Search NASA⌕ Search

Engineering topics

Dullea, Kevin J.

Publications and source records attributed to Dullea, Kevin J..

Actuated flywheel projectile launcher

Various embodiments include an actuated projectile launcher, including: a base structure; a projectile support, and a holding area from which a projectile launches; propulsion wheels selectively driven to rotate; and support arms, each supporting at a first end thereof a separate one of the propulsion wheels and being supported at an opposed second end thereof by the base structure. The support arms are configured to move the propulsion wheels between an expanded position and a contracted position, in which the propulsion wheels are closer to one another in the contracted position as compared to the expanded position. The movement of the propulsion wheels toward the contracted position brings the propulsion wheels into engagement with the projectile and drives the projectile from the holding area.

Dullea, Kevin J.↗

Bench testing of an early prototype pitch resonator WEC

This report describes a series of tests performed on a "pitch resonator'" concept for a wave energy converter. The overall testing campaign goals centered on risk reduction for the pitch resonator wave energy converter concept and model validation. Two modes of testing are captured in this report: one using a single degree of freedom test rig and one in which a six degree of freedom Stewart platform was employed.

16 TIDAL AND WAVE POWER↗

FOSWEC dynamics and controls test report

This report describes the testing of a model scale wave energy converter. This device, which uses two aps that pivot about a central platform when excited by waves, has a natural frequency within the range of the waves by which it is excited. The primary goal of this test was to assess the degree to which previously developed modeling, experimentation, and control design methods could be applied to a broad range of wave energy converter designs. Testing was conducted to identify a dynamic model for the impedance and excitation behavior of the device. Using these models, a series of closed loop tests were conducted using a causal impedance matching controller. This report provides a brief description of the results, as well as a summary of the device and ex- perimental design. The results show that the methods applied to this experimental device perform well and should be broadly applicable.

16 TIDAL AND WAVE POWER↗

Energy efficient robot

A locomotion subassembly for a biped robot is disclosed. The locomotion subassembly includes several unique energy transfer mechanisms and arrangements for efficiently powering the motion of the robot.

Buerger, Stephen↗