Search NASA⌕ Search

Engineering topics

Gu, Lin

Publications and source records attributed to Gu, Lin.

At least 109 records · Page 6

Atomic-resolution imaging of electrically induced oxygen vacancy migration and phase transformation in SrCoO 2.5-σ

Oxygen ion transport is the key issue in redox processes. Visualizing the process of oxygen ion migration with atomic resolution is highly desirable for designing novel devices such as oxidation catalysts, oxygen permeation membranes, and solid oxide fuel cells. We show the process of electrically induced oxygen migration and subsequent reconstructive structural transformation in a SrCoO 2.5-σ film by scanning transmission electron microscopy. We find that the extraction of oxygen from every second SrO layer occurs gradually under an electrical bias; beyond a critical voltage, the brownmillerite units collapse abruptly and evolve into a periodic nano-twined phase with a high c/a ratio and distorted tetrahedra. These results show that oxygen vacancy rows are not only natural oxygen diffusion channels, but also preferred sites for the induced oxygen vacancies. These direct experimental results of oxygen migration may provide a common mechanism for the electrically induced structural evolution of oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-layered Au clusters on α-MoC as catalysts for the low-temperature water-gas shift reaction

Here, the water-gas shift (WGS) reaction (where carbon monoxide plus water yields dihydrogen and carbon dioxide) is an essential process for hydrogen generation and carbon monoxide removal in various energy-related chemical operations. This equilibrium-limited reaction is favored at a low working temperature. Potential application in fuel cells also requires a WGS catalyst to be highly active, stable, and energy-efficient and to match the working temperature of on-site hydrogen generation and consumption units. We synthesized layered gold (Au) clusters on a molybdenum carbide (α-MoC) substrate to create an interfacial catalyst system for the ultralow-temperature WGS reaction. Water was activated over α-MoC at 303 kelvin, whereas carbon monoxide adsorbed on adjacent Au sites was apt to react with surface hydroxyl groups formed from water splitting, leading to a high WGS activity at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing Air-Stable O 3 -Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries

As promising high-capacity cathode materials for Na-ion batteries, O 3 -type Na-based metal oxides always suffer from their poor air stability originating from the spontaneous extraction of Na and oxidation of transition metals when exposed to air. Here, a combined structure modulation is proposed to tackle concurrently the two handicaps via reducing Na layers spacing and simultaneously increasing valence state of transition metals. Guided by density functional theory calculations, we demonstrate such a modulation can be subtly realized through cosubstitution of one kind of heteroatom with comparable electronegativity and another one with substantially different Fermi level, by adjusting the structure of NaNi 0.5 Mn 0.5 O 2 via Cu/Ti codoping. The as-obtained NaNi 0.45 Cu 0.05 Mn 0.4 Ti 0.1 O 2 exhibits an increase of 20 times in stable air-exposure period and 9 times in capacity retention after 500 cycles, and even retains its structure and capacity after being soaked in water. In such a simple and effective structure modulation reveals a new avenue for high-performance O 3 -type cathodes and pushes the large-scale industrialization of Na-ion batteries a decisive step forward.

25 ENERGY STORAGE↗

δ -Doping of oxygen vacancies dictated by thermodynamics in epitaxial SrTiO 3 films

Homoepitaxial SrTiO 3 (110) film is grown by molecular beam epitaxy in ultra-high vacuum with oxygen diffusing from substrate as the only oxidant. The resulted oxygen vacancies (V O s ) are found to be spatially confined within few subsurface layers only, forming a quasi-two-dimensional doped region with a tunable high concentration. Such a δ-function distribution of V O s is essentially determined by the thermodynamics associated with the surface reconstruction, and facilitated by the relatively high growth temperature. Here, our results demonstrate that it is feasible to tune V O s distribution at the atomic scale by controlling the lattice structure of oxide surfaces. Transition metal oxide interfaces have exhibited a variety of novel phenomena, including the high-mobility two-dimensional electron gas, superconductivity and unusual magnetism. While these phenomena are inherently related to the artificially designed architecture, oxygen vacancies (V O s ) are recognized to be particularly important in determining the exotic behaviors of the oxides systems. As electron donors in oxides, V O s were observed to be one of the major factors for the high carrier density at the LaAlO 3 /SrTiO 3 interface. V O s induce ferromagnetism in the epitaxial LaCoO 3 films via the ordering of excess electrons in Co 3d orbit. It was also suggested that the existence of V O s plays an important role in the formation of undesirable insulating phase in ultrathin films of many metallic oxide materials, referred to as the “dead layer” behavior. How V O s are involved in such complex phenomena is still unclear. One essential issue toward the design of emergent properties of oxide films is how to characterize and control V O s at the atomic scale. Recently, quantitative measurements of V O concentration have been realized with high spatial resolution benefited by the development of the state-of-the-art aberration-corrected scanning transmission microscope (STEM) and related spectroscopy techniques. However, tuning the V O density precisely by growth control is still extremely challenging. Different oxidants, i.e., molecular O 2 , O 3 and atomic O, have been used with different feeding pressure during the growth. This approach is limited by thermodynamics of the material since the pressure of oxidant has to coordinate with temperature and other parameters in order to ensure the formation of the desired phase. In many cases the optimal condition for oxygen stoichiometry cannot be reached, and residual V O s are inevitably formed. It has been reported that V O s even form inhomogeneous clusters in SrTiO 3 (STO) films. Post annealing is another thermodynamic approach and seems to be effective to reduce the V O density. However, it does not allow the precise control of V O s distribution at the atomic scale either. In the current work, to study the control of V O s at the atomic scale, we grow SrTiO 3 homoepitaxial films along the polar [110] direction. Atomically well-defined (4 × 1) reconstruction is maintained on the surface all through the growth [see Fig. 1 (a) and (b)], which compensates the polarity. More importantly, the energy configuration associated with the surface reconstruction results in the spatial confinement of V O s within only few subsurface layers of the film, while their concentration remains extremely low on the topmost surface and in the bulk of STO substrate. In conclusion, we show that such a quasi-two-dimensional (2D) V O -doped layer, mimicking the δ-doping case in conventional semiconductors, can be precisely controlled.

36 MATERIALS SCIENCE↗

Electric-field control of tri-state phase transformation with a selective dual-ion switch

Materials can be transformed from one crystalline phase to another by using an electric field to control ion transfer, in a process that can be harnessed in applications such as batteries, smart windows and fuel cells. Increasing the number of transferrable ion species and of accessible crystalline phases could in principle greatly enrich material functionality. However, studies have so far focused mainly on the evolution and control of single ionic species (for example, oxygen, hydrogen or lithium ions). In this paper, we describe the reversible and non-volatile electric-field control of dual-ion (oxygen and hydrogen) phase transformations, with associated electrochromic and magnetoelectric effects. We show that controlling the insertion and extraction of oxygen and hydrogen ions independently of each other can direct reversible phase transformations among three different material phases: the perovskite SrCoO 3-δ , the brownmillerite SrCoO 2.5 , and a hitherto-unexplored phase, HSrCoO 2.5 . By analysing the distinct optical absorption properties of these phases, we demonstrate selective manipulation of spectral transparency in the visible-light and infrared regions, revealing a dual-band electrochromic effect that could see application in smart windows. Moreover, the starkly different magnetic and electric properties of the three phases—HSrCoO 2.5 is a weakly ferromagnetic insulator, SrCoO 3-δ is a ferromagnetic metal, and SrCoO 2.5 is an antiferromagnetic insulator—enable an unusual form of magnetoelectric coupling, allowing electric-field control of three different magnetic ground states. Finally, these findings open up opportunities for the electric-field control of multistate phase transformations with rich functionalities.

36 MATERIALS SCIENCE↗

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Tunable thermal expansion in framework materials through redox intercalation

Thermal expansion properties of solids are of fundamental interest and control of thermal expansion is important for practical applications but can be difficult to achieve. Many framework type materials show negative thermal expansion when internal cages are empty but positive thermal expansion when additional atoms or molecules fill internal voids present, offering a potential route for control. Here we show that redox intercalation offers an effective method to control thermal expansion from positive to zero to negative by insertion of Li ions into the simple negative thermal expansion framework material ScF 3 , doped with 10% Fe to enable reduction. The small concentration of intercalated Li ions has a strong influence through steric hindrance of transverse fluoride ion vibrations, which directly controls the thermal expansion. As a result, redox intercalation of guest ions is thus likely to be a general and effective method for controlling thermal expansion in the many known framework materials with phonon-driven negative thermal expansion.

36 MATERIALS SCIENCE↗

A self-forming composite electrolyte for solid-state sodium battery with ultra-long cycle life

Replacing organic liquid electrolyte with inorganic solid electrolytes (SE) can potentially address the inherent safety problems in conventional rechargeable batteries. Furthermore, all-solid-state batteries have been plagues by the relatively low ionic conductivity of solid electrolytes and large charge-transfer resistance resulted from solid-solid interfaces between electrode materials and solid electrolytes. Here we report a new design strategy for improving the ionic conductivity of solid electrolyte by self-forming a composite material. An optimized Na + ion conducting composite electrolyte derived from the NASICON structure was successfully synthesized, yielding ultra-high ionic conductivity of 3.4 mS cm –1 at 25°C and 14 ms cm –1 at 80°C.

25 ENERGY STORAGE↗

Temperature-dependent resistance switching in SrTiO{sub 3}

Resistance switching phenomena were studied by varying temperature in SrTiO{sub 3} single crystal. The resistance hysteresis loops appear at a certain temperature ranging from 340 K to 520 K. With the assistance of 375 nm ultraviolet continuous laser, the sample resistance is greatly reduced, leading to a stable effect than that in dark. These resistance switching phenomena only exist in samples with enough oxygen vacancies, which is confirmed by spherical aberration-corrected scanning transmission electron microscopy measurements, demonstrating an important role played by oxygen vacancies. At temperatures above 340 K, positively charged oxygen vacancies become mobile triggered by external electric field, and the resistance switching effect emerges. Our theoretical results based on drift-diffusion model reveal that the built-in field caused by oxygen vacancies can be altered under external electric field. Therefore, two resistance states are produced under the cooperative effect of built-in field and external field. However, the increasing mobility of oxygen vacancies caused by higher temperature promotes internal electric field to reach equilibrium states quickly, and suppresses the hysteresis loops above 420 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Interactions at the Nanoscale in Trilayer Titanates

We report on the phase diagram of competing magnetic interactions at the nanoscale in engineered ultrathin trilayer heterostructures of LaTiO3/SrTiO3/YTiO3, in which the interfacial inversion symmetry is explicitly broken. Combined atomic layer resolved scanning transmission electron microscopy with electron energy loss spectroscopy and electrical transport have confirmed the formation of a spatially separated two-dimensional electron liquid and high density two-dimensional localized magnetic moments at the LaTiO3/SrTiO3 and SrTiO3/YTiO3 interfaces, respectively. Resonant soft x-ray linear dichroism spectroscopy has demonstrated the presence of orbital polarization of the conductive LaTiO3/SrTiO3 and localized SrTiO3/YTiO3 electrons. Our results provide a route with prospects for exploring new magnetic interfaces, designing a tunable two-dimensional d-electron Kondo lattice, and potential spin Hall applications.

Cao, Yanwei↗

Mott Electrons in an Artificial Graphenelike Crystal of Rare-Earth Nickelate S.

Deterministic control over the periodic geometrical arrangement of the constituent atoms is the backbone of the material properties, which, along with the interactions, define the electronic and magnetic ground state. Following this notion, a bilayer of a prototypical rare-earth nickelate, NdNiO3, combined with a dielectric spacer, LaAlO3, has been layered along the pseudocubic [111] direction. The resulting artificial graphenelike Mott crystal with magnetic 3d electrons has antiferromagnetic correlations. In addition, a combination of resonant X-ray linear dichroism measurements and ab initio calculations reveal the presence of an ordered orbital pattern, which is unattainable in either bulk nickelates or nickelate based heterostructures grown along the [001] direction. These findings highlight another promising venue towards designing new quantum many-body states by virtue of geometrical engineering.

Middey, Srimanta↗

Tuning of Photoluminescence by Cation Nanosegregation in the (CaMg) x (NaSc) 1– x Si 2 O 6 Solid Solution

Controlled photoluminescence tuning is important for the optimization and modification of phosphor materials. Herein we report an isostructural solid solution of (CaMg) x (NaSc) 1-x Si 2 O 6 (0 < x < 1) in which cation nanosegregation leads to the presence of two dilute Eu 2+ centers. The distinct nanodomains of isostructural (CaMg)Si 2 O 6 and (NaSc)Si 2 O 6 contain a proportional number of Eu 2+ ions with unique, independent spectroscopic signatures. Density functional theory calculations provided a theoretical understanding of the nanosegregation and indicated that the homogeneous solid solution is energetically unstable. It is shown that nanosegregation allows predictive control of color rendering and therefore provides a new method of phosphor development.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗