Search NASA⌕ Search

Engineering topics

Gu, Lin

Publications and source records attributed to Gu, Lin.

124 records · Page 7

Phase 1 Dose Escalation Study of Accelerated Radiation Therapy With Concurrent Chemotherapy for Locally Advanced Lung Cancer

Purpose: To determine the maximum tolerated dose of radiation therapy (RT) given in an accelerated fashion with concurrent chemotherapy using intensity modulated RT. Methods and Materials: Patients with locally advanced lung cancer (non-small cell and small cell) with good performance status and minimal weight loss received concurrent cisplatin and etoposide with RT. Intensity modulated RT with daily image guidance was used to facilitate esophageal avoidance and delivered using 6 fractions per week (twice daily on Fridays with a 6-hour interval). The dose was escalated from 58 Gy to a planned maximum dose of 74 Gy in 4 Gy increments in a standard 3 + 3 trial design. Dose-limiting toxicity (DLT) was defined as acute grade 3-5 nonhematologic toxicity attributed to RT. Results: A total of 24 patients were enrolled, filling all dose cohorts, all completing RT and chemotherapy as prescribed. Dose-limiting toxicity occurred in 1 patient at 58 Gy (grade 3 esophagitis) and 1 patient at 70 Gy (grade 3 esophageal fistula). Both patients with DLTs had large tumors (12 cm and 10 cm, respectively) adjacent to the esophagus. Three additional patients were enrolled at both dose cohorts without further DLT. In the final 74-Gy cohort, no DLTs were observed (0 of 6). Conclusions: Dose escalation and acceleration to 74 Gy with intensity modulated RT and concurrent chemotherapy was tolerable, with a low rate of grade ≥3 acute esophageal reactions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Room-temperature ferroelectricity of SrTiO{sub 3} films modulated by cation concentration

The room-temperature ferroelectricity of SrTiO{sub 3} is promising for oxide electronic devices controlled by multiple fields. An effective way to control the ferroelectricity is highly demanded. Here, we show that the off-centered antisite-like defects in SrTiO{sub 3} films epitaxially grown on Si (001) play the determinative role in the emergence of room-temperature ferroelectricity. The density of these defects changes with the film cation concentration sensitively, resulting in a varied coercive field of the ferroelectric behavior. Consequently, the room-temperature ferroelectricity of SrTiO{sub 3} films can be effectively modulated by tuning the temperature of metal sources during the molecular beam epitaxy growth. Such an easy and reliable modulation of the ferroelectricity enables the flexible engineering of multifunctional oxide electronic devices.

36 MATERIALS SCIENCE↗

Surface-structure sensitivity of CeO 2 nanocrystals in photocatalysis and enhancing the reactivity with nanogold

Structure–function correlations are a central theme in heterogeneous (photo)catalysis. In this research, using aberration-corrected scanning transmission electron microscopy (STEM), the atomic surface structures of well-defined one-dimensional (1D) CeO 2 nanorods (NRs) and 3D nanocubes (NCs) are directly visualized at subangstrom resolution. CeO 2 NCs predominantly expose the {100} facet, with {110} and {111} as minor cutoff facets at the respective edges and corners. Notably, the outermost surface layer of the {100} facet is nearly O-terminated. Neither surface relaxations nor reconstructions on {100} are observed, indicating unusual polarity compensation, which is primarily mediated by near-surface oxygen vacancies. The surface of CeO 2 NRs is highly stepped, with the enclosed {110} facet exposing Ce cations and O anions on terraces. On the basis of STEM profile-view imaging and electronic structure analysis, the photoreactivity of CeO2 nanocrystals toward aqueous methyl orange degradation under UV is revealed to be surface-structure-sensitive, following the order: {110} >> {100}. The underlying surface-structure sensitivity can be attributed to the variation in low-coordinate surface cerium cations between {110} and {100} facets. To further enhance light absorption, Au nanoparticles (NPs) are deposited on CeO 2 NRs to form Au/CeO 2 plasmonic nanocomposites, which dramatically promotes the photoreactivity that is Au particle size- and excitation light wavelength-dependent. The mechanisms responsible for the enhancement of photocatalytic activity are discussed, highlighting the crucial role of photoexcited charge carrier transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic understanding of Sn whisker growth on the Cu surface in Cu(top)-Sn(bottom) bilayer system upon room temperature aging

Sn whiskers are observed by scanning electron microscope on the Cu surface in Cu(top)-Sn(bottom) bilayer system upon room temperature aging. Only Cu{sub 6}Sn{sub 5} phase appears in the X-ray diffraction patterns and no Sn element is detected in the Cu sublayer by scanning transmission electron microscopy. Based on the interfacial thermodynamics, the intermetallic Cu{sub 6}Sn{sub 5} compound phase may form directly at the Sn grain boundary. Driven by the stress gradient during the formation of Cu{sub 6}Sn{sub 5} compound at Sn grain boundaries, Sn atoms segregate onto the Cu surface and accumulate to form Sn whisker.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-performance ZnO nanowire field-effect transistor with forming gas treated SiO{sub 2} gate dielectrics

The SiO{sub 2} films thermally grown on Si wafer have been annealed in forming atmosphere (N{sub 2}:H{sub 2} = 9:1) prior to use as gate insulators in ZnO nanowire field effect transistors (ZnO NW-FETs). Without the annealing process, ZnO NW-FETs exhibit very poor performance, and most of them even cannot be depleted under a high gate voltage of −100 V; however, with the annealing process in forming atmosphere, the device characteristics can be significantly improved, exhibiting a large turn on-off ratio of ∼10{sup 4} and a low sub-threshold swing ∼1 V/decade. The pre-annealing treatment of SiO{sub 2} (300 nm)/p-Si in N{sub 2}/H{sub 2} ambient may significantly reduce the number of non-bridging oxygen atoms, which blocks the interaction between ZnO nanowires and SiO{sub 2} surface, and finally enhances the electrical characteristics of the back-gated ZnO NW-FETs. In addition, the FET electrode fabrication process introduced in this paper is much simpler than the traditional photo-lithography and lift-off method, which has potential applications in future device fabrication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance improvement of Li-rich layer-structured Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 by integration with spinel LiNi 0.5 Mn 1.5 O 4

Li-rich layered Li 1+x MnyM 1-x-y O 2 (or denoted xLi 2 MnO 3 center dot 1-x LiMO 2 , M = Ni, Co, Mn, etc.) are promising cathode materials for high energy-density Li-ion batteries. However, their commercial applications suffer from problems such as a drop in the capacity and discharge voltage during cycling. In this work, the cycling performance of a layered oxide Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 is improved by integration with spinel LiNi 0.5 Mn 1.5 O 4 to obtain a layered-spinel composite. Characterization by powder X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) as well as cyclic voltammetry (CV) indicates that delayed degradation of layered Li 2 MnO 3 and the suppressed growth of LiMn 2 O 4 -like spinel are responsible for the performance improvement.

36 MATERIALS SCIENCE↗

Insight into the Atomic Structure of High-Voltage Spinel LiNi 0.5 Mn 1.5 O 4 Cathode Material in the First Cycle

Application of high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode material is the closest and the most realistic approach to meeting the midterm goal of lithium-ion batteries for electric vehicles (EVs) and plug-in hybrid electric vehicles (HEVs). However, this application has been hampered by long-standing issues, such as capacity degradation and poor first-cycle Coulombic efficiency of LiNi 0.5 Mn 1.5 O 4 cathode material. Although it is well-known that the structure of LiNi 0.5 Mn 1.5 O 4 into which Li ions are reversibly intercalated plays a critical role in the above issues, performance degradation related to structural changes, particularly in the first cycle, are not fully understood. Here, we report detailed investigations of local atomic-level and average structure of LiNi 0.5 Mn 1.5 O 4 during first cycle (3.5–4.9 V) at room temperature. We observed two types of local atomic-level migration of transition metals (TM) ions in the cathode of a well-prepared LiNi 0.5 Mn 1.5 O 4 //Li half-cell during first charge via an aberration-corrected scanning transmission electron microscopy (STEM). Surface regions (~2 nm) of the cycled LiNi 0.5 Mn 1.5 O 4 particles show migration of TM ions into tetrahedral Li sites to form a Mn 3 O 4 -like structure. However, subsurface regions of the cycled particles exhibit migration of TM ions into empty octahedral sites to form a rocksalt-like structure. The migration of these TM ions are closely related to dissolution of Ni/Mn ions and building-up of charge transfer impedance, which contribute significantly to the capacity degradation and the poor first-cycle Coulombic efficiency of spinel LiNi 0.5 Mn 1.5 O 4 cathode material. Accordingly, we provide suggestions of effective stabilization of LiNi 0.5 Mn 1.5 O 4 structure to obtain better electrochemical performance.

25 ENERGY STORAGE↗

Tuning charge-discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries

For LiMO 2 (M=Co, Ni, Mn) cathode materials, lattice parameters, a(b), contract during charge. Here we report such changes in opposite directions for lithium molybdenum trioxide (Li 2 MoO 3 ). A ‘unit cell breathing’ mechanism is proposed based on crystal and electronic structural changes of transition metal oxides during charge-discharge. Metal–metal bonding is used to explain such ‘abnormal’ behaviour and a generalized hypothesis is developed. The expansion of the metal-metal bond becomes the controlling factor for a(b) evolution during charge, in contrast to the shrinking metal-oxygen bond as controlling factor in ‘normal’ materials. The cation mixing caused by migration of molybdenum ions at higher oxidation state provides the benefits of reducing the c expansion range in the early stage of charging and suppressing the structure collapse at high voltage charge. These results may open a new strategy for designing layered cathode materials for high energy density lithium-ion batteries.

Zhou, Yong-Ning↗

Topology breaking of the vortex in multiferroic Y{sub 0.67}Lu{sub 0.33}MnO{sub 3}

Although topological defects, such as domain walls (DWs) or vortices, are naturally protected by topological invariance, yet, we discover an exception that the six-state topology of the vortex with Z2 × Z3 symmetry is broken by a partial edge dislocation (PED) in hexagonal Y{sub 0.67}Lu{sub 0.33}MnO{sub 3}, where the topologies of the four-state vortex or closed DWs emerges. Using aberration-corrected scanning transmission electron microscopy, we found that the PED plays an important role in changing the phase of translation domain. The PED at the vortex core leads to the formation of the four-state vortex, while the ones at closed DWs connect different types of DWs, both corresponding to continuous phase changes. These results indicate that PEDs can change the topology of translation-related domain vortices and more vortices with even domains can be expected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelectric transport and quantum interference effect in ultrathin manganite films

The magnetoelectric transport behavior with respect to the thicknesses of ultrathin La{sub 0.9}Sr{sub 0.1}MnO{sub 3} films is investigated in detail. The metal-insulator phase transition, which has never been observed in bulk La{sub 0.9}Sr{sub 0.1}MnO{sub 3}, is found in ultrathin films with thicknesses larger than 6 unit cells. Low-temperature resistivity minima appeared in films with thicknesses less than 10 unit cells. This is attributed to the presence of quantum interference effects. These data suggest that the influence of the weak localization becomes much pronounced as the film thickness decreases from 16 to 8 unit cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TiN/VN composites with core/shell structure for supercapacitors

Research highlights: {yields} Vanadium and titanium nitride nanocomposite with core-shell structure was prepared. {yields} TiN/VN composites with different V:Ti molar ratios were obtained. {yields} TiN/VN composites can provide promising electronic conductivity and favorable capacity storage. -- Abstract: TiN/VN core-shell composites are prepared by a two-step strategy involving coating of commercial TiN nanoparticles with V{sub 2}O{sub 5}.nH{sub 2}O sols followed by ammonia reduction. The highest specific capacitance of 170 F g{sup -1} is obtained when scanned at 2 mV s{sup -1} and a promising rate capacity performance is maintained at higher voltage sweep rates. These results indicate that these composites with good electronic conductivity can deliver a favorable capacity performance.

36 MATERIALS SCIENCE↗