Engineering topics

Flanagan, M. J., Jr.

Publications and source records attributed to Flanagan, M. J., Jr..

3 records

NASA NTRS1993

Aerodynamic heating in the vicinity of hypersonic, axisymmetric, shock-wave boundary-layer interactions

Aerodynamic heating rates are calculated from time-dependent temperature measurements in the vicinity of shock-wave boundary-layer interactions due to conical compression ramps on an axisymmetric body. The data were acquired at the Ohio State University Aeronautical and Astronautical Research Laboratory and at the Air Force Flight Dynamics Laboratory at Mach numbers of 6 and 10. The model is a cylindrical body with a 10 deg conical nose. Conical ramps with half-angles of 10, 20, 25, 30, and 35 deg serve as shock-wave generators. Flowfield surveys are made in the vicinity of the ramp vertices, separation points, and reattachment points. Experimental results quantify temperature response and the resulting heat transfer rates as a function of ramp angle, Reynolds number and freestream Mach number. The temperature responses within the flowfield appear to be steady-state for all angles and all Reynolds numbers, and hence, the heat transfer rates appear to be steady-state.

Flanagan, M. J., Jr.↗

NASA NTRS1992

Operation and design considerations for unsteady data acquisition with PC-based systems in high Reynolds number hypersonic flowfields

Operation and design considerations for personal-computer-based data acquisition are analyzed, and a system is created that is portable, inexpensive, and capable of high-frequency response. This system performed well when given an extensive analysis of the characteristics of the radio-frequency noise in the test environment. The system architecture is well-suited for support of high-frequency data acquisition from both pressure transducers and high-frequency-response thermocouple gauges. As configured, the system provides a data resolution of approximately 0.09 psia and 0.56 F. Considering the constraints placed upon this design, this data resolution is acceptable. The $5000 budget did require use of an existing PC and rental of signal-conditioning equipment.

Flanagan, M. J., Jr.↗

NASA NTRS1991

Pressure and temperature fluctuations in an axisymmetric flowfield due to shock-boundary layer interactions at high Reynolds numbers at Mach 6

Pressure and temperature fluctuations have been meausred in the vicinity of shock wave-boundary layer interactions due to conical compression ramps on an axisymmetric body. The basic model is a cylindrical body with a 10-deg conical nose. Four conical ramps of vertex angles, 20, 25, 30, and 35 deg serve as shock wave generators. Surface temperature and pressure surveys have been made in the vicinity of the conical ramp vertex, the separation point, and the reattachment point. The temperature response within the flowfield appears to be steady-state for all compression ramp angles and all Reynolds numbers. The pressure response shows some oscillations in the vicinity of the separation point. The characteristic frequency of these fluctuations appears to be in the range from 200 to 1200 Hz with most of the power near 400 Hz. These data indicate the flowfield to be steady-state for all locations with the exception of localized pressure fluctuations in the vicinity of the separation point.

Flanagan, M. J., Jr.↗