Search NASA⌕ Search

Engineering topics

Edmonds, L.

Publications and source records attributed to Edmonds, L..

Observations on the Presumed LET Dependence of SEGR

Single-event gate rupture (SEGR)in vertical power MOSFETs is induced by charge deposited in the epitaxial region (below the gate oxide) in concert with the weakening of the oxide, both are a result of the ion passage.

Single-event gate rupture SEGR vertical power MOSF↗

A theoretical analysis of steady-state photocurrents in simple silicon diodes

A theoretical analysis solves for the steady-state photocurrents produced by a given photo-generation rate function with negligible recombination in simple silicon diodes, consisting of a uniformly doped quasi-neutral region (called 'substrate' below) adjacent to a p-n junction depletion region (DR). Special attention is given to conditions that produce 'funneling' (a term used by the single-eventeffects community) under steady-state conditions. Funneling occurs when carriers are generated so fast that the DR becomes flooded and partially or completely collapses. Some or nearly all of the applied voltage, plus built-in potential normally across the DR, is now across the substrate. This substrate voltage drop affects substrate currents. The steady-state problem can provide some qualitative insights into the more difficult transient problem. First, it was found that funneling can be induced from a distance, i.e., from carriers generated at locations outside of the DR. Secondly, it was found that the substrate can divide into two subregions, with one controlling substrate resistance and the other characterized by ambipolar diffusion. Finally, funneling was found to be more difficult to induce in the p(sup +)/n diode than in the n(sup +)/p diode. The carrier density exceeding the doping density in the substrate and at the DR boundary is not a sufficient condition to collapse a DR.

Edmonds, L.↗

Approximations useful for the prediction of electrostatic discharges for simple electrode geometries

The report provides approximations for estimating the capacitance and the ratio of electric field strength to potential for a certain class of electrode geometries. The geometry consists of an electrode near a grounded plane, with the electrode being a surface of revolution about the perpendicular to the plane. Some examples which show the accuracy of the capacitance estimate and the accuracy of the estimate of electric field over potential can be found in the appendix. When it is possible to estimate the potential of the electrode, knowing the ratio of electric field to potential will help to determine if an electrostatic discharge is likely to occur. Knowing the capacitance will help to determine the strength of the discharge (the energy released by it) if it does occur. A brief discussion of discharge mechanisms is given. The medium between the electrode and the grounded plane may be a neutral gas, a vacuum, or an unchanged homogeneous isotropic dielectric.

Edmonds, L.↗

Predicting the Cosmic-Ray Environment Near Earth

Package of computer programs developed to predict cosmic-ray environment for spacecraft in orbit near Earth. Single cosmic-ray particle deposits enough electrical charge on sensitive area of individual circuit to change bit state. Single-event upsets may not cause permanent damage but upset functioning devices. Used to predict upset rate for space mission. Also calculates time-average cosmic-ray environment for multiple circular orbits, fragments of trajectories, and isolated points. Package written in HPL for interactive execution and implemented on HP 9825B desktop computer.

Edmonds, L.↗

Electrostatic shielding of a charged conducting sphere by a fine-mesh grounded screen

A simple model of an electrostatic-shielding arrangement that will reduce the electric field from the Near Infrared Mapper Spectrometer aboard the Galileo spacecraft is presented. The system considered consists of a charged conducting sphere held at a fixed absolute potential via a power source. This system is screened by a larger, concentric sphere made of fine mesh which is grounded. A derivation based on elementary principles of electrostatics is used to show that the shielding effectiveness of the screen can be expressed in terms of the separation between the two spheres and another quantity B that is an intrinsic property of the screen. For a given screen, B can be determined by measuring the capacitance per unit area and separation between a flat piece of the screen and a parallel metal plate.

Edmonds, L.↗

Cosmic ray environment model for Earth orbit

A set of computer codes, which include the effects of the Earth's magnetic field, used to predict the cosmic ray environment (atomic numbers 1 through 28) for a spacecraft in a near-Earth orbit is described. A simple transport analysis is used to approximate the environment at the center of a spherical shield of arbitrary thickness. The final output is in a form (a Heinrich Curve) which has immediate applications for single event upset rate predictions. The codes will culate the time average environment for an arbitrary number (fractional or whole) of circular orbits. The computer codes were run for some selected orbits and the results, which can be useful for quick estimates of single event upset rates, are given. The codes were listed in the language HPL, which is appropriate or a Hewlett Packard 9825B desk top computer. Extensive documentation of the codes is available from COSMIC, except where explanations have been deferred to references where extensive documentation can be found. Some qualitative aspects of the effects of mass and magnetic shielding are also discussed.

Edmonds, L.↗