Search NASA⌕ Search

Engineering topics

Guo, Wei

Publications and source records attributed to Guo, Wei.

At least 73 records · Page 4

Directly Linking Low-Angle Grain Boundary Misorientation to Device Functionality for GaAs Grown on Flexible Metal Substrates

A new growth method to make highly oriented GaAs thin films on flexible metal substrates has been developed, enabling roll-to-roll manufacturing of flexible semiconductor devices. The grains are oriented in the <001> direction with <1 degree misorientations between them, and they have a comparable mobility to single-crystalline GaAs at high doping concentrations. At the moment, the role of low-angle grain boundaries (LAGBs) on device performance is unknown. A series of electron backscatter diffraction (EBSD) and cathodoluminesence (CL) studies reveal that increased doping concentrations decrease the grain size and increase the LAGB misorientation. Cross-sectional scanning transmission electron microscopy (STEM) reveals the complex dislocation structures within LAGBs. Most importantly, a correlative EBSD/electron beam-induced current (EBIC) experiment reveals that LAGBs are carrier recombination centers and that the magnitude of recombination is dependent on the degree of misorientation. The presented results directly link increased LAGB misorientation to degraded device performance, and therefore, strategies to reduce LAGB misorientations and densities would improve highly oriented semiconductor devices.

36 MATERIALS SCIENCE↗

Radiation response of a Fe–20Cr–25Ni austenitic stainless steel under Fe 2+ irradiation at 500 °C

The radiation response of a Fe–20Cr–25Ni austenitic stainless steel under self-ion irradiation at 500 °C was systematically investigated. The steel was irradiated at 500 °C by 3.5 MeV Fe 2+ ions to 10, 50, and 150 peak dpa, respectively. In the 200–400 nm depth region, radiation-induced Frank loops were relatively stable in both size and number density from 10 to 150 peak dpa. Anisotropic distribution of Frank loops was observed in the 50 and 150 peak dpa specimens, possibly due to interaction of Frank loops and network dislocations with preferred orientations. Coarse voids were found only in the 50 and 150 peak dpa specimens in depths less than 750 nm, suggesting that injected interstitials at deeper regions suppressed the void nucleation. The peak swelling was very low (~0.4%) for both 50 and 150 peak dpa irradiation. Radiation also led to the formation of intragranular plate-like Cr-rich carbides. Radiation-induced segregation of Ni and Si was found at various sinks: dislocation loops, void surfaces, and carbide-matrix interfaces. Finally, irradiation hardening was measured by nanoindentation and the results are consistent with microstructure-based calculations using the dispersed barrier hardening model. The major contributor to irradiation hardening changed from Frank loops at the lowest dose to network dislocations at the highest dose.

dislocation loops↗

A succinct strategy for construction of nanoporous ionic organic networks from a pyrylium intermediate

Hydroxyl group and pyridinium salt-bifunctionalized nanoporous ionic organic networks prepared via a simple two-step strategy under metal- and template-free conditions are presented. Additionally, the structural features of the resultant polymer (e.g. high surface area, abundant hydroxyl groups and ionic functionalities) made it a promising candidate as an efficient scavenger of toxic oxo-anions from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Highly Purified Boron Nitride to Boron Nitride-Based Heterostructures: An Inorganic Precursor-Based Strategy

The current approaches used to fabricate hexagonal boron nitrides (h-BN) from boron trioxide and urea always results in contamination of the h-BN product with carbon/oxygen. Thus, discovering a facile way of mass producing high-purity h-BN remains a challenge. A simple yet highly efficient thermal treatment approach to large-scale fabrication of nanoporous h-BN with high yield, high purity, and high crystallinity is described using NaNH 2 and NaBH 4 as the oxygen- and carbon-free precursors. The unique properties of inorganic metal salts, i.e., high melting point and strong electrostatic interaction with carbon substrates, render this strategy suitable for the production of homogeneous h-BN/mesoporous carbon and h-BN/carbon nanotube heterostructures of high crystallinity, high h-BN dispersity, and with a strong interfacial effect. Therefore, these unique features make them promising candidates for supercapacitor applications, resulting a significantly enhanced specific capacitance. This study provides new insight into the fabrication of high-purity h-BN and h-BN-based heterostructures thus expanding their application in the field of energy storage and transformation.

36 MATERIALS SCIENCE↗

Enhancing Operational Performance and Productivity Benefits by Implementing Smart Manufacturing Technologies in Breweries

This paper uses case studies to demonstrate the potential of smart manufacturing (SM) and Internet of Things (IoT) technologies to enhance operational performance and productivity in the industry. The analysis highlights benefits like cost reduction, production flexibility, shorter product times-to-market, energy/water efficiency and environmental impact reduction, and increased productivity. To illustrate the effectiveness of SM and IoT approaches, the authors sought out manufacturers currently implementing or seeking to implement SM & IoT technologies. The authors identified beer brewing (NAICS Code —312120) as a rapidly expanding industry whose members appear eager to implement SM technologies to optimize production lines by revealing bottlenecks and identifying performance-reducing nodes. The paper presents two case studies based on SM and IoT technologies in breweries. It briefly describes a systematic framework introduced elsewhere by the authors and uses it to assess the energy productivity and competitiveness of SM applications in breweries. The paper addresses questions concerning the information and communications technology infrastructure needed to build smart breweries, and how corporations simplify the installation and deployment of SM and IoT components.

Nimbalkar, Sachin U.↗

Innovative Energy Management Strategies and Solutions—What We Have Learned from Leaders

The main objective of this paper is to share and replicate innovative energy management practices and energy efficiency technology solutions that the US Department of Energy (DOE) learned from its industrial partners through the Better Plants Program. The DOE Better Plants program provides partners with technical support, recognition opportunities, and networking platforms. It offers multiple awards and events to recognize partners for outstanding accomplishments in industrial energy and water efficiency. The Better Project and Better Practice awards recognize partners for innovative and replicable energy efficiency projects and energy management practices that address one or more prevailing industrial energy efficiency challenges.This paper summarizes the knowledge and lessons learned through award-winning projects and practices in 2017 and 2018. It provides information on the innovation, barriers overcome, magnitude of impact, project implementation strategy, and replicability. Details are presented for five case studies: Saint-Gobain’s wireless sub-metering, Quad Graphics’ baseload reduction, 3M’s annual energy communication plan, TE Connectivity’s center of excellence, and ArcelorMittal’s energy management toolbox.

Wenning, Thomas↗

US DOE In-Plant Trainings to Develop Expertise and Replicate Success

In-Plant Trainings (INPLTs) offered by the US Department of Energy Better Buildings, Better Plants (Better Plants) program are multi-day workshops performed by industry-recognized experts. INPLTs include both classroom- and field-based sessions that train attendees to identify energy conservation opportunities, quantify savings from these opportunities, and implement projects to realize the savings. These training workshops enhance the attendees’ understanding of working principles, knowledge of best practices, and capability to analyze the energy performance of industrial energy systems. INPLTs are competitively awarded and focus on a wide range of topics, including traditional industrial systems such as steam, process heating and motor-driven systems, and processes such as energy treasure hunts and municipal water and wastewater treatment. Partners that are awarded INPLTs can invite external stakeholders, such as employees of other manufacturers, utility representatives, and vendors. The Better Plants program had delivered 123 INPLTs as of spring 2019, trained more than 2,000 participants, and identified more than $37 million in energy cost savings. This paper provides an overview of INPLTs, some key statistics, the top identified energy savings opportunities, and success stories from INPLTs delivered from 2011 to 2018. Finally, the vision for future INPLTs is discussed based on participants’ feedback and the long-term and strategic goals of the Better Plants program.

Guo, Wei↗

Topotactic Synthesis of Phosphabenzene-Functionalized Porous Organic Polymers: Efficient Ligands in CO 2 Conversion

Progress toward the preparation of porous organic polymers (POPs) with task-specific functionalities has been exceedingly slow—especially where polymers containing low-oxidation phosphorus in the structure are concerned. In this work, a two-step topotactic pathway for the preparation of phosphabenzene-based POPs (Phos-POPs) under metal-free conditions is reported, without the use of unstable phosphorus-based monomers. The synthetic route allows additional functionalities to be introduced into the porous polymer framework with ease. As an example, partially fluorinated Phos-POPs (F-Phos-POPs) were obtained with a surface area of up to 591 m 2 g –1 . After coordination with Ru species, a Ru/F-Phos-POPs catalyst exhibited high catalytic efficiency in the formylation of amines (turnover frequency up to 204 h –1 ) using a CO 2 /H 2 mixture, in comparison with the non-fluorinated analogue (43 h –1 ) and a Au/TiO 2 heterogeneous catalysts reported previously (<44 h –1 ). This work describes a practical method for synthesis of porous organic phosphorus-based polymers with applications in transition-metal-based heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of fluorination on CO 2 adsorption in materials derived from fluorinated covalent triazine framework precursors

Ultra-nanoporous materials derived from fluorinated covalent triazine frameworks (CTFs) have been developed for highly efficient CO 2 capture. A CO 2 uptake capacity of 6.58 mmol g –1 at 273 K, 1 bar (2.45 mmol g –1 at 0.15 bar) is achieved. The excellent performance is due to the presence of ultra-micropores (0.6–0.7 nm) that tightly fit CO 2 and strong electrostatic interactions from the residual fluorine atoms within the framework. Here, both molecular simulation and deep learning study predict that CTFs with a F content of ~4.8 wt% and pore size distribution around ~0.7 nm can give rise to the highest CO 2 uptake capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selenium Nanocomposite Cathode with Long Cycle Life for Rechargeable Lithium‐Selenium Batteries

Abstract Selenium (Se) is a potential cathode material for high energy density rechargeable lithium batteries. In this study, a binder‐free Se‐carbon nanotube (CNT) composite electrode has been prepared by a facile chemical method. At initial state, Se is present in the form of branched nanowires with a diameter of <150 nm and a length of 1–2 μm, interwoven with CNTs. After discharge and re‐charge, the Se nanowires are converted to nanoparticles embedded in the CNT network. This synthesis method provides a path for fabricating the Se cathodes with controllable mass loading and thickness. By studying the composite electrodes with different Se loading and thickness, we found that the electrode thickness has a critical impact on the distribution of Se during repeated cycling. Promising cycling performance was achieved in thin electrodes with high Se loading. The composite electrode with 23 μm thickness and 60 % Se loading shows a high initial capacity of 537 mAh g −1 and stable cycling performance with a capacity of 401 mAh g −1 after 500 cycles at 1 C rate. This study reports a synthesis strategy to obtain Se/CNT composite cathode with long cycle life for rechargeable Li−Se batteries.

Cui, Yi↗

Quench-Spot Detection for Superconducting Accelerator Cavities Via Flow Visualization in Superfluid Helium-4

Superconducting radio-frequency (SRF) cavities, cooled by superfluid helium-4 (He II), are key components in modern particle accelerators. Quenches in SRF cavities caused by Joule heating from local surface defects can severely limit the maximum achievable accelerating field. Existing methods for quench-spot detection include temperature mapping and second-sound triangulation. These methods are useful but also have known limitations. Here we describe an alternative method for surface quench-spot detection by visualizing the heat transfer in He II via tracking He2 molecular tracer lines. A proof-of-concept experiment is conducted, in which a miniature heater mounted on a plate is pulsed on to simulate a surface quench spot. A He2 tracer line created nearby the heater deforms due to the counterflow heat transfer in He II. By analyzing the tracer-line deformation, we well reproduce the heater location within a few hundred microns, which clearly demonstrates the feasibility of this alternative technology. Our analysis also reveals that the heat content transported in He II is only a small fraction of the total input heat energy. We show that the remaining energy is essentially consumed in the formation of a cavitation zone near the heater. By estimating the size of this cavitation zone, we discuss how the existence of the cavitation zone may explain a decades-long puzzle observed in many past second-sound triangulation experiments.

43 PARTICLE ACCELERATORS↗

Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability

A high density of grain boundaries can potentially increase structural materials' strength, but at the expense of losing the materials' strain hardening ability at high flow stress levels. However, endowing materials with grain size gradients and a high density of internal interfaces can simultaneously increase the strength and strain hardening ability. This applies particularly for through-thickness gradients of nanoscale interface structures. In this work, we apply a machining method that produces metals with nanoscale interface gradients. Conventional bulk plastic deformation such as rolling, a process applied annually to about 2 billion tons of material, aims to reduce the metal thickness. We have modified this process by introducing severe strain path changes, realized by leading the sheet through a U-turn while preserving its shape, an approach known as ‘hard turning’. Furthermore, we applied this process at both room temperature and 77 K to a NiCrCo medium entropy alloy. Micropillar compression was conducted to evaluate the mechanical response. After hard turning at room temperature, the surface microstructure obtained a ~50% increase in yield stress (0.9 GPa) over the original state with homogeneous grain size (0.4 GPa), but the initial strain hardening rate did not show significant improvement. However, after hard turning at 77 k, the gradient nanolaminate structure tripled in yield stress and more than doubled its initial strain hardening rate. The improvements were achieved by introducing a specific microstructure that consists of gradient nanolaminates in the form of nanospaced twins and martensite in the face center cubic (fcc) phase. This microstructure was formed only at cryogenic temperature. It was found after turning at room temperature that only nanospaced twins were present in the fcc phase inside nanolaminates that had formed at the surface. The origin of the enhanced strain hardening mechanism was studied. Joint density functional theory (DFT) and axial next nearest neighbor Ising (ANNNI) models were used to explain the temperature-dependent phase formation of the NiCrCo nanolaminate at the surface of the hard-turned material.

36 MATERIALS SCIENCE↗

Photo-induced ultrafast active ion transport through graphene oxide membranes

Layered graphene oxide membranes (GOM) with densely packed sub-nanometer-wide lamellar channels show exceptional ionic and molecular transport properties. Mass and charge transport in existing materials follows their concentration gradient, whereas attaining anti-gradient transport, also called active transport, remains a great challenge. Here, we demonstrate a coupled photon-electron-ion transport phenomenon through the GOM. Upon asymmetric light illumination, cations are able to move thermodynamically uphill over a broad range of concentrations, at rates much faster than that via simple diffusion. We propose, as a plausible mechanism, that light irradiation reduces the local electric potential on the GOM following a carrier diffusion mechanism. When the illumination is applied to an off-center position, an electric potential difference is built that can drive the transport of ionic species. We further develop photonic ion switches, photonic ion diodes, and photonic ion transistors as the fundamental elements for active ion sieving and artificial photosynthesis on synthetic nanofluidic circuits.

42 ENGINEERING↗

Cascading microstructures in aluminum-steel interfaces created by impact welding

With the rising need to develop light weight structures joining dissimilar metals is inevitable. Thus a fundamental understanding of the microstructure evolution and bond formation mechanism is necessary. In this work we probe the welded interface in aluminum and steel joined using vaporizing foil actuator welding (VFAW) a novel impact welding process. The goal of such a detailed characterization campaign is to understand the bond formation mechanism. The study demonstrates that the interfacial microstructure has a pronounced hierarchical nature. At the macro scale, the interface is characterized by a wavy interface which is a result of extensive plastic deformation that accompanies the process. Detailed transmission electron microscopy shows evidence for the formation of a liquid film at the interface resulting in significant inter diffusion of Fe. The solidified structure at the interface consisted of crystalline α-Al and an amorphous metastable Al-Fe intermetallic compound similar to the observations in rapid solidification of Al-Fe alloys. The sub-nm scale characterization of the interface using atom probe tomography showed two distinct zones 1. A magnesium (5 at.%) and oxygen (15 at.%) rich (not detectable using energy dispersive spectroscopy) which was probably from the decomposition of the surface oxide film 2. The rapidly solidified reaction zone consisting of primary crystalline α-Al and an amorphous Al-Fe (15 at.%)-O (0.5 at.%)-Si (1.5 at.%).Based on these observations a mechanism for the bond formation is presented.

36 MATERIALS SCIENCE↗