Search NASA⌕ Search

Engineering topics

Entekhabi, Dara

Publications and source records attributed to Entekhabi, Dara.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

A Disaggregation Algorithm for the High Resolution Soil Moisture Product from the Upcoming NISAR Mission

The NASA-ISRO Synthetic Aperture Radar (NISAR) is in the developmental stage and is planned to launch in Jan 2024 with two different microwave frequency bands L-band (~1.25 GHz) and S-band (~3.20 GHz), respectively, to provide fine-scale observations at resolutions of 5 to 10 meters. NISAR mission will provide a very high-resolution (200m) soil moisture product globally with a temporal resolution of 6 days, using L-band SAR observations. A data-driven approach is developed for disaggregating the coarse resolution (9 km) soil moisture data to a very high-resolution (200 m) soil moisture product using fine-scale (~ 10 m) NISAR L-band observations. In this study, we used ALOS PALSAR-2 L-band SAR observations in place of expected NISAR L-band observations. The developed disaggregation approach was tested on two different locations of India and USA and showed that the proposed approach has a great potential to estimate soil moisture at a very high resolution of 200m with very low uncertainties (0.02 m3/m3 – 0.04 m3/m3).

Vanama, Venkat↗
NASA NTRS2022

Development of SMAP Retrievals for Forested Regions: SMAPVEX19-22 and SMAPVEX22-Boreal

The retrieval of soil moisture (SM) under forest canopy has long been an important goal for low frequency remote sensing. The NASA Soil Moisture Active Passive (SMAP) mission is engaged at three separate experiment sites to improve its SM retrieval algorithm in forested areas. Two of the sites are located in the deciduous forest region in Massachusetts and New York, US and one is located in southern boreal forest zone in Saskatchewan, Canada. Each site has a SM measurement network of about 20 stations spread out over an area of about 30 km, which covers the SMAP radiometer footprint. In 2022, intensive observations will be carried out at each site which involve deployments of an airborne instrument, which is similar to the SMAP instrument, and intensive manual measurements of SM, surface and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. Here we show some early results using the networks and SMAP measurements to analyze the sensitivity of the SMAP L-band measurements to SM changes in forested area and the impact of the vegetation to the signal. The results suggest an upper limit for vegetation attenuation accounting for surface roughness effect and relate that to the values used in the current SMAP SM products.

Yueh, Simon H.↗
NASA NTRS2021

SMAP Validation Experiment 2019-2021 (SMAPVEX19-21): Detection of Soil Moisture Under Temperate Forest Canopy

The retrieval of soil moisture under forest canopy has long been an important goal for low frequency remote sensing. The NASA mission started a dedicated field experiment in May 2019 by deploying two temporary soil moisture networks in northeast US that cover two separate SMAP pixels with variable degree of forest cover. The measurements will be augmented with two intensive observation periods (IOP). The first IOP is planned for July and the other one for October. The IOPs will see deployment of the airborne PALS (Passive Active L-band sensor) instrument, which is similar to the SMAP instrument, and intensive manual measurements of soil moisture and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. The early results have shown that the SMAP measurement signal at L-band is sensitive to soil moisture changes observed on the ground.

Yueh, Simon H.↗
NASA NTRS2019

Simultaenous Retrieval of Surface Roughness Parameters from Combined Active-Passive SMAP Observations

Soil roughness strongly influences processes like erosion, infiltration, moisture and evaporation of soils as well as growth of agricultural plants. An approach to soil roughness based on active-passive microwave covariation is proposed in order to simultaneously retrieve the vertical RMS height (s) and horizontal correlation length (l) of soil surfaces from simultaneously measured radar and radiometer microwave signatures. The approach is based on a retrieval algorithm for active-passive covariation including the improved Integral Equation Method (I2EM). The algorithm is tested with the global active-passive microwave observations of the SMAP mission. The developed roughness retrieval algorithm shows independence of permittivity for > 10 [-] due to the covariation formalism. Results reveal that s and l can be estimated simultaneously by the proposed approach since surface patterns of non-vegetated areas become evident on global scale. In regions with sandy deserts, like the Sahara or the outback in Australia, determined and confirm rather smooth to semi-rough surface roughness patterns with small vertical RMS heights and corresponding higher horizontal correlation lengths.

correlation length↗
NASA NTRS2019

SMAP Mission Status and Plan

The prime mission phase of National Aeronautics Space Administration's (NASA's) Soil Moisture Active Passive (SMAP) project was successfully completed in June 2018. The extended phase has been approved by NASA for operation through 2021 (with option to 2023). SMAP data have been well calibrated and have enabled diverse scientific investigations in water, energy and carbon cycle research, terrestrial ecology and ocean science. This paper will provide the highlights of algorithm updates to radiometric calibration and soil moisture retrieval algorithms. A summary of extended phase activities, in particular the SMAPVEX19 campaign, for product enhancements will be provided.

Water Cycle↗
NASA NTRS2019

The SMAP and Copernicus Sentinel 1A/B Microwave Active-Passive High Resolution Surface Soil Moisture Product and Its Applications

SMAP project released a new enhanced high-resolution (3km and 1 km) soil moisture active-passive product. This product is obtained by combining the SMAP radiometer data and the Sentinel-1A and -1B Synthetic Aperture Radar (SAR) data. The approach used for this product draws heavily from the heritage SMAP active-passive algorithm. Modifications in the SMAP active-passive algorithm are done to accommodate the Copernicus Program's Sentinel-1A and -1B multi-angular C-band SAR data. Assessment of the SMAP and Sentinel active-passive algorithm has been conducted and results show feasibility of estimating surface soil moisture at high-resolution in regions with low vegetation density (~< 3 kg/sq.m). A new version of this product is released to public in May 2018. This high resolution (3 km and 1 km) soil moisture product with reasonable accuracy of 0.05 m3/m3 is useful for agriculture, flood mapping, watershed/rangeland management, and ecological/hydrological applications.

microwave remote sensing↗
NASA NTRS2018

Physics-Based Retrieval of Surface Roughness Parameters for Bare Soils from Combined Active-Passive Microwave Signatures

In the past the effect of soil roughness was often considered secondary within the determination of soil moisture from remote sensing data. Several studies showed that accurate determination of soil roughness leads to an improved estimation of soil moisture. Two default parameters to describe the surface roughness are the standard deviation of the surface height variation 𝑠 and the surface correlation length 𝑙 with its corresponding autocorrelation function. Both parameters (𝑠,𝑙) affect the emissivity measured by radiometers as well as the backscattering observed by radars. In this study, we develop a physics-based approach to retrieve 𝑠 and 𝑙 by combining both microwave signals based on active-passive microwave covariation. To test the approach, containing a forward model and a retrieval algorithm, we used active/passive microwave data measured with the ComRAD truck-based SMAP simulator at L-band. Results and validations with corresponding field measurements on ground show that 𝑠 and 𝑙 can be estimated simultaneously when using this approach. The physics-based retrieval algorithm works robustly for two investigated test fields having an RMS-Error of 0.68 cm and 0.69 cm between the microwave-based and field-measured 𝑠-values, and of 3.13 cm and 3.04 cm for 𝑙-values. The first validation of the results reveals that the influence of the autocorrelation function, needed within the retrieval, is distinct.

correlation length↗
NASA NTRS2018

Improving Brightness Temperature Measurements Near Coastal Areas

The Soil Moisture Active Passive (SMAP) mission was designed to acquire and combine L-band radar and radiometer measurements for the estimation of soil moisture with 4% volumetric accuracy away from coastal zones. In regions near the coast or near inland bodies of water, the SMAP footprint contains land and water, resulting in errors in the soil moisture estimation. In this paper, we address the effort to extract the brightness temperature related to the land fraction or water fraction (depending on the center of the footprint location) from the affected SMAP measurements. We evaluate the performance of our algorithm over simulated data. We then show results over real data. The new SMAP upgraded product is expected to be delivered on April 2018.

Entekhabi, Dara↗
NASA NTRS2018

The SMAP Mission Combined Active-Passive Soil Moisture Product at 9 Km and 3 Km Spatial Resolutions

The NASA Soil Moisture Active Passive (SMAP) mission was launched on January 31st, 2015. The spacecraft was to provide high-resolution (3 km and 9 km) global soil moisture estimates at regular intervals by combining for the first time L-band radiometer and radar observations. On July 7th, 2015, a component of the SMAP radar failed and the radar ceased operation. However, before this occurred the mission was able to collect and process ~2.5 months of the SMAP high-resolution active-passive soil moisture data (L2SMAP) that coincided with the Northern Hemisphere's vegetation green-up and crop growth season. In this study, we evaluate the SMAP high-resolution soil moisture product derived from several alternative algorithms against in situ data from core calibration and validation sites (CVS), and sparse networks. The baseline algorithm had the best comparison statistics against the CVS and sparse networks. The overall unbiased root-mean-square-difference is close to the 0.04 cu. m/cu. m the SMAP mission requirement. A 3 km spatial resolution soil moisture product was also examined. This product had an unbiased root-mean-square-difference of ~0.053 cu. m/cu. m. The SMAP L2SMAP product for ~2.5 months is now validated for use in geophysical applications and research and available to the public through the NASA Distributed Active Archive Center (DAAC) at the National Snow and Ice Data Center (NSIDC). The L2SMAP product is packaged with the geo-coordinates, acquisition times, and all requisite ancillary information. Although limited in duration, SMAP has clearly demonstrated the potential of using a combined L-band radar-radiometer for proving high spatial resolution and accurate global soil moisture.

high resolution soil moisture↗
NASA NTRS2017

NASA Soil Moisture Active Passive Mission Status and Science Highlights

The Soil Moisture Active Passive (SMAP) observatory was launched January 31, 2015, and its L-band radiometer and radar instruments became operational during April 2015. This paper provides a summary of the quality assessment of its baseline soil moisture and freeze/thaw products as well as an overview of new products. The first new product explores the Backus Gilbert optimum interpolation based on the oversampling characteristics of the SMAP radiometer. The second one investigates the disaggregation of the SMAP radiometer data using the European Space Agency's Sentinel-1 C-band synthetic aperture radar (SAR) data to obtain soil moisture products at about 1 to 3 km resolution. In addition, SMAPs L-band data have been found useful for many scientific applications, including depictions of water cycles, vegetation opacity, ocean surface salinity and hurricane ocean surface wind mapping. Highlights of these new applications will be provided.The SMAP soil moisture, freeze/taw state and SSSprovide a synergistic view of water cycle. For example, Fig.7 illustrates the transition of freeze/thaw state, change of soilmoisture near the pole and SSS in the Arctic Ocean fromApril to October in 2015 and 2016. In April, most parts ofAlaska, Canada, and Siberia remained frozen. Melt onsetstarted in May. Alaska, Canada, and a big part of Siberia havebecome thawed at the end of May; some freshwater dischargecould be found near the mouth of Mackenzie in 2016, but notin 2015. The soil moisture appeared to be higher in the Oband Yenisei river basins in Siberia in 2015. As a result,freshwater discharge was more widespread in the Kara Seanear the mouths of both rivers in June 2015 than in 2016. TheNorth America and Siberia have become completely thawedin July. After June, the freshwater discharge from other riversinto the Arctic, indicated by blue, also became visible. Thefreeze-up started in September and the high latitude regionsin North America and Eurasia became frozen. Comparing thespread of freshwater in August 2015 and 2016 suggests thatthere was more discharge from Ob and Yenisei in 2015,which appeared to correspond to a higher soil moisturecontent in the Ob and Yenisei basins. In contrast, Mackenzieappeared to have more discharge in September 2016.

soil moisture↗
NASA NTRS2016

Towards Validation of SMAP: SMAPEX-4 & -5

The L-band (1 - 2 GHz) microwave remote sensing has been widely acknowledged as the most promising method to monitor regional to global soil moisture. Consequently, the Soil Moisture Active Passive (SMAP) satellite applied this technique to provide global soil moisture every 2 to 3 days. To verify the performance of SMAP, the fourth and fifth campaign of SMAP Experiments (SMAPEx-4 -5) were carried out at the beginning of the SMAP operational phase in the Murrumbidgee River catchment, southeast Australia. The airborne radar and radiometer observations together with ground sampling on soil moisture, vegetation water content, and surface roughness were collected in coincidence with SMAP overpasses. The SMAPEx-4 and -5 data sets will benefit to SMAP post-launch calibration andvalidation under Australian land surface conditions.

Ye, Nan↗
NASA NTRS2016

NASA Soil Moisture Active Passive Mission Status and Science Performance

The Soil Moisture Active Passive (SMAP) observatory was launched January 31, 2015, and its L-band radiometer and radar instruments became operational since mid-April 2015. The SMAP radiometer has been operating flawlessly, but the radar transmitter ceased operation on July 7. This paper provides a status summary of the calibration and validation of the SMAP instruments and the quality assessment of its soil moisture and freeze/thaw products. Since the loss of the radar in July, the SMAP project has been conducting two parallel activities to enhance the resolution of soil moisture products. One of them explores the Backus Gilbert optimum interpolation and de-convolution techniques based on the oversampling characteristics of the SMAP radiometer. The other investigates the disaggregation of the SMAP radiometer data using the European Space Agency's Sentinel-1 C-band synthetic radar data to obtain soil moisture products at about 1 to 3 kilometers resolution. In addition, SMAP's L-band data have found many new applications, including vegetation opacity, ocean surface salinity and hurricane ocean surface wind mapping. Highlights of these new applications will be provided.

hydroclimatology↗