Search NASA⌕ Search

Engineering topics

Dickie, Diane A.

Publications and source records attributed to Dickie, Diane A..

At least 19 records

Pre-equilibrium reactions involving pendent relays improve CO 2 reduction mediated by molecular Cr-based electrocatalysts

Homogeneous earth abundant transition-metal electrocatalysts capable of carbon dioxide (CO 2 ) reduction to generate value-added chemical products are a possible strategy to minimize rising anthropogenic CO 2 emissions. Previously, it was determined that Cr-centered bipyridine-based N 2 O 2 complexes for CO 2 reduction are kinetically limited by a proton-transfer step during C–OH bond cleavage. Therefore, it was hypothesized that the inclusion of pendent relay groups in the secondary coordination sphere of these molecular catalysts could increase their catalytic activity. Here, it is shown that the introduction of a pendent methoxy group favorably impacts a pre-equilibrium protonation prior to the catalytic resting state, resulting in a significant increase in catalytic activity without a loss of product selectivity for generating carbon monoxide (CO) from CO 2 . Interestingly, combining the pendent methoxy group with a cationic acid causes a positive shift of the catalytic reduction potential of the system, while maintaining increased activity and quantitative selectivity. This work suggests that tuning the secondary coordination sphere with respect to cationic proton sources can result in activity improvements by modifying the kinetic and thermodynamic aspects of proton transfer in the catalytic cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocluster superstructures assembled via surface ligand switching at high temperature

Superstructures with nanoscale building blocks, when coupled with precise control of the constituent units, open opportunities in rationally designing and manufacturing desired functional materials. Yet, synthetic strategies for the large-scale production of superstructures are scarce. We report a scalable and generalized approach to synthesizing superstructures assembled from atomically precise Ce24O28(OH)8 and other rare-earth metal-oxide nanoclusters alongside a detailed description of the self-assembly mechanism. Combining operando small-angle X-ray scattering, ex situ molecular and structural characterizations, and molecular dynamics simulations indicates that a high-temperature ligand-switching mechanism, from oleate to benzoate, governs the formation of the nanocluster assembly. The chemical tuning of surface ligands controls superstructure disassembly and reassembly, and furthermore, enables the synthesis of multicomponent superstructures. Here, this synthetic approach, and the accurate mechanistic understanding, are promising for the preparation of superstructures for use in electronics, plasmonics, magnetics and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparisons of bpy and phen Ligand Backbones in Cr-Mediated (Co-)Electrocatalytic CO 2 Reduction

Due to the rise in atmospheric carbon dioxide (CO 2 ) concentrations, there is a need for the development of new strategies to enhance the selectivity and activity of the electrocatalytic conversion of CO 2 to value-added products. The incorporation of redox mediators (RMs) as co-catalysts to enhance the transfer of redox equivalents during catalysis has been gaining more attention in recent years across a variety of small molecule transformations. We have shown that using Cr-centered complexes with sulfone-based RMs leads to an enhancement of CO 2 reduction electrocatalysis under protic conditions via an inner-sphere mechanism. In these co-catalytic systems, an oxygen atom of the reduced RM binds to the Cr center to form a key intermediate stabilized by pancake bonding between the reduced aromatic components of the catalyst ligand backbone and the RM. This interaction facilitates the transfer of an electron and accesses a more kinetically favorable reaction pathway. Here, we show that expanding the aromatic character of the ligand backbone of the catalyst as well as the RM can cause a greater enhancement of co-electrocatalytic activity. These results suggest that further activity improvements can be achieved by focusing on the kinetic and thermodynamic parameters which control association between the catalyst and RM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase-transition-induced thermal hysteresis in Type-II weyl semimetals M o T e 2 and M o 1 − x W x T e 2

The resistivity versus temperature measurement is commonly used for identifying temperature-induced phase-change and the resulting hysteresis loop. However, while the resistance is influenced by both the density of states and the carrier lifetimes, the Seebeck coefficient is influenced predominantly by the density of states, and hence is a better probe of the phase of the material. Here, 1T'-T d temperature-induced phase transition in MoTe 2 is studied using temperature-dependent X-ray diffraction, resistivity, and Seebeck coefficient measurements. A more distinct hysteresis is observed when measuring the Seebeck coefficient which is consistent with direct measurements of the crystallographic angle using the temperature-dependent X-ray diffraction. The Seebeck and electrical resistivity measurements indicate a competing contribution of the electrons and holes. The contribution of electron pockets becomes more dominant when molybdenum atoms are replaced by tungsten. In MoTe 2 , a topologically induced enhancement of the Nernst coefficient is observed at low temperatures and a relatively large phase-transition induced Thomson coefficient of 111 μV∙K -1 is measured at 254 K.

36 MATERIALS SCIENCE↗

Catalytic Hydrogenolysis of the Pt-OPh Bond of a Molecular Pt(II) Complex using Silica Supported Pd, Rh and Pt Nanoparticles

We report silica-supported Pd, Rh and Pt metal nanoparticles catalyze the hydrogenolysis of the Pt-OPh bond of ( t bpy)Pt(OPh)Cl to release PhOH. Based on kinetic studies monitored by 1 H NMR spectroscopy, the reactivity trend is Pd>Rh>Pt. Kinetic studies with Pd/SiO 2 are consistent with a first-order dependence on the catalyst and the molecular Pt(II) complex ( t bpy)Pt(OPh)Cl. Using TEM-EDS mapping and ICP-OES measurements of a recovered Pd catalyst, after 1hour of hydrogenolysis of ( t bpy)Pt(OPh)Cl, approximately 10–16 % Pt deposition (relative to Pd mol %) on the Pd/SiO 2 surface was quantified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-Deficient Ru(II) Complexes as Catalyst Precursors for Ethylene Hydrophenylation

Ruthenium(II) complexes with the general formula TpRu(L)(NCMe)Ph (Tp = hydrido(trispyrazolyl)borate, L = CO, PMe 3 , P(OCH 2 ) 3 CEt, P(pyr) 3 , P(OCH 2 ) 2 (O)CCH 3 ) have previously been shown to catalyze arene alkylation via Ru-mediated arene C–H activation including the conversion of benzene and ethylene to ethylbenzene. Previous studies have suggested that the catalytic performance of these TpRu(II) catalysts increases with reduced electron-density at the Ru center. Herein, three new structurally related Ru(II) complexes are synthesized, characterized, and studied for possible catalytic benzene ethylation. TpRu(NO)Ph 2 exhibited low stability due to the facile elimination of biphenyl. The Ru(II) complex (Tp Br3 )Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph (Tp Br3 = hydridotris(3,4,5-tribromopyrazol-1-yl)borate) showed no catalytic activity for the conversion of benzene and ethylene to ethylbenzene, likely due to the steric bulk introduced by the bromine substituents. (Ttz)Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph (Ttz = hydridotris(1,2,4-triazol-1-yl)borate) catalyzed approximately 150 turnover numbers (TONs) of ethylbenzene at 120 °C in the presence of Lewis acid additives. Here, we compare the activity and features of catalysis using (Ttz)Ru(NCMe)(P(OCH 2 ) 3 CEt)Ph to previously reported catalysis based on TpRu(L)(NCMe)Ph catalyst precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manganese Catalyzed Partial Oxidation of Light Alkanes

The catalytic partial oxidation of methane is achieved at low temperatures (<200 °C) using manganese oxides and manganese salts in mixtures of trifluoroacetic acid and trifluoroacetic anhydride. Dioxygen is used as the in situ terminal oxidant. For Mn oxides (e.g., MnO 2 , Mn 2 O 3 , and Mn 3 O 4 ), we studied stoichiometric methane partial oxidation in HTFA (TFA = trifluoroacetate). Using a Mn trifluoroacetate salt, at 180 °C and under 25 psig of methane, product selectivity for the mono-oxidized product methyl trifluoroacetate (MeTFA) is observed to be >90% at ~35% methane conversion at approximately 6 turnovers. Under our catalytic methane oxidation reaction conditions, MeTFA is stable against overoxidation, which explains the likely high selectivity at conversions >15%. Using combined experimental studies and DFT calculations, a mechanism involving soluble and molecular Mn species in the catalytic cycle is proposed. The proposed reaction pathway involves initial activation of Mn II by dioxygen, cleavage of a methane C–H bond by a Mn III hydroxo intermediate, rebound of the methyl radical to generate MeTFA, and finally regeneration of the starting Mn II complex. Also, this process is shown to be applicable to the oxidation of ethane, favoring the mono-oxidized product ethyl trifluoroacetate (EtTFA) and reaching ~46% conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Immobilization of “Capping Arene” Cobalt(II) Complexes on Ordered Mesoporous Carbon for Electrocatalytic Water Oxidation

We report the synthesis, characterization, and electrocatalytic water oxidation activity of two cobalt complexes, (6-FP)Co(NO 3 ) 2 (1) (6-FP = 8,8'-(1,2-phenylene)diquinoline) and (5-FP)Co(NO 3 ) 2 (2) (5-FP = 1,2-bis(N-7-azaindolyl)benzene), containing "capping arene" bidentate ligands with nitrogen atom donors. The cobalt complexes 1 and 2 were supported on ordered mesoporous carbon (OMC) by π-π stacking, resulting in heterogenized cobalt materials 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, respectively, and studied for electrocatalytic water oxidation. We find that 6-FP-Co-OMC-1 exhibits an overpotential of 355 mV for a current density of 10 mA cm -2 and a turnover frequency (TOF) of ~0.53 s -1 at an overpotential of 400 mV at pH 14. 6-FP-Co-OMC-1 exhibits activity that is ~1.6 times that of 5-FP-Co-OMC-2, which gives a TOF of 0.32 s -1 at 400 mV overpotential. The structural stability of the single-atom Co site was demonstrated for 6-FP-Co-OMC-1 using X-ray absorption spectroscopy for the molecular complex supported on OMC, but slow degradation in catalyst activity can be attributed to eventual formation of Co oxide clusters. DFT computations of electrocatalytic water oxidation using the molecular complexes as models provide a description of the catalytic mechanism. These studies reveal that the mechanism for O-O bond formation involves an intermediate Co IV oxo complex that undergoes an intramolecular reductive O-O coupling to form a Co II -OOH species. Further, the calculations predict that the molecular 6-FP-Co structure is more active for electrocatalytic water oxidation than 5-FP-Co, which is consistent with experimental studies of 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, highlighting the possibility that the ligand structure influences the catalytic activity of the supported molecular catalysts.

25 ENERGY STORAGE↗

Wake-up and fatigue mechanisms in ferroelectric Hf 0.5 Zr 0.5 O 2 films with symmetric RuO 2 electrodes

In this work, the mechanisms leading to wake-up and fatigue in ferroelectric hafnium zirconium oxide thin film devices with symmetric RuO 2 electrodes are investigated via polarization, relative permittivity, dielectric nonlinearity, pyroelectric coefficient, and microfocus X-ray diffraction (XRD) measurements. The devices are observed to wake-up for up to 10 3 bipolar pulsed field cycles, after which fatigue occurs with the polarization approaching zero following 10 8 cycles. Wake-up is accompanied by a decrease in both high-field permittivity and hysteresis loop pinching and an increase in pyroelectric coefficient, indicating that the wake-up process involves a combination of transformations from the tetragonal to the orthorhombic phase and domain depinning from defect redistribution. Fatigue is observed to coincide with an increase in irreversible domain wall motion and a decrease in pyroelectric coefficient. Finite pyroelectric coefficients are measured on fully fatigued devices, indicating that domain pinning is a strong contributor to fatigue and that fatigued devices contain domain structures that are unable to switch under the fields applied for measurement. Microfocus XRD patterns measured on each device reveal that the phase constitution is qualitatively unaffected by the field cycling and resultant polarization fatigue. This data indicates that the wake-up process has contributions from both phase transformations and domain depinning, whereas the fatigue process is driven primarily by domain pinning, and the near-zero measured switchable polarization is actually a poled device with immobile domains. These observations provide insight into the physical changes occurring during field cycling of HfO 2 -based ferroelectrics while examining a possible oxide electrode material for silicon CMOS device implementation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pendent Relay Enhances H 2 O 2 Selectivity during Dioxygen Reduction Mediated by Bipyridine-Based Co–N 2 O 2 Complexes

Generally, cobalt–N 2 O 2 complexes show selectivity for hydrogen peroxide during electrochemical dioxygen (O 2 ) reduction. We recently reported a Co(III)–N 2 O 2 complex with a 2,2'-bipyridine-based ligand backbone which showed alternative selectivity: H 2 O was observed as the primary reduction product from O 2 (71 ± 5%) with decamethylferrocene as a chemical reductant and acetic acid as a proton donor in methanol solution. We hypothesized that the key selectivity difference in this case arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(III)–hydroperoxide species. To interrogate this hypothesis, in this study we have prepared a new Co(III) compound that contains pendent –OMe groups poised to direct protonation toward the proximal O atom of this hydroperoxo intermediate. Mechanistic studies in acetonitrile (MeCN) solution reveal two regimes are possible in the catalytic response, dependent on added acid strength and the presence of the pendent proton donor relay. In the presence of stronger acids, the activity of the complex containing pendent relays becomes O 2 dependent, implying a shift to Co(III)–superoxide protonation as the rate-determining step. Interestingly, the inclusion of the relay results in primarily H 2 O 2 production in MeCN, despite minimal difference between the standard reduction potentials of the three complexes tested. EPR spectroscopic studies indicate the formation of Co(III)–superoxide species in the presence of exogenous base, with greater O 2 reactivity observed in the presence of the pendent –OMe groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Noncovalent Immobilization of Pentamethylcyclopentadienyl Iridium Complexes on Ordered Mesoporous Carbon for Electrocatalytic Water Oxidation

The attachment of molecular catalysts to conductive supports for the preparation of solid-state anodes is important for the development of devices for electrocatalytic water oxidation. The preparation and characterization of three molecular cyclopentadienyl iridium(III) complexes, Cp*Ir(1-pyrenyl(2-pyridyl)ethanolate-κO,κN)Cl (1) (Cp* = pentamethylcyclopentadienyl), Cp*Ir(diphenyl(2-pyridyl)methanolate-κO,κN)Cl (2), and [Cp*Ir(4-(1-pyrenyl)-2,2'-bipyridine)Cl]Cl (3), as precursors for electrochemical water oxidation catalysts, are reported. These complexes contain aromatic groups that can be attached via noncovalent π-stacking to ordered mesoporous carbon (OMC). The resulting iridium-based OMC materials (Ir-1, Ir-2, and Ir-3) were tested for electrocatalytic water oxidation leading to turnover frequencies (TOFs) of 0.9–1.6 s -1 at an overpotential of 300 mV under acidic conditions. The stability of the materials is demonstrated by electrochemical cycling and X-ray absorption spectroscopy analysis before and after catalysis. Theoretical studies on the interactions between the molecular complexes and the OMC support provide insight onto the noncovalent binding and are in agreement with the experimental loadings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗