of the turnaround duct to the exit of the transfer duct. Three test cases, one for laminar flow and two for turbulent flow, have been considered. For turbulent flows, constant eddy viscosity and the k-epsilon model of turbulence were employed. As expected, laminar flow calculation predicts much larger pressure drop than turbulent flow cases. The turbulent flow results are in good agreement with the available flow-visualization data. This study and experimental data indicate that the two-transfer duct design will significantly improve the flow distribution in the Hot Gas Manifold and thereby enhance the overall performance of the SSME.

Owens, S. F.↗
NASA NTRS1974

Apollo soil mechanics experiment S-200

The physical and mechanical properties of the unconsolidated lunar surface material samples that were obtained during the Apollo missions were studied. Sources of data useful for deduction of soil information, and methods used to obtained the data are indicated. A model for lunar soil behavior is described which considers soil characteristics, density and porosity, strength, compressibility, and trafficability parameters. Lunar history and processes are considered, and a comparison is made of lunar and terrestrial soil behavior. The impact of the findings on future exploration and development of the moon are discussed, and publications resulting from lunar research by the soil mechanics team members are listed.

Mitchell, J. K.↗
NASA NTRS1974

Boundary value problems with incremental plasticity in granular media

Discussion of the critical state concept in terms of an incremental theory of plasticity in granular (soil) media, and formulation of the governing equations which are convenient for a computational scheme using the finite element method. It is shown that the critical state concept with its representation by the classical incremental theory of plasticity can provide a powerful means for solving a wide variety of boundary value problems in soil media.

Chung, T. J.↗
NASA NTRS1973

Self-recording portable soil penetrometer

A lightweight portable penetrometer for testing soil characteristics is described. The penetrometer is composed of a handle, data recording, and probe components detachably joined together. The data recording component has an easily removed recording drum which rotates according to the downward force applied on the handle, and a stylus means for marking the drum along its height according to the penetration depth of probe into the soil.

Costes, N. C.↗
NASA NTRS1973

Soil mechanics

The soil mechanics experiment on the Apollo 17 mission to the Taurus-Littrow area of the moon is discussed. The objectives of the experiment were to determine the physical characteristics and mechanical properties of the lunar soil at the surface and subsurface in lateral directions. Data obtained on the lunar surface in conjunction with observations of returned samples of lunar soil are used to determine in-place density and porosity profiles and to determine strength characteristics on local and regional scales.

Mitchell, J. K.↗
NASA NTRS1973

Surface soil variability and stratigraphy at the Apollo 16 site

The results of penetration tests, analyses of footprint and Lunar Roving Vehicle track depths, and core tube sample data have been used to deduce details of near-surface stratigraphy (to depths of several tens of cm) and lateral variability in soil conditions. Local variations (meter scale) in penetration resistance and porosity may be large, and soil stratigraphy may be complex. Since average properties are about the same at all sites, these variations probably reflect individual cratering and depositional events. These local variations cannot be anticipated on the basis of surface appearance or behavior.

Mitchell, J. K.↗
NASA NTRS1972

Mobility performance of the lunar roving vehicle: Terrestrial studies: Apollo 15 results

The constriants of the Apollo 15 mission dictated that the average and limiting performance capabilities of the first manned lunar roving vehicle be known or estimated within narrow margins. Extensive studies were conducted and are compared with the actual performance of the lunar roving vehicle during the Apollo 15 mission. From this comparison, conclusions are drawn relating to the capabilities and limitation of current terrestrial methodology in predicting the mobility performance of lunar roving vehicles under in-situ environmental conditions, and recommendations are offered concerning the performance of surface vehicles on future missions related to lunar or planetary exploration.

Costes, N. C.↗
NASA NTRS1972

Soil mechanical properties at the Apollo 14 site.

The Apollo 14 lunar landing provided a greater amount of information on the mechanical properties of the lunar soil than previous missions. Measurements on core-tube samples and the results of transporter track analyses indicate that the average density of the soil in the Fra Mauro region is in the range from 1.45 to 1.60 g/cu cm. The soil strength appears to be higher in the vicinity of the site of the Apollo 14 lunar surface experiments package, and trench data suggest that strength increases with depth. Lower-bound estimates of soil cohesion give values of 0.03 to 0.10 kN/sq m, which are lower than values of 0.35 to 0.70 kN/sq m estimated for soils encountered in previous missions. The in situ modulus of elasticity, deduced from the measured seismic-wave velocity, is compatible with that to be expected for a terrestrial silty fine sand in the lunar gravitational field.

Mitchell, J. K.↗
NASA NTRS1972

Soil mechanics experiment

The Apollo 15 soil-mechanics experiment has offered greater opportunity for study of the mechanical properties of the lunar soil than previous missions, not only because of the extended lunar-surface stay time and enhanced mobility provided by the lunar roving vehicle (rover), but also because four new data sources were available for the first time. These sources were: (1) the self-recording penetrometer (SRP), (2) new, larger diameter, thin-walled core tubes, (3) the rover, and (4) the Apollo lunar-surface drill (ALSD). These data sources have provided the best bases for quantitative analyses thus far available in the Apollo Program.

Mitchell, J. K.↗
NASA NTRS1972

Soil mechanics

Preliminary results are presented of an investigation of the physical and mechanical properties of lunar soil on the Descartes slopes, and the Cayley Plains in the vicinity of the LM for Apollo 16. The soil mechanics data were derived form (1) crew commentary and debriefings, (2) television, (3) lunar surface photography, (4) performance data and observations of interactions between soil and lunar roving vehicle, (5) drive-tube and deep drill samples, (6) sample characteristics, and (7) measurements using the SRP. The general characteristics, stratigraphy and variability are described along with the core samples, penetrometer test results, density, porosity and strength.

Mitchell, J. K.↗
NASA NTRS1972

On a yield surface for granular materials.

A special plasticity theory for soils in a triaxial compression drained condition which was extracted from a general theory of soil plasticity presented by Aguirre-Ramirez is generalized for three-dimensional complex stress fields. A theory for plane-strain is then constructed from the generalized three-dimensional theory. Both theories are then compared and found to be in agreement with the corresponding theories presented by Roscoe and Burland at Cambridge.

Aguirre-Ramirez, G.↗