Search NASA⌕ Search

Engineering topics

Greeley, Ronald

Publications and source records attributed to Greeley, Ronald.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

En Echelon Ridge and Trough Structures on Europa

Europa#s surface is tectonically and morphologically complex. Europan ridges, bands, ridged bands, double ridges, complex ridges, and troughs are collectively referred to as lineaments. Some lineaments are fault zones and exhibit sets of en echelon ridge and trough structures (EERTS). EERTS can be used to interpret the stress field in which the lineaments formed. These observations suggest that some lineaments at low latitudes initially formed as shear zones. rather than as purely tensional fractures as is commonly assumed. From stepping directions of EERTS and the offset directions of the lineaments in which they occur, we infer that some EERTS form as a result of compressional stress and others form as a result of tensional stress. EERTS that are inferred to form in compression are morphologically indistinguishable from EERTS that form in tension. The presence of tensional EERTS may support a diapiric origin for some ridges.

Michalski, Joseph R.↗
NASA NTRS2002

Terrestrial Analogs to Wind-Related Features at the Viking and Pathfinder Landing Sites on Mars

Features in the Mojave Desert and Iceland provide insight into the characteristics and origin of Martian wind-related landforms seen by the Viking and Pathfinder landers. The terrestrial sites were chosen because they exhibit diverse wind features that are generally well understood. These features have morphologies comparable to those on Mars and include origins by deposition and erosion, with erosional processes modifying both soils and rocks. Duneforms and drifts are the most common depositional features seen at the Martian landing sites and indicate supplies of sand-sized particles blown by generally unidirectional winds. Erosional features include lag deposits, moat-like depressions around some rocks, and exhumed soil horizons. They indicate that wind can deflate at least some sediments and that this process is particularly effective where the wind interacts with rocks. The formation of ripples and wind tails involves a combination of depositional and erosional processes. Rock erosional features, or ventifacts, are recognized by their overall shapes, erosional flutes, and characteristic surface textures resulting from abrasion by windblown particles. The physics of saltation requires that particles in ripples and duneforms are predominantly sand-sized (60-2000 microns). The orientations of duneforms, wind tails, moats, and ventifacts are correlated with surface winds above particle threshold. Such winds are influenced by local topography and are correlated with winds at higher altitudes predicted by atmospheric models.

Greeley, Ronald↗
NASA NTRS2002

Saltation Impact as a Means for Raising Dust on Mars

Experiments were conducted under atmospheric pressures appropriate for Earth and Mars to determine the efficiency of sand in saltation as a means for raising dust into the atmosphere under wind speeds which would otherwise be too low for dust entrainment. Experiments involving intimate mixtures of sand and dust (1:1 ratio by mass) showed that after an initial flurry of activity of a few seconds duration, the bed stabilized with little movement of either sand or dust. In contrast, sands set into saltation upwind fro= dust beds were efficient in injecting the dust into suspension, with low-pressure Martian conditions being some five times more efficient than terrestrial conditions. This result is attributed to the higher kinetic energies of the saltating grains on Mars, which is a consequence of the higher velocities of the grains. These results suggest that sands saltating across dust beds on Mars are an effective means for setting dust into suspension.

Greeley, Ronald↗
NASA NTRS2001

Evaluation of Sulfur Flow Emplacement on Io from Galileo Data and Numerical Modeling

Galileo images of bright lava flows surrounding Emakong Patera have been analyzed and numerical modeling has been performed to assess whether these flows could have resulted from the emplacement of sulfur lavas on Io. Images from the solid-state imaging.(SSI) camera show that these bright, white to yellow Emakong flows are up to 370 km long and contain dark, sinuous features that are interpreted to be lava conduits, approx. 300-500 m wide and > 100 km long. Near-Infrared Mapping Spectrometer (NIMS) thermal emission data yield a color temperature estimate of 344 K +/- 60 K (less than or equal to 131 C) within the Emakong caldera. We suggest that these bright flows likely resulted from either sulfur lavas or silicate lavas that have undergone extensive cooling, pyroclastic mantling, and/or alteration with bright sulfurous materials. The Emakong bright flows have estimated volumes of approx. 250-350 cu km, similar to some of the smaller Columbia River Basalt flows. If the Emakong flows did result from effusive sulfur eruptions, then they are orders of magnitude greater in volume than any terrestrial sulfur flows. Our numerical modeling results show that sulfur lavas on Io could have been emplaced as turbulent flows, which were capable of traveling tens to hundreds of kilometers, consistent with the predictions of Sagan [ 19793 and Fink et al. [ 19831. Our modeled flow distances are also consistent with the measured lengths of the Emakong channels and bright flows. Modeled thermal erosion rates are approx. 1-4 m/d for flows erupted at approx. 140-180 C, which are consistent with the melting rates of Kieffer et al. [2000]. The Emakong channels could be thermal erosional in nature; however, the morphologic signatures of thermal erosion channels cannot be discerned from available images. There are planned Galileo flybys of Io in 2001 which provide excellent opportunities to obtain high-resolution morphologic and color data of Emakong Patera. Such observations could, along with further modeling, provide additional information to better constrain whether sulfur lavas produced the Emakong flows.

Williams, David A.↗
NASA NTRS2001

The Summer 1997 Eruption at Pillan Patera on Io: Implications for Ultrabasic Lava Flow Emplacement

Galileo data and numerical modeling were used to investigate the summer 1997 eruption at Pillan Patera on Io. This event, now defined as 'Pillanian' eruption style, included a high-temperature (greater than 1600 C), possibly ultrabasic, 140-km-high plume eruption that deposited dark, orthopyroxene-rich pyroclastic material over greater than 125,000 sq km, followed by emplacement of dark flow-like material over greater than 3100 sq km to the north of the caldera. We estimate that the high-temperature, energetic episode of this eruption had a duration of 52- 167 days between May and September 1997, with peak eruption temperatures around June 28, 1997. Galileo 20 m/pixel images of part of the Pillan flow field show a widespread, rough, pitted surface that is unlike any flow surface we have seen before. We suggest that th.s surface may have resulted from (1) a fractured lava crust formed during rapid, low-viscosity lava surging, perhaps including turbulent flow emplacement; (2) disruption of the lava flow by explosive interaction with a volatile-rich substrate: or (3) a combination of 1 and 2 with or without accumulation of pyroclastic materials on the surface. Well-developed flow lobes are observed, suggesting that this is a relatively distal part of the flow field. Shadow measurements at flow margins indicate a thickness of approx. 8-10 m. We have modeled the emplacement of putative ultrabasic flows from the summer 1997 Pillan eruption using constraints from new Galileo data. Results suggest that either laminar sheet flows or turbulent channelized flows could have traveled 50-150 km on a flat. unobstructed surface, which is consistent with the estimated length of the Pillan flow field (approx. 60 km). Our modeling suggests low thermal erosion rates (less than 0.1 m/d), and that the formation of deep (greater than 20 m) erosion channels was unlikely, especially distal to the source. We calculate a volumetric flow rate of approx. 2-7 x l0(exp 3) cu m/s, which is greater than those for typical Mauna Loa/Kilauea flows but comparable to those for the (1783) Laki eruption and the inferred flow rates of the Roza flows in the Columbia River flood basalts. The differences in ultrabasic eruption styles on Earth and Io appear to be controlled by the different eruption environments: Plumes at sites of ultrabasic eruptions on Io suggest strong magma-volatile: interactions on a low-gravity body lacking an atmosphere, whereas the geology at sites of komatiite eruptions on Earth suggest mostly submarine emplacement of thick flows with a pronounced lack of subaerial explosive activity.

Williams, David A.↗
NASA NTRS2001

The Summer 1997 Eruption at Pillan Patera on Io: Implications for Ultrabasic Lava Flow Emplacement

Galileo data and numerical modeling were used to investigate the summer 1977 eruption at Pillan Patera on Io. This event, now defined as "Pillanian" eruption style, included a high-temperature (greater than 1600 C), possible ultrabasic , 140-km-high plume eruption that deposited dark, orthopyroxene-rich pyroclastic material over greater than 125,000 sq km, followed by emplacement of dark flow-like material over greater than 3100 sq km to the north of the caldera. We estimate that the high-temperature, energetic episode of this eruption had a duration of 52 - 167 days between May and September 1997, with peak eruption temperatures around June 28, 1997. Galileo 20 m/pixel images of part of the Pillan flow field show a wide-spread, rough, pitted surface that is unlike any flow surface we have seen before. We suggest that this surface may have resulted from: 1. A fractured lava crust formed during rapid, low-viscosity lava surging, perhaps including turbulent flow emplacement. 2. Disruption of the lava flow by explosive interaction with a volatile-rich substrate. or 3. A combination of 1 and 2 with or without accumulation of pyroclastic material on the surface. Well-developed flow lobes are observed, suggesting that this is a relatively distant part of the flow field.Shadow measurements at flow margins indicate a thickness of-8 - 10 m. We have modeled the emplacement of putative ultrabasic flow from the summer 1997 Pillan eruption using constraints from new Galileo data. Results suggest that either laminar sheet flows or turbulent channelized flows could have traveled 50 - 150 km on a flat, unobstructed surface, which is consistent with the estimated length of the Pillan flow field (approx. 60 km). Our modeling suggests low thermal erosion rates (less than 4.1 m/d), and that the formation of deep (greater than 20 m) erosion channels was unlikely, especially distal to the source. We calculate a volumetric flow rate of approx. 2 - 7 x 10(exp 3)cu m/s, which is greater than those for typical Mauna Loa/Kilaueaq flows but comparable to those for the (1783) Laki eruption and the inferred flow rates of the Roza flows in the Columbia River flood basalts. The differences in ultrabasic eruption styles on Earth and Io appear to be controlled by the different eruption environments; Plumes at sites of ultrabasic eruptions on Io suggest strong magma-volatile interactions on a low-gravity body lacking an atmosphere, whereas the geology at sites of komatiite eruptions on Earth suggest mostly submarine emplacement of thick flows with a pronounced lack of subaerial explosive activity.

Williams, David A.↗
NASA NTRS2001

Evaluation of Sulfur Flow Emplacement on Io from Galileo Data and Numerical Modeling

Galileo images of bright lava flows surrounding Emakong Patera have bee0 analyzed and numerical modeling has been performed to assess whether these flows could have resulted from the emplacement of sulfur lavas on Io. Images from the solid-state imaging (SSI) camera show that these bright, white to yellow Emakong flows are up to 370 km long and contain dark, sinuous features that are interpreted to be lava conduits, -300-500 m wide and >lo0 km lorig. Neiu-Infrared Mapping S estimate of 344 K f 60 G131'C) within the Bmakong caldera. We suggest that these bright flows likely resulted from either sulfur lavas or silicate lavas that have undergone extensive cooling, pyroclastic mantling, and/or alteration with bright sulfurous materials. The Emakoag bright flows have estimated volume of -250-350 km', similar to some of the smaller Columbia River Basalt flows, If the Emakong flows did result from effusive sulfur eruptions, then they are orders of magnitude reater in volume than any terrestrial sulfur flows. Our numerical modeling capable of traveling tens to hundreds of kilometers, consistent with the predictions of Sagan. Our modeled flow distances are also consistent with the measured lengths of the Emakong channels and bright flows.

Williams, David A.↗
NASA NTRS2001

Radar Attenuation by Sand: Laboratory Measurement of Radar Transmission

Under certain conditions, radar is able to penetrate loose sand to reveal subsurface geology in arid areas. However, backscatter from the subsurface is modified by signal attenuation by the sand, To quantify the amount of radar transmission as a function of radar frequency and sand moisture. The frequency range covers P-through X-bands (0.5 - 12.6 GHz), and the moisture contents of the sand were 0.3, 4.7, and 10.7% by volume. Results show that addition of the sand causes a small decrease in transmission at low frequencies for all three moisture levels, but the sand causes a large decrease in transmission at higher frequencies. The transmission measurements were also used to calculate values for attenuation, The dry sand resulted in attenuations of less than 6 dB/m over the entire frequency range. Sand with moisture contents of 4.7 and 10.7% volume caused by attenuations greater than 150 dB/m at the highest frequencies, but the attenuation values calculated for P-and L-band frequencies were less than 10 dB/m even at these relatively high moisture levels. THese results challenge previous restrictions that sand must be extremely dry for radar penetration to occur.

Williams, Kevin K.↗
NASA NTRS2001

Geology of Lofn Crater, Callisto

Lofn crater is a 180-km-diameter impact structure in the southern cratered plains of Callisto and is among the youngest features seen on the surface. The Lofn area was imaged by the Galileo spacecraft at regional-scale resolutions (875 m/pixel), which enable the general geology to be investigated. The morphology of Lofn crater suggests that (1) it is a class of impact structure intermediate between complex craters and palimpsests or (2) it formed by the impact of a projectile which fragmented before reaching the surface, resulting in a shallow crater (even for Callisto). The asymmetric pattern of the rim and ejecta deposits suggests that the impactor entered at a low angle from the northwest. The albedo and other characteristics of the ejecta deposits from Lofn also provide insight into the properties of the icy lithosphere and subsurface configuration at the time of impact. The "target" for the Lofn impact is inferred to have included layered materials associated with the Adlinda multiring structure northwest of Loh and ejecta deposits from the Heimdall crater area to the southeast. The Lofn impact might have penetrated through these materials into a viscous substrate of ductile ice or possibly liquid water. This interpretation is consistent with models of the current interior of Callisto based on geophysical information obtained from the Galileo spacecraft.

Greeley, Ronald↗
NASA NTRS2001

Studies in Martian Aeolian Geology

This report gives the results from the investigation through March 15, 1999 for the first two years of the three year investigation (year 3 runs from March 1, 1999 to February 27, 2000). The investigation included three tasks, all involving windblown dust (particles a few micrometers in diameter) to simulate the aeolian regime on Mars. Experiments were conducted primarily in the Mars Surface Wind Tunnel (MARSWIT) at NASA-Ames Research Center.

Greeley, Ronald↗
NASA NTRS2001

Aeolian Processes and their Effects on Understanding the Chronology of Mars

Aeolian (wind) processes can transport particles over large distances on Mars, leading to the modification or removal of surface features, formation of new landforms, and mantling or burial of surfaces. Erosion of mantling deposits by wind deflation can exhume older surfaces. These processes and their effects on the surface must be taken into account in using impact crater statistics to derive chronologies on Mars. In addition, mapping.the locations, relative ages. and orientations of aeolian features can provide insight into Martian weather, climate, and climate history.

Greeley, Ronald↗
NASA NTRS2001

Wind-Related Modification of Some Small Impact Craters on Mars

Inferred wind-related modifications of impact craters are observed in the vicinity of the Mare Pathfinder (MPF) site and in other regions of Mars. Mars Orbiter Camera (MOC) images show three types of inferred wind-modified morphologies for craters 0.3-1 km in diameter Such modifications could be related to seasonal variations of the strongest winds and a possible paleowind regime. Geomorphic mapping of Big Crater at the MPF shows evidence of former aeolian modification of the crater rim and interiors similar to smaller craters in the area. The morphologic patterns are in good agreement with the results from the Mars Regional Atmospheric Modeling Simulation (MRAMS) of topographically forced wind circulation and atmosphere surface interactions generated by flow over small craters. Simulations show that the maximum surface stress is on the downwind crater rim, consistent with inferred wind modification of the crater rim seen in MOC images. The trend of the Inferred paleowind regime at the MPF site cannot be explained by a change In the global atmospheric circulation resulting ~ from changes in Mars obliquity. We suggest that this wind regime could be associated with a regional meteorological pattern that is not modeled by global scale circulation, An alternative explanation is that Mars spin axis was in a different geographic position than it is at present.

Kuzmin, Ruslan O.↗
NASA NTRS2000

Geological History of the Tyre Region of Europa: A Regional Perspective on Europan Surface Features and Ice Thickness

Galileo images of the Tyre Macula region of Europa at regional (170 m/pixel) and local (approx. 40 m/pixel) scales allow mapping and understanding of surface processes and landforms. Ridged plains, doublet and complex ridges, shallow pits, domes, "chaos" areas. impact structures, tilted blocks and massifs, and young fracture systems indicate a complex history of surface deformation on Europa. Regional and local morphologies of the Tyre region of Europa suggest that an impactor penetrated through several kilometers of water ice tc a mobile layer below. The surface morphology was initially dominated by formation of ridged plains, followed by development of ridge bands and doublet ridges, with chaos and fracture formation dominating the latter part of the geologic history of the Tyre region. Two distinct types of chaos have been identified which, along with upwarped dome materials, appear to represent a continuum of features (domes-play chaos-knobby chaos) resulting from increasing degree of surface disruption associated with local lithospheric heating and thinning. Local and regional stratigraphic relationships, block heights, and the morphology of the Tyre impact structure suggest the presence of low-viscosity ice or liquid water beneath a thin (severa1 kilometers) surface ice shell at the time of the impact. The very low impact crater density on the surface of Europa suggests that this thin shell has either formed or been thoroughly resurfaced in the very recent past.

Kadel, Steven D.↗
NASA NTRS2000

Mars Pathfinder Landing Site: Evidence for a Change in Wind Regime from Lander and Orbiter Data

Surface features related to the wind are observed in the vicinity of the Mars Pathfinder (MPR landing site data from the lander and in data from orbit by the Viking Orbiter and Mars Global Surveyor missions. Features seen from the surface include wind tails associated with small rocks, barchanoid duneforms, ripplelike patterns, and ventifact flutes cut into some rocks. Features seen from orbit include wind tails associated with impact craters, ridges inferred to be duneforms, and modified crater rims interpreted to have been eroded and mantled by windblown material. The orientations of these features show two prevailing directions. One is inferred to represent winds from the northeast, which is consistent with strongest winds predicted by a general circulation model to occur during the Martian northern winter under current conditions. A second wind blowing from the ESE was responsible for modifying the crater rims and cutting some of the ventifacts. The two wind regimes could reflect a change in climate related to Mars' obliquity or some other, unknown factor. Regardless of the cause, the MPF area has been subjected to a complex pattern of winds and supply of small particles, and the original surface formed by sedimentary processes from Tiu and Ares Vallis flooding events has been modified by repeated burial and exhumation.

Greeley, Ronald↗
NASA NTRS2000

Volcanism on the Red Planet: Mars

Of all the planets in the Solar System, Mars is the most Earthlike in its geological characteristics. Like Earth, it has been subjected to exogenic processes, such as impact cratesing and erosion by wind and water, as well as endogenic processes, including tectonic deformation of the crust and volcanism. The effects of these processes are amply demonstrated by the great variety of surface features, including impact craters, landslides, former river channels, sand dunes, and the largest volcanoes in the Solar System. Some of these features suggest substantial changes in Mars' environment during its history. For example, as reviewed by Carr, today Mars is a cold, dry desert with an average atmospheric pressure of only 5.6 mbar which does not allow liquid water to exist on the surface. To some planetary scientists, the presence of the channels bespeaks a time when Mars was warmer and wetter. However, others have argued that these features might have formed under current conditions and that there might not have been a shift in climate. Could the morphology of volcanoes and related features provide clues to past Martian environments? What role is played by atmospheric density in the styles of eruptions on Mars and resulting landforms? If these and related questions can be answered, then we may have a means for assessing the conditions on Mars' surface in the past and comparing the results with models of Martian evolution. In this chapter, we outline the sources of information available for volcanism on Mars, explore the influence of the Martian environment on volcanic processes, and describe the principal volcanic features and their implications for understanding the general evolution of the Martian surface.

Greeley, Ronald↗
NASA NTRS1999

Venus Aerobot Surface Science Imaging System (VASSIS)

The VASSIS task was to design and develop an imaging system and container for operation above the surface of Venus in preparation for a Discovery-class mission involving a Venus aerobot balloon. The technical goals of the effort were to: a) evaluate the possible nadir-viewed surface image quality as a function of wavelength and altitude in the Venus lower atmosphere, b) design a pressure vessel to contain the imager and supporting electronics that will meet the environmental requirements of the VASSIS mission, c) design and build a prototype imaging system including an Active-Pixel Sensor camera head and VASSIS-like optics that will meet the science requirements. The VASSIS science team developed a set of science requirements for the imaging system upon which the development work of this task was based.

Greeley, Ronald↗
NASA NTRS1999

Windblown Features on Venus and Geological Mapping

The objectives of this study were to: 1) develop a global data base of aeolian features by searching Magellan coverage for possible time-variable wind streaks, 2) analyze the data base to characterize aeolian features and processes on Venus, 3) apply the analysis to assessments of wind patterns near the surface and for comparisons with atmospheric circulation models, 4) analyze shuttle radar data acquired for aeolian features on Earth to determine their radar characteristics, and 5) conduct geological mapping of two quadrangles. Wind, or aeolian, features are observed on Venus and aeolian processes play a role in modifying its surface. Analysis of features resulting from aeolian processes provides insight into characteristics of both the atmosphere and the surface. Wind related features identified on Venus include erosional landforms (yardangs), depositional dune fields, and features resulting from the interaction of the atmosphere and crater ejecta at the time of impact. The most abundant aeolian features are various wind streaks. Their discovery on Venus afforded the opportunity to learn about the interaction of the atmosphere and surface, both for the identification of sediments and in mapping near-surface winds.

Greeley, Ronald↗