Engineering topics

France, Ryan M. (ORCID:0000000220404809)

Publications and source records attributed to France, Ryan M. (ORCID:0000000220404809).

17 records

DOE OSTI2025

Metamorphic Epitaxy Solutions for Thermophotovoltaic and Laser Power Conversion Applications

Metamorphic GaInAs enables photovoltaic devices optimized for a wide range of bandgaps between 0.35 and 1.41 eV. We have developed compositionally graded buffers made of GaInP and AlGaInAs to enable growth of these devices on GaAs substrates with low dislocation densities and high performance. We present results for devices grown on both graded buffer materials with device bandgaps in the range 0.58-1.41 eV and compare the benefits and drawbacks of each material system. These results enable high performance for applications such as thermophotovoltaics and optical power transmission using high power lasers.

III-V↗

DOE OSTI2024

1.1 eV GaInAs Cell Development for Dual-Use Solar and 1075 nm Laser Power Converters

Dual-use power converter cells can receive solar and laser power simultaneously to generate current, an application relevant to space and terrestrial industries. This study investigates two concepts of solar cells optimized for dual- use 1070 nm laser and solar power conversion, a single-junction and triple-junction cell. Because it is bandgap-tuned for a 1070 nm laser, the 1.1 eV junction is incorporated into each of the two designs, making its development key to the success of both concepts. Efficiency data for a one junction GaInAs cell demonstrates a laser conversion efficiency of 38% at 1070nm wavelength without an anti-reflection coating. However, the single-junction device requires optimization to reduce short wavelength absorption of the broad solar spectrum. In both devices, the graded buffer layers in the GaInAs cell affects the cell's performance by reducing threading dislocations in the active junction. However, the buffer in the three-junction device also acts as a lateral transport layer and so affects the fill factor depending on its sheet resistance. By varying the buffer thickness, we demonstrate a direct relationship between buffer thickness and sheet resistance reduction, while considering implications to open-circuit voltages. We also performed resistance modeling to determine the optimal grid spacing and thickness of the grid fingers to minimize losses due to sheet resistance and grid shading.

dual-use↗

DOE OSTI2024

InP- and GaAs-Based 0.6 eV GaInAs Devices for Thermophotovoltaics and Laser Power Conversion

Emerging applications such as thermal energy grid storage, waste heat recovery and portable power generation require efficient thermophotovoltaic (TPV) converters tuned to temperatures near 1000 Degrees Celsius or below. Metamorphic GaInAs with larger lattice constants than InP present a promising option for these needs. The ability to grow these devices on GaAs substrates instead of more expensive InP would enhance the scalability of these devices. In this talk, we present inverted metamorphic Ga0.3In0.7As photovoltaic converters with sub-0.60 eV bandgaps grown on InP and GaAs substrates. These devices are realized using InAsP or GaInP/InAsP compositionally graded buffers which exhibit threading dislocation densities of 1.3 +/- 0.6 x 106 cm-2 and 8.9 +/- 1.7 x 106 cm-2 on InP and GaAs, respectively. Despite this difference in defect density, the devices generate similar open-circuit voltages of 0.386 V and 0.383 V, respectively, under irradiance producing a short-circuit current density of -10 A/cm2, with bandgap-voltage offsets of 0.20 and 0.21 V. We estimate their thermophotovoltaic efficiency using these measurements coupled with broadband reflectance measurments. The InP-based cell is estimated to yield 1.09 W/cm2 at 1100 Degrees Celsius vs. 0.92 W/cm2 for the GaAs-based cell, with TPV efficiencies of 16.8 vs. 9.2%. Both devices are limited by sub-bandgap absorption, which we assess largely occurs in the graded buffers. We estimate that the 1100 Degrees Celsius thermophotovoltaic efficiencies would increase to 24.0% and 20.7% in structures with the graded buffer removed, if previously demonstrated reflectance is achieved. These devices also have application as laser power converters in the 2.0-2.3 um atmospheric window. We estimate efficiencies of 36.8% and 32.5% under 2.0 um monochromatic irradiance of 1.86 W/cm2 and 2.81 W/cm2, respectively.

ENGINEERING,MATERIALS SCIENCE,SOLAR ENERGY↗

DOE OSTI2023

Improving Performance of III-V Solar Cells Grown on Spalled Germanium with Ex Situ Substrate Planarization

Controlled spalling allows removal of devices and provides an opportunity for cost reduction through substrate reuse. However, the fracture-based process can leave behind morphological surface features, notably river lines, that can disrupt epitaxial growth and degrade device performance. We investigate the viability of various wet etch chemistries to planarize river lines to ensure high-quality device growth and performance without mechanical repolishing, and so maintain a route towards cost-effective reuse. Etching in a HF: HNO 3 :CH 3 COOH solution effectively planarizes river lines and produces a surface that yields devices with equivalent performance to those grown on epi-ready Ge wafer surfaces. Further studies will focus on optimizing etch composition, temperature, and time to minimize material removal while maintaining a suitable surface for high-quality epitaxy.

germanium↗

DOE OSTI2022

Record Efficiency Multijunction Solar Cells with Strain-Balanced Quantum Well Superlattices

The absorption edge of a GaAs solar cell can be tuned to longer wavelengths with strain-balanced quantum wells, as an alternative to metamorphic epitaxy. For one-sun photovoltaic applications, an optimum bandgap for both single and multijunction solar cells is near the broad water absorption peak at 930 nm and can be accessed by a Ga0.9In0.1As alloy. This alloy is strained with respect to the GaAs substrate, and so only very thin ~10 nm layers can be grown without relaxation via dislocation formation. However, solar cells require significant thickness for complete absorption of the incoming solar spectrum, requiring many such layers. We have designed quantum well superlattices with up to 300 sets of carefully tuned strain-balanced GaInAs/GaAsP pairs by limiting composition modulation and material degradation. We have incorporated quantum well solar cells into multijunction devices to achieve record 32.9% two-junction and 39.5% three-junction solar cells under standard one-sun illumination. We will describe the physics of the quantum well devices and the growth conditions that lead to sharp interfaces and good material quality, as well as the characterization of the efficiencies.

GaAs↗

DOE OSTI2021

Improvement of Front-Junction GaInP by Point-Defect Injection and Annealing: Preprint

Traditional front junction GaInP solar cells are radiation tolerant and can have good diffusion length, but have limited voltage and thus efficiency. Here, we investigate the impact of annealing on GaInP device performance. First, Zn-doped GaInP/AlGaInP double heterojunction structures are studied in order to investigate the impact of annealing in a simple structure. While standard anneals lower diffusion length and lifetime, annealing after injecting point-defects improves material quality, presumably by eliminating sources of non-radiative recombination. Atomic ordering is reduced by the anneal, which raises the device bandgap and requires consideration. These results can be used to improve front junction device performance while controlling the bandgap. Then, GaInP front-junction devices are created using anneals with and without point-defect injection. Voc and EQE trends follow the diffusion length and lifetime trends from the DH structures. Baseline devices have Woc of 0.484 V, raising to 0.504 V after a high temperature anneal. However, injecting point defects prior to the anneal results in a front junction device with Woc of 0.405 V and a diffusion length greater than 8 micrometers. Optimized front-junction GaInP devices with an ARC have ~20% efficiency without a rear reflector.

anneal↗

DOE OSTI2021

32.9% Efficient Tandem Solar Cell with Strain-Balanced GaInAs/GaAsP Quantum Wells: Preprint

We demonstrate single and dual junction solar cells with up to 80 strain-balanced GaInAs/GaAsP quantum wells (QWs), in order to extend the range of photon absorption. The net average stress in the quantum well layers is =12 MPa, despite coherent stresses in the individual layers that are 35-70 times greater. The GaAs-QW cell has a certified efficiency of (27.2 ± 0.2)% at one-sun; the GaInP/GaAs-QW tandem has a certified record one-sun efficiency of (32.9 ± 0.5)%. We will discuss the architecture of the devices, the physics behind the high performance, and pathways to further improvement.

GaAsP↗

DOE OSTI2021

Platform for Accurate Efficiency Quantification of > 35% Efficient Thermophotovoltaic Cells

Thermophotovoltaic (TPV) devices convert thermal radiation directly into electricity using semiconductor diodes and have a variety of uses from waste heat recovery to energy storage to primary power conversion. Recent results have demonstrated promising cells nearing and surpassing 30% conversion efficiency. As TPV cells continue to increase in efficiency, they become attractive for a wider range of applications. Their efficiencies must be quantified in a standardized fashion to compare results accurately across research groups. Here, we outline and quantify the most important characteristics of an accurate and precise TPV efficiency measurement. Using a custom-built measurement apparatus that takes these characteristics into account, we report 19 cells with greater than 30% conversion efficiency and 2 cells with greater than 35% conversion efficiency. This confirms that our reported cell efficiencies are not simply those of hero cells but rather of a distribution of cells that can be produced in a consistent, high-quality process.

III-V↗

DOE OSTI2021

Towards a III-V Solar Cell with a Metamorphic Graded Buffer Directly Grown on V-Groove Si Substrates

V-groove Si substrates offer a promising route for the direct growth of III-V solar cells on low-cost, photovoltaic-grade Si. In this work, we develop a method for coalescing GaP nucleated on V-groove substrates into thin films suitable for the growth of III-V solar cells. We demonstrate the ability to suppress nucleation-related defects by modifying the V-groove substrate to cover the (0 0 1)-oriented Si V-groove tops with SiN x . A threading dislocation density (TDD) of 5 × 10 7 cm -2 was measured with electron channeling contrast imaging. Continuing work will focus on further reducing the TDD and the growth of a GaAs solar cell on a GaP on V-groove Si template.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2021

32.9% Efficient Tandem Solar Cell with Strain-Balanced GaInAs/GaAsP Quantum Wells

III-V↗

DOE OSTI2021

Improvement of Front-Junction GaInP by Point-Defect Injection and Annealing

anneal↗

DOE OSTI2021

Graded Buffer Bragg Reflectors with High Reflectivity and Transparency for Metamorphic Optoelectronics

A graded buffer Bragg reflector (GBBR) is a bifunctional device component that provides the reflection of a distributed Bragg reflector and the adjustable lattice constant of a compositionally graded buffer. Prior work showed that these properties can be combined with low threading dislocation density and high reflectivity. Here, we design and demonstrate complex GBBRs for specific metamorphic solar cell applications. We design buffers that provide (1) high reflectivity over a narrow bandwidth, for quantum well solar cells, (2) reflectivity over a wide bandwidth, for optically thin solar cells, and (3) low sidelobe reflection, for multijunction devices that demand low out-of-band reflection. Apodized and triple GBBRs are demonstrated, and transparency is always considered, requiring designs with carefully engineered material combinations. A GBBR with a reflection of 99% is demonstrated, as well as a triple GBBR that has over 80% reflection for 100?nm of the spectrum around 800?nm. We also analyze potential deviations in a baseline GBBR from that of a perfect DBR using transmission electron microscopy to analyze imperfections in the material and modeling to analyze the impact of imperfect refractive index data for lattice-mismatched AlGaInAs. Minimal crosshatch roughness and unintentional thickness variation occur throughout the buffer, which likely influences reflection slightly. Small deviations between the calculated AlGaInAs and utilized AlGaAs refractive index exist, giving methods for future GBBR improvement. While the GBBR designs are intended for metamorphic solar cells, the broad and high reflection may also be useful for other optoelectronic devices such as light-emitting diodes or lasers.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2021

Irradiation Experiments on High Efficiency Nanowire Solar Cells Including Tilted Incidence Angle

Nanowire based solar cells have promising potential to become the next generation of space solar cells. In this study we corroborate their high radiation tolerance by irradiating high efficiency GaAs (efficiency > 15 %) nanowire solar cells with 1 MeV electrons at a fluence of 10 16 e - /cm 2 . Additionally, we theoretically show that the damage in nanowire solar cells is expected to be slightly dependent on the incidence angle and the geometry of the nanowire array. However, experimentally, two sets of GaAs nanowire solar cells have been irradiated with 1 MeV electrons at normal incidence and with a 25° tilted angle exhibiting a similar degradation.

high specific power↗

DOE OSTI2020

High Efficiency 6-Junction Solar Cells for the Global and Direct Spectra

We show 6-junction inverted metamorphic solar cells with high efficiencies under both the global and direct spectrum, and discuss improvements to device components. High voltage AlGaInP subcells are demonstrated on GaAs substrates miscut 2° towards (111)B by using Sb surfactant to reduce atomic ordering. This miscut enables high voltage and low dislocation density GaInAs subcells by using atomically-ordered GaInP-based graded buffers. One-sun efficiencies of 39.2 ± 1.3% under the global spectrum and 39.4 ± 1.1% direct spectrum have been demonstrated by using these high voltage subcell components. For high efficiency under the concentrated direct spectrum, low resistance is also necessary, which requires a challenging and nonintuitive optimization of tunnel junctions and heterobarriers. Increasing the thickness of a (Al)GaInAs spacer layer between the back surface fields (BSF) and tunnel junctions (TJ) of latticemismatched subcells reduces nonlinear resistance, which implies a detrimental interaction between the BSF and TJ. Concentrator devices with optimized spacer layers show reduced effective resistance and maintain fill factor > 75% at 1100 suns. Device efficiencies under the concentrated direct spectrum peak at 47.1 ± 3.2% at 143 suns.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2020

Measurements of Six-Junction Concentrator Solar Cells

Accurate measurements of six-junction inverted metamorphic concentrator solar cells under AM1.5 direct spectrum are obtained by adjusting the spectrum of a tunable high-intensity solar simulator with custom mirrors. Isotype reference cells and broadband InGaAs QE calibration cells were developed for accurate measurements. Modeling and varying the illumination show that an unavoidable 15% - 17% overillumination on the sixth junction does not result in significant error of these 6J IMM devices. Spectrally adjusted flash measurements are independently confirmed by NREL's Cell and Module Performance team. Concentration measurements of a 6J IMM solar cell resulted in 47.1 ± 3.2% (absolute) efficiency at 143 suns.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2020

Learning from existing photovoltaic technologies to identify alternative perovskite module designs

Perovskite solar cells have now become the most efficient of all multicrystalline thin film photovoltaic technologies, reaching 25.2% in 2019. This outstanding figure of merit has only been achieved on small lab-scale devices, with significantly lower performance when processed on larger more industrially relevant substrate sizes. Perovskite modules, connecting several smaller area cells together, are commonly demonstrated with a superstrate monolithic interconnection method. However, several other module designs exist and remain largely unexplored by the perovskite community. In this work, we review and highlight those alternatives and discuss their advantages and limitations. We propose that a singulated substrate-oriented module design, using metallic substrates, could provide a quicker path to seeing highly efficient, lightweight, and flexible perovskite modules on the market, while mitigating near-term technical risks. Finally, as an experimental starting-point towards this design, we demonstrate a substrate-oriented all-perovskite 2-terminal tandem with 18% efficiency.

14 SOLAR ENERGY↗

DOE OSTI2020

Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems

Wide–band gap metal halide perovskites are promising semiconductors to pair with silicon in tandem solar cells to pursue the goal of achieving power conversion efficiency (PCE) greater than 30% at low cost. However, wide–band gap perovskite solar cells have been fundamentally limited by photoinduced phase segregation and low open-circuit voltage. Here, we report efficient 1.67–electron volt wide–band gap perovskite top cells using triple-halide alloys (chlorine, bromine, iodine) to tailor the band gap and stabilize the semiconductor under illumination. We show a factor of 2 increase in photocarrier lifetime and charge-carrier mobility that resulted from enhancing the solubility of chlorine by replacing some of the iodine with bromine to shrink the lattice parameter. We observed a suppression of light-induced phase segregation in films even at 100-sun illumination intensity and less than 4% degradation in semitransparent top cells after 1000 hours of maximum power point (MPP) operation at 60°C. By integrating these top cells with silicon bottom cells, we achieved a PCE of 27% in two-terminal monolithic tandems with an area of 1 square centimeter.

14 SOLAR ENERGY↗