Search NASA⌕ Search

Engineering topics

Dickson, Peter

Publications and source records attributed to Dickson, Peter.

27 records · Page 2

LANL Skid Testing Summary

Our improved understanding of the processes occurring during complex drop / skid events has explained the previously observed scatter in skid and drop test data, and provided new insights into effective mitigation strategies. However, it has been perceived to undermine our current safety assumptions, which is inaccurate. We have no reason to believe that our safety margin from HEVR (the event of concern) is any different to that previously assumed – we just have a much better experimental and theoretical basis by which to measure it more accurately. Until this work is complete or, at least, more mature, we cannot draw any conclusions on whether we are more or less safe than we thought, but we know that use of cushioned surfaces, along with sensible housekeeping, mitigates the potential activation of the skid-grit mechanism.

36 MATERIALS SCIENCE↗

The Effect of Grit on Frictional Heating During Oblique Impacts with PBX 9501

Technicians working at the Pantex Plant routinely perform assembly/disassembly operations on weapons containing plastic-bonded explosives (PBXs). With high explosives (HE) operations comes the potential for high consequence accidents. As a result, a process for hazard analysis has been developed within the DOE-NNSA complex to identify and prevent HE-related accidents. Part of this process is to perform research to support or reject the safety basis upon which plant operations are authorized. Understanding the physics of HE response to a variety of mechanical and thermal insults is valuable to this process to: 1) assess risk probability to rank scenarios for the purpose of focusing resources to maximize benefit; 2) define screening thresholds to minimize risk for when an accident does occur; and 3) to develop engineered controls and administrative strategies to mitigate consequences when an accident occurs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probability Calculation of Grit-Grit Interaction on a Plastic Bonded Explosive During Glancing Impacts

Recent experiments indicate that frictionally heated grit can act as effective hot spots for the ignition of PBX 9501 (Parker et al. (2013)). The most common mode for hot spot formation is when a piece of grit is dragged by the explosive across a high melting point surface, such as steel. This leads to a hot spot with a temperature of the melting point of the surface. For high melting point surfaces this can be hot enough to lead to ignition. It is believed that an easy way to mitigate this is to use surfaces with low melting points, which means the hot spots formed cannot become hot enough to ignite the explosive during the duration of the impact (Bowden and Gurton (1948)). However, when surfaces have a similar hardness to the PBX (such as many plastics), hot spots of sufficient temperature for ignition can still be formed by the collision of two grit particles, one being dragged by the PBX with the other being stationary on the surface. In order to mitigate the probability of ignition it is desirable to know how clean the work surfaces need to be in order to minimize the acceptable risk of an event. Two cases need to be considered: first, what is probability that a dropped piece of PBX will contact one or more grit particles? This will lead to an estimate of how ”clean” a surface needs to be when working with unmitigated, high-melting point surfaces. Second, what is the probability that a dropped piece of PBX will lead to a collision between two or more grit particles? This will give an estimate how clean a surface needs to be when working with low melting point surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of Pressure and Venting on the Slow Cookoff of PBX 9502 in the Intermediate-Scale Bucket Test

This project is intended to investigate safety issues arising from exposure of insensitive high explosives (IHE) to elevated thermal environments. We performed a series of tests, at a subsystem level, to determine the likelihood of high explosive violent response (HEVR) or deflagration-to-detonation transition (DDT) for PBX 9502 and to provide time-to-ignition, temperature and pressure data for cookoff model development and verification. This work is also intended to inform the development of a full-system representative conservative accident scenario (RCAS) test.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Falling Man Impact Experiments: The Response of Materials to Low Velocity Penetrating Impacts with Simulated Human Impact Dynamics

Experiments were performed to examine the response of high explosives (HE) and HE cased in U6Nb to low velocity, penetrating impacts with pointed hand tools. The energy for these impacts arises from the mass and velocity of a 95th percentile mass Pantex worker. Early attempts to estimate force and energy from “Falling Man” scenarios were made with unrealistic rigid body assumptions. These early results estimated energy levels that were excessively high. The methodology for generating these estimates was deemed overly conservative and, as an alternative, an experimental program was initiated to measure accurate impact dynamics and then test representative targets with simulated human impact dynamics. The results of this experiment=based approach are presented in this report.

36 MATERIALS SCIENCE↗

Violent Reactions and DDT in Hot, Thermally Damaged HMX-Based PBXs

Conventional high explosives (e.g. PBX 9501, LX-07) have been observed to react violently following thermal insult: (1) Fast convective and compressive burns (HEVR); (2) Thermal explosions (HEVR); and (3) Deflagration-to-detonation transition (DDT). No models exist that sufficiently capture/predict these complex multiphase and multiscale behaviors. For now, research is focused on identifying vulnerabilities and factors that control this behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frictionally induced ignition processes in drop and skid tests

The standard LANL/Pantex drop and skid tests rely on subjective assessment of reaction violence to quantify the response of the charge, and completely miss nonpropagating hot-spot ignition sites. Additionally, large variations in test results have been observed, which we propose is due to a misunderstanding of the basic physical processes that lead to threshold ignition in these tests. The tests have been redesigned to provide control of these mechanisms and to permit direct observation of hot spots at the impact site, allowing us to follow the progression of the outcome as the drop height and ignition source density are varied. The results confirm that frictional interactions between high-melting-point solids are the dominant ignition mechanism, not just at the threshold, but in fact at all realistic drop heights.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Testing and modeling of PBX-9591 shock initiation

This paper describes an ongoing effort to develop a detonation sensitivity test for PBX-9501 that is suitable for studying pristine and damaged HE. The approach involves testing and comparing the sensitivities of HE pressed to various densities and those of pre-damaged samples with similar porosities. The ultimate objectives are to understand the response of pre-damaged HE to shock impacts and to develop practical computational models for use in system analysis codes for HE safety studies. Computer simulation with the CTH shock physics code is used to aid the experimental design and analyze the test results. In the calculations, initiation and growth or failure of detonation are modeled with the empirical HVRB model. The historical LANL SSGT and LSGT were reviewed and it was determined that a new, modified gap test be developed to satisfy the current requirements. In the new test, the donor/spacer/acceptor assembly is placed in a holder that is designed to work with fixtures for pre-damaging the acceptor sample. CTH simulations were made of the gap test with PBX-9501 samples pressed to three different densities. The calculated sensitivities were validated by test observations. The agreement between the computed and experimental critical gap thicknesses, ranging from 9 to 21 mm under various test conditions, is well within 1 mm. These results show that the numerical modeling is a valuable complement to the experimental efforts in studying and understanding shock initiation of PBX-9501.

36 MATERIALS SCIENCE↗

Demonstration of a multi-channel, low-profile wire gauge for tracing wave development and detonation turning in explosives

The multi-channel low-profile wire gauge is a device which measures high pressure wave position via the continuous variation in length of a conductor in conjunction with a fiducial, allowing in situ measurement of wave front curvature during wave development. The gauge's low profile ({approx}250 {micro}m) and high resolution measurements (up to 0.5 nanoseconds) make it minimally intrusive and highly responsive, with a typically wave position accuracy of {+-}1 mm. Gauge construction and data analysis methods are described and waveforms are presented for Detasheet and N-9 explosives.

47 OTHER INSTRUMENTATION↗