Search NASA⌕ Search

Engineering topics

Daniel, Claus

Publications and source records attributed to Daniel, Claus.

At least 91 records · Page 5

Monolithic Composite Electrodes Comprising Silicon Nanoparticles Embedded in Lignin-derived Carbon Fibers for Lithium-Ion Batteries

Here, we report direct manufacturing of high-capacity carbon/silicon composite fiber electrodes for lithium-ion batteries produced via a flexible low-cost melt processing route, yielding low-cost stable silicon particles coated in situ by a 10 nanometer thick protective silica layer. Moreover, the core–shell silicon/SiO 2 islands are embedded in electrochemically active and electronically conductive carbon fiber derived from lignin precursor material. The silicon–silica–carbon composites exhibit capacities exceeding 700 mAh g -1 with Coulombic efficiencies in excess of 99.5 %. Finally, the high efficiency, stability, and rate capability are linked to the nanocrystalline structure and abundant, uniform nanometer-thick SiO 2 interfaces that are produced during the spinning and subsequent pyrolysis of the precursor blend.

25 ENERGY STORAGE↗

High throughput parallel backside contacting and periodic texturing for high-efficiency solar cells

Disclosed are configurations of long-range ordered features of solar cell materials, and methods for forming same. Some features include electrical access openings through a backing layer to a photovoltaic material in the solar cell. Some features include textured features disposed adjacent a surface of a solar cell material. Typically the long-range ordered features are formed by ablating the solar cell material with a laser interference pattern from at least two laser beams.

14 SOLAR ENERGY↗

Cathode materials review

The electrochemical potential of cathode materials defines the positive side of the terminal voltage of a battery. Traditionally, cathode materials are the energy-limiting or voltage-limiting electrode. One of the first electrochemical batteries, the voltaic pile invented by Alessandro Volta in 1800 (Phil. Trans. Roy. Soc. 90, 403-431) had a copper-zinc galvanic element with a terminal voltage of 0.76 V. Since then, the research community has increased capacity and voltage for primary (nonrechargeable) batteries and round-trip efficiency for secondary (rechargeable) batteries. Successful secondary batteries have been the lead-acid with a lead oxide cathode and a terminal voltage of 2.1 V and later the NiCd with a nickel(III) oxide-hydroxide cathode and a 1.2 V terminal voltage. The relatively low voltage of those aqueous systems and the low round-trip efficiency due to activation energies in the conversion reactions limited their use. In 1976, Wittingham (J. Electrochem. Soc., 123, 315) and Besenhard (J. Power Sources 1(3), 267) finally enabled highly reversible redox reactions by intercalation of lithium ions instead of by chemical conversion. In 1980, Goodenough and Mizushima (Mater. Res. Bull. 15, 783-789) demonstrated a high-energy and high-power LiCoO{sub 2} cathode, allowing for an increase of terminal voltage far beyond 3 V. Over the past four decades, the international research community has further developed cathode materials of many varieties. Current state-of-the-art cathodes demonstrate voltages beyond any known electrolyte stability window, bringing electrolyte research once again to the forefront of battery research.

25 ENERGY STORAGE↗

Fabrication and characterization of high energy density lithium-rich nickel manganese cobalt oxide cathode thin films

This paper reports a method to prepare Li-rich NMC (Li1.2Mn0.55Ni0.15Co0.1O2) thin film cathodes for Li-ion batteries using magnetron sputtering and post-annealing in O2. The use of thin films with no binder and conductive additives enables to study in detail the surface reaction chemistry upon cycling as well as the microstructural changes in the bulk. We show that it is essential to control the deposition pressure to obtain the expected layered(R-3m)-layered(C2/m) structure, thus providing large reversible capacities up to 270 mAh g-1 and voltage profiles close to those expected. This is substantiated by TEM/SAED results showing that the films consist of a layered structure with trigonal symmetry in which Li/TM ordering is achieved. The study of various XPS core levels determines that the surface is comprised of Mn4+, Co3+ and Ni2+ cations inside an O2- framework. The losses mechanisms are studied during long cycling. After 184 cycles, the microstructure does not reveal the presence of Li/TM ordering, which supports that Li2MnO3 conversion is irreversible. In addition, we characterize that the surface chemistry evolves significantly upon cycling. The surface of cycled discharged electrodes is mostly made of inorganic species (LiF, Lix POy Fz , LixPFy), along with small amounts of organic species with C-O and O-C=O groups such as PEO, LiOR and LiCO2R. Moreover, the results support that Ni and Co migrate into the bulk whereas Mn is enriched at the surface. In the case of Mn, the reduction of Mn4+ into Mn3+ is clearly evidenced, as expected from the activation of Li2MnO3 domains.

Baggetto, Loic↗

2013 Estorm - Invited Paper - Cathode Materials Review

The electrochemical potential of cathode materials defines the positive side of the terminal voltage of a battery. Traditionally, cathode materials are the energy-limiting or voltage-limiting electrode. One of the first electrochemical batteries, the voltaic pile invented by Alessandro Volta in 1800 (Phil. Trans. Roy. Soc. 90, 403 431) had a copper-zinc galvanic element with a terminal voltage of 0.76 V. Since then, the research community has increased capacity and voltage for primary (nonrechargeable) batteries and round-trip efficiency for secondary (rechargeable) batteries. Successful secondary batteries have been the lead acid with a lead oxide cathode and a terminal voltage of 2.1 V and later the NiCd with a nickel(III) oxide hydroxide cathode and a 1.2 V terminal voltage. The relatively low voltage of those aqueous systems and the low round-trip efficiency due to activation energies in the conversion reactions limited their use. In 1976, Wittingham (J. Electrochem. Soc., 123, 315) and Besenhard (J Power Sources 1(3), 267) finally enabled highly reversible redox reactions by intercalation of lithium ions instead of by chemical conversion. In 1980, Goodenough and Mizushima (Mater. Res. Bull. 15, 783 789) demonstrated a high-energy and high-power LiCoO2 cathode, allowing for an increase of terminal voltage far beyond 3 V. Over the past four decades, the international research community has further developed cathode materials of many varieties. Current state-of-the-art cathodes demonstrate voltages beyond any known electrolyte stability window, bringing electrolyte research once again to the forefront of battery research.

Daniel, Claus↗

USFOE: Extended Summary - Lithium ion batteries and their manufacturing challenges

There is no one lithium ion battery. With the variety of materials and electrochemical couples at our disposal as shown in the previous talks, we have the opportunity to design battery cells specific for their applications. Such applications require optimization of voltage, state of charge utilization, lifetime needs, and safety considerations. Electrochemical couples allow for designing power and energy ratios and available energy for the application. Integration in a large format cell requires optimized roll to roll electrode manufacturing and active material utilization. Electrodes are coated on a current collector in a composite structure comprised of active material, binders, and conductive additives which requires careful control of colloidal chemistry, adhesion, and solidification. These added inactive materials and the cell packaging reduce energy density. Degree of porosity and compaction in the electrode can impede or enhance battery performance. Pathways are explored to bring batteries from currently commercially available 100Wh/kg and 200Wh/L at $500/kWh to 250Wh/kg and 400Wh/L at $125/kWh.

Daniel, Claus↗

Neutron Diffraction and Magnetic Susceptibility Studies on a High-Voltage Li 1.2 Mn 0.55 Ni 0.15 Co 0.10 O 2 Lithium Ion Battery Cathode: Insight into the Crystal Structure

Lithium- and manganese-rich oxides undergo structural transformation and/or atomic rearrangements during the delithiation/lithiation process and ultimately suffer from several issues such as first cycle irreversible capacity and voltage fade. In order to understand the mechanism of these issues, perception of a detailed crystal structure of pristine material is obviously demanding. In this study, combined powder neutron diffraction (ND) and temperature-dependent magnetic susceptibility techniques were employed to investigate the structure of a pristine lithium- and manganese-rich Li1.2Mn0.55Ni0.15Co0.10O2 cathode oxide. Rietveld refinement on the experimental ND pattern yields good fits by considering either Li2MO3 (M = Co, Mn, Ni) type monoclinic (C2/m space group) phase with 1% of Ni residing in the 4h lithium site or a composite structure consisting of 50% of Li2MnO3 type monoclinic (C2/m space group) and 50% LiMO2 (M = Co, Mn, Ni) type trigonal (R$\bar{3}$m space group) structure. In the composite structure, 3% Li/Ni site exchange in the trigonal phase is also proposed. Further, temperature-dependent dc magnetic susceptibility shows Curie–Weiss paramagnetic behavior at T ≥ 100 K, and no ordering/deviation of the field cooling (FC) curve in the temperature range 2–320 K indicates the random distribution of metal ions in the transition metal (TM) layer in the trigonal phase. Bifurcation of the zero-field cooling (ZFC) curve from the FC curve showing a magnetic ordering at TN 50 K reveals the presence of cation ordering in the TM layers arising from a distinct Li2MnO3-like phase. These results suggest that the lithium- and manganese-rich oxide with a composition Li1.2Mn0.55Ni0.15Co0.10O2 is more likely a composite of monoclinic and trigonal phases. The report also highlights the unique materials diagnostic capability of combined ND and magnetic susceptibility techniques to obtain detailed structural information of complex oxide systems.

Mohanty, Debasish↗

Final Report - Recovery Act - Development and Application of Processing and Process Control for Nano-Composite Materials for Lithium Ion Batteries

Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points.

Nuclear Criticality Safety Program (NCSP)↗

Solid lithium ion conducting electrolytes and methods of preparation

A composition comprised of nanoparticles of lithium ion conducting solid oxide material, wherein the solid oxide material is comprised of lithium ions, and at least one type of metal ion selected from pentavalent metal ions and trivalent lanthanide metal ions. Solution methods useful for synthesizing these solid oxide materials, as well as precursor solutions and components thereof, are also described. The solid oxide materials are incorporated as electrolytes into lithium ion batteries.

36 MATERIALS SCIENCE↗

In situ AFM studies on lithium (de)intercalation-induced morphology changes in a LixCoO2 micro-machined thin film electrode

Structural instability due to intercalation-induced stresses in electrode materials is one of the key degradation mechanisms of Li-ion batteries. Fragmentation of material degrades structural integrity and electrical resistance, and also accelerates harmful side reactions. In situ experiments are the appropriate approach to investigate the actual time dependent nature of behavior changes of an electrode material while it is charged and discharged. In the current work, a unique in situ electrochemical atomic force microscopy (ECAFM) measurement is made on samples of cylindrical shape, which are micro-machined by focused ion beam (FIB) microscopy. This pre-defined geometry allows the exclusion of secondary, non-active materials from the electrochemically active material as well as the removal of any vagueness coming from the irregular geometry of particles. Also, the experimental results are used to validate a proposed coupled electrochemical and mechanical model for determination of the stress-strain state of active electrode material during electrochemical cycling. The results produced using the model correlate the experimental data rather well. The combined results reveal the key effects of the geometry, kinetics, and mechanics of electrode materials on the stress-strain state, which is a barometer of structural stability of a material.

Park, Jonghuyn↗

Analysis of composite electrolytes with sintered reinforcement structure for energy storage applications

Effective conductivity and mechanical properties of composite polymer electrolytes, in which the reinforcement phase is a sintered packed bed of Li-ion conductive ceramics particles, were estimated using Finite Element Analyses. The computations targeted estimation of the effect of sintering degree, i.e. size of the inter-particle connective necks, on the overall properties of the composite. Methods for microstructure generation and computational procedures were presented. The mechanical ability of the membrane to block lithium dendrites was assessed based on a stability criterion, which depends on the computed effective stiffness. It was found that the minimum size of the inter-particle connections necessary to provide mechanical stability without losing the enhancement in conductivity was 0.05 times the mean particle radius.

Kalnaus, Sergiy↗

Correlating cation ordering and voltage fade in a lithium–manganese-rich lithium-ion battery cathode oxide: a joint magnetic susceptibility and TEM study

Structure–electrochemical property correlation is presented for lithium–manganese-rich layered–layered nickel manganese cobalt oxide (LMR–NMC) having composition Li1.2Co0.1Mn0.55Ni0.15O2 (TODA HE5050) in order to examine the possible reasons for voltage fade during short-to-mid-term electrochemical cycling. The Li1.2Co0.1Mn0.55Ni0.15O2 based cathodes were cycled at two different upper cutoff voltages (UCV), 4.2 V and 4.8 V, for 1, 10, and 125 cycles; voltage fade was observed after 10 and 125 cycles only when the UCV was 4.8 V. Magnetic susceptibility and selected-area electron diffraction data showed the presence of cation ordering in the pristine material, which remained after 125 cycles when the UCV was 4.2 V. When cycled at 4.8 V, the magnetic susceptibility results showed the suppression of cation ordering after one cycle; the cation ordering diminished upon further cycling and was not observed after 125 cycles. Selected-area electron diffraction data from oxides oriented towards the [0001] zone axis revealed a decrease in the intensity of cation-ordering reflections after one cycle and an introduction of spinel-type reflections after 10 cycles at 4.8 V; after 125 cycles, only the spinel-type reflections and the fundamental O3 layered oxide reflections were observed. A significant decrease in the effective magnetic moment of the compound after one cycle at 4.8 V indicated the presence of lithium and/or oxygen vacancies; analysis showed a reduction of Mn4+ (high spin/low spin) in the pristine oxide to Mn3+ (low spin) after one cycle. The effective magnetic moment was higher after 10 and 125 cycles at 4.8 V, suggesting the presence of Mn3+ in a high spin state, which is believed to originate from distorted spinel (Li2Mn2O4) and/or spinel (LiMn2O4) compounds. The increase in effective magnetic moments was not observed when the oxide was cycled at 4.2 V, indicating the stability of the structure under these conditions. This study shows that structural rearrangements in the LMR–NMC oxide happen only at higher potentials (4.8 V, for example) and provides evidence of a direct correlation between cation ordering and voltage fade.

Mohanty, Debasish↗