Search NASA⌕ Search

Engineering topics

Elmer, John W.

Publications and source records attributed to Elmer, John W..

At least 19 records

CTE-tuned pyrolytic graphite (PG) substrate to minimize joining stress between laser diode and the substrate

A pyrolytic graphite (PG) substrate and laser diode package includes a substrate body having a PG crystalline structure with a basal plane oriented at a pre-determined orientation angle as measured from a longitudinal axis of a heat generating material, such as a laser diode, mounted on a surface of the PG substrate, so that a coefficient of thermal expansion (CTE) of the PG substrate is substantially matched with a CTE of the material.

Patra, Susant↗

Astigmatic electron beam propagation

An astigmatic electron beam with an ellipticity ratio of approximately 2:1 was examined using the Enhanced Modified Faraday Cup (EMFC) diagnostic to measure its properties and show how the power density distribution varies near the beam waist. Results show that the beam has two power density peaks, one on either side of the beam crossover point, resulting from different focal distances of the major and minor axes of the elliptical beam shape. Quantification of the beam properties was used to establish a depth-of-field where the beam diameter and peak power densities are relatively constant. For the 1 kW beam studied here, the depth-of-field measured approximately ±5 mm from the beam crossover point, illustrating how electron beam diagnostics can be used to identify process control limits for repeatable and reliable welds under non-ideal electron beam power density distribution conditions.

36 MATERIALS SCIENCE↗

Power Density Distributions in Electron Beams

Measuring and controlling the power density distribution of electron beams used for welding is critical for producing repeatable welds and for transferring welding parameters between different machines. On any given machine, the power density distribution is controlled by defocusing the beam relative to its sharpest focused condition. However, measuring the power density distribution can be difficult due to the intense nature of welding beams and is further complicated by imperfect electron optics that can distort the beam, making it difficult to quantify. The enhanced modified Faraday cup (EMFC) diagnostic method was used here for beam analysis that utilizes computed tomography to reconstruct the beam’s power density distribution. These results were compared to the International Standards Organization (ISO) method for characterizing laser beams using a second-moment D4σ calculation. For ideal Gaussian-shaped beams, both methods would give the same result. However, for imperfect beams, the calculated D4σ diameter was shown to be about 25% larger relative to the FWe2 diameter measured by the EMFC due to the heavier weighting of data in the tails of the beam by D4σ. Finally, although both methods produce repeatable welds, it is important to understand the differences in the reported beam diameters, divergence angles, and beam parameter products when transferring parameters between machines.

36 MATERIALS SCIENCE↗

Si-based CTE-matched substrate for laser diode packaging

A Cu—Si—Cu substrate having a silicon substrate, copper plating on opposite sides of the silicon substrate, and copper vias extending thru the silicon substrate to electrically and thermally connect the copper platings together. The thicknesses of the silicon substrate and the copper platings are selected so that a coefficient of thermal expansion (CTE) of the Cu—Si—Cu substrate is substantially the same as a CTE of a material to be mounted on the Cu—Si—Cu substrate.

Patra, Susant↗

Vacuum manufacture of cryogenic pressure vessels for hydrogen storage

In one aspect the present disclosure relates to a method of manufacturing a cryogenic pressure vessel. The method may include providing a metal lined, composite wrapped vessel which has a boss. The method may further include securing an inlet to the boss, and then encapsulating the metal lined, composite wrapped vessel within a metallic layer in a vacuum controlled environment to form an encapsulated inner tank subassembly. The method may further include securing at least one support to an exterior of the encapsulated inner tank subassembly, and within the controlled vacuum environment, applying a metal coating over the encapsulated inner tank subassembly and the at least one support to form a metal coated, encapsulated inner tank subassembly. The method may further include, within the controlled vacuum environment, encapsulating the metal coated, encapsulated inner tank subassembly within a metallic vacuum jacket, which forms the cryogenic pressure vessel.

Aceves, Salvador M.↗

CTE-tuned pyrolytic graphite (PG) substrate to minimize joining stress between laser diode and the substrate

A pyrolytic graphite (PG) substrate and laser diode package includes a substrate body having a PG crystalline structure with a basal plane oriented at a pre-determined orientation angle as measured from a longitudinal axis of a heat generating material, such as a laser diode, mounted on a surface of the PG substrate, so that a coefficient of thermal expansion (CTE) of the PG substrate is substantially matched with a CTE of the material.

Patra, Susant K.↗

Mechanical rolling and annealing of wire-arc additively manufactured stainless steel plates

Thin walls of 304L stainless steel were fabricated by wire-arc additive manufacturing (WAAM) followed by post build thermomechanical processing to modify the as built microstructure and properties. The walls were made using a high-deposition-rate robotically controlled gas-metal arc welding system and were characterized using optical microscopy and tensile tested for mechanical properties. Post processing consisted of mechanical rolling the walls to 25% and 40% strains, followed by annealing at 1050°C to demonstrate a wide range of properties. Results show that WAAM can be used to build custom sized semi-finished parts or blanks that can later be thermomechanically processed to increase strength and ductility through recrystallization of the as built microstructure, and/or processed into desired shapes with improved mechanical properties.

304L stainless steel↗

Some Physics Fundamentals of High Energy Density Welding

The purpose of this section of this document is to provide a brief summary of the physics aspects of high energy density welding (HEDW). One reason for this is to help elucidate some of the differences between EBW and LBW. A fundamental understanding of these differences can help guide an appropriate choice of process for a particular application.

42 ENGINEERING↗

Angled slit design for computed tomographic imaging of electron beams

Computed tomographic method and apparatus includes an electron or ion beam having a beam axis, a refractory metal disk; at least one slit in the refractory metal disk that receive the beam, wherein the slit is at an angle to the beam axis; a beam entrance opening in the slit that allows the beam to enter; an effective beam exit opening in the slit that allow the beam to exit, wherein the beam effective exit opening is smaller than the beam entrance opening; and a system for moving the beam across the refractory metal disk, wherein the beam enters the slit through the beam entrance opening and exits the slit through the effective beam exit opening; and a computed tomographic device for measuring the beam that enters and exits the slit for analyzing the beam.

Elmer, John W.↗

Concentric semi-circular split profiling for computed tomographic imaging of electronic beams

Apparatus and method for analyzing an electron beam including a circular sensor disk adapted to receive the electron beam, an inner semi-circular slit in the circular sensor disk; an outer semi-circular slit in the circular sensor disk wherein the outer semi-circular slit is spaced from the first semi-circular slit by a fixed distance; a system for sweeping the electron beam radially outward from the central axis to the inner semi-circular slit and outer second semi-circular slit; a sensor structure operatively connected to the circular sensor disk wherein the sensor structure receives the electron beam when it passes over the inner semi-circular slit and the outer semi-circular slit; and a device for measuring the electron beam that is intercepted by the inner semi-circular slit and the outer semi-circular slit.

42 ENGINEERING↗

Wire-Based Additive Manufacturing of Stainless Steel Components

In this work three different wire-fed additive manufacturing (AM) processes were employed to evaluate differences between laser, arc, and electron beam heat sources used for high-deposition-rate AM on the order of 1 kg/h. Optimum weld and build parameters were developed independently to match the characteristics of each heat source using 308L stainless steel welding wire as the feedstock. Laser-wire AM was made with the lowest energy per unit length of weld and had the best control of the melt pool and surface finish. Wire arc-based AM had an intermediate energy per unit length of weld of approximately 5× that of the laser process, while electron beam wire AM had the highest energy per unit length of weld at approximately 10× that of the laser process. Analysis of the parts that were built included evaluation of mechanical properties and microstructures, and these properties are discussed with respect to the difference in input energy and cooling rates. Results show that all three processes build parts with properties that exceed those of annealed 304L wrought stainless steel. However, significant differences exist between the processes, and the results presented here can be used to help select the best wire-fed process for a given high-deposition-rate application.

36 MATERIALS SCIENCE↗

The effect of atmosphere on the composition of wire arc additive manufactured metal components

The effects of atmospheric contamination on wire arc additively manufactured (WAAM) components were studied by producing AM multilayer parts under controlled conditions. Gas impurity levels were maintained using an argon purge box at levels from atmospheric (210,000 ppm O 2 ) to 1 ppm O 2 , and with corresponding levels of nitrogen. Stainless steel (308L), titanium (Ti–6Al–4V) and pure Ta were studied, each having different affinities for oxygen and nitrogen. Results show that WAAM parts made in air produce unacceptable oxygen and/or nitrogen levels for most applications. However, with moderate purging, all three metals can be deposited by WAAM with compositions similar to the starting wire, and the results are used to provide recommended minimum purge box atmospheres for each metal.

36 MATERIALS SCIENCE↗

Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments

Titanium alloy Ti5553 (Ti-5Al-5Mo-5V-3Cr) is an excellent candidate for structural applications and additive manufacturing processes, since, unlike Ti6Al4 V, when built via selective laser melting and/or post additive manufactured welding, it maintains a near-beta microstructure that is both ductile and high strength. Another feature is that Ti5553 properties are adaptable through post build heat treatment. This study explores the heat treatability of selective laser melted Ti5553 up to temperatures approaching the β-transus. Here the results show strength increases while maintaining ductility at high temperatures (700–800°C), but embrittlement occurs at intermediate temperatures (400–600°C) likely due to changes in volume fraction and morphology of the α-phase and/or the presence of the ω-phase. Microstructure and X-ray diffraction are reported after heat-treating to better understand this mechanical response.

42 ENGINEERING↗

Wire Arc Additive Manufacturing Final Report for the Wire-Based AM Focused Exchange

This feasibility study demonstrates the ability to additively manufacture 3D parts from reactive metal alloys using robotically controlled wire arc additive manufacturing (WAAM). Experiments consisted of developing WAAM welding parameters and performing robotic welding inside a controlled atmosphere purge box that was specifically built for this project. Purge atmospheres with varying levels of oxygen were created to determine minimum purge requirements for WAAM builds in order to build components without significant uptake of oxygen or nitrogen. Weld parameters were successfully developed for a titanium alloy (Ti-6-4) and tantalum, both being very sensitive to atmospheric contamination during welding. WAAM builds were made from Ti-6-4, Ta, and also 308L stainless steel to relate back to previous results for 308L WAAM studies performed in air. Oxygen purge levels varied from 1000 ppm to 1 ppm, and were further compared to builds made at atmospheric levels of O 2 (21%). Results showed significant uptake of oxygen and nitrogen for all three metals for WAAM parts built outside the inert atmosphere box, where only shielding gas from the welding torch was used as protection. However, considerable reduction of oxygen and nitrogen uptake, in all three metals, was observed even for moderate purge levels of 1000 ppm O 2 in the box. Additional purging reduced oxygen and nitrogen uptake further and was shown to be metal dependent where Ta and Ti-6-4 were more sensitive to nitrogen uptake than oxygen uptake. Guidelines for the measured O 2 content of WAAM purge atmospheres were created as follows: 900 ppm for 308L SS, 130 ppm for Ti-6-4, and 40 ppm for Ta. These purge levels produced nitrogen and oxygen contents of the build similar to the wire composition and within the allowable specifications for these metals.

36 MATERIALS SCIENCE↗

High flux diode packaging using passive microscale liquid-vapor phase change

A laser diode package includes a heat pipe having a fluid chamber enclosed in part by a heat exchange wall for containing a fluid. Wicking channels in the fluid chamber is adapted to wick a liquid phase of the fluid from a condensing section of the heat pipe to an evaporating section of the heat exchanger, and a laser diode is connected to the heat exchange wall at the evaporating section of the heat exchanger so that heat produced by the laser diode is removed isothermally from the evaporating section to the condensing section by a liquid-to-vapor phase change of the fluid.

36 MATERIALS SCIENCE↗

The influence of impurities on the crystal structure and mechanical properties of additive manufactured U–14at.% Nb

Uranium-niobium alloys can exist with significantly different microstructures and mechanical properties, heavily influenced by thermomechanical processing history and impurities. In this study, the influence of Ti and other impurities is studied on uranium-14 at.% niobium additively manufactured using laser powder bed fusion. In two different metallic impurity levels were investigated and a Nb equivalent (Nbeq) composition is defined to represent the impurities. Furthermore, in-situ neutron diffraction during compression loading shows that increased Nbeq promotes the formation of γ°-tetragonal phase at the expense of α''-monoclinic phase, resulting in 2 × higher yield strength than water quenched α'' and a strain induced transformation to α'' with superelastic strains to 4.5%.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds

Welds can either be stronger or weaker than the base metals that they join depending on the microstructures that form in the fusion and heat-affected zones of the weld. In this paper, weld strengthening in the fusion zone of annealed 21-6-9 stainless steel is investigated using cross-weld tensile samples, hardness testing, and microstructural characterization. Due to the stronger nature of the weld, the cross-weld tensile tests failed in the base metal and were not able to generate true fusion zone mechanical properties. Nanoindentation with a spherical indenter was instead used to predict the tensile behavior for the weld metal. Extrapolation of the nanoindentation results to higher strains was performed using the Steinberg–Guinan and Johnson–Cook strength models, and the results can be used for weld strength modeling purposes. The results illustrate how microstructural refinement and residual ferrite formation in the weld fusion zone can be an effective strengthener for 21-6-9 stainless steel.

36 MATERIALS SCIENCE↗