Search NASA⌕ Search

Engineering topics

Guo, Wei

Publications and source records attributed to Guo, Wei.

At least 91 records · Page 5

Characterizing vortex tangle properties in steady-state He II counterflow using particle tracking velocimetry

Historically, there has been little faith in particle tracking velocimetry (PTV) as a tool to make quantitative measurements of thermal counterflow in He II, since tracer particle motion is complicated by influences from the normal fluid, superfluid, and quantized vortex lines, or a combination thereof. Recently, we introduced a scheme for differentiating particles trapped on vortices (G1) from particles entrained by the normal fluid (G2). In this paper, we apply this scheme to demonstrate the utility of PTV for quantitative measurements of vortex dynamics in He II counterflow.We estimate Ι, the mean vortex line spacing, using G2 velocity data, and c 2 , a parameter related to the mean curvature radius of vortices and energy dissipation in quantum turbulence, using G1 velocity data. We find that both estimations show good agreement with existing measurements that were obtained using traditional experimental methods. This is of particular consequence since these parameters likely vary in space, and PTV offers the advantage of spatial resolution. Furthermore, we also show a direct link between power-law tails in transverse particle velocity probability density functions (PDFs) and reconnection of vortex lines on which G1 particles are trapped.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A New Methodology for Calculating The Energy Performance of Manufacturing Facilities

Total energy comparison (TEC), classic energy intensity (CEI), and linear regression models (LRM) are the three most common approaches used to track the energy performance of manufacturing facilities. TEC simply compares the total energy consumption from utility bills. TEC is rarely used because it does not consider the variation of any factors that may affect energy consumption. One step better, CEI considers the variation of production rates by using the ratio of annual total energy consumption over annual total production. However, CEI fundamentally assumes that energy consumption is zero if the production rate is zero. This is almost never true and can cause significant errors. Using linear regression models, LRM considers the impact of multiple variables and, therefore, most accurately tracks energy performance. Unfortunately, because of the lack of either required data or technical expertise, some facilities cannot create valid linear regression models. For these cases, CEI is the only option. Here, the goal of this article is to develop a new methodology, modified energy intensity (MEI), which is more accurate than CEI, but requires much less data and is easier to implement than LRM. Using the underlying principle of LRM, this article first outlines the mathematical derivation of the equations for MEI, then explains them from an engineering perspective. Finally, the implementation of MEI is discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

US DOE Better Plants Program Energy Treasure Hunt Exchange Toolkit

The US Department of Energy’s (DOE’s) Better Buildings, Better Plants Program works with manufacturing companies to improve their facilities’ energy efficiency. By partnering with the program, companies commit to long-term energy efficiency goals, typically 25% energy savings in 10 years. The program provides technical support to help partners obtain their goals and recognizes partners’ outstanding achievements. One of the technical support offerings from the program is the Energy Treasure Hunt Exchange In-Plant Training. The Treasure Hunt Exchange is an adaptation of the Kaizen methodology for energy efficiency originally developed by Toyota. DOE developed the Energy Treasure Hunt Exchange Toolkit to facilitate program partners’ execution of the energy treasure hunt processes. The toolkit covers three phases of an energy treasure hunt for all major energy systems: pump systems, fan systems, process heating systems, process cooling systems, steam systems, compressed air systems, lighting systems, and motor systems. All the tools included in the toolkit can be downloaded from the DOE website. The purpose of this report is to provide Better Plants partners an overview of the toolkit and detailed descriptions of its capabilities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Molecular Tagging Velocimetry in Superfluid Helium-4: Progress, Issues, and Future Development

Helium-4 in the superfluid phase (He II) is a two-fluid system that exhibits fascinating quantum hydrodynamics with important scientific and engineering applications. However, the lack of high-precision flow measurement tools in He II has impeded the progress in understanding and utilizing its hydrodynamics. In recent years, there have been extensive efforts in developing quantitative flow visualization techniques applicable to He II. In particular, a powerful molecular tagging velocimetry (MTV) technique, based on tracking thin lines of He 2 * excimer molecules created via femtosecond laser-field ionization in helium, has been developed in our laboratory. This technique allows unambiguous measurement of the normal fluid velocity field in the two-fluid system. Nevertheless, there are two limitations to this technique: (1) only the velocity component perpendicular to the tracer line can be measured; and (2) there is an inherent error in determining the perpendicular velocity. In this paper, we discuss how these issues can be resolved by advancing the MTV technique. We also discuss two novel schemes for tagging and producing He 2 * tracers. Here, the first method allows the creation of a tagged He 2 * tracer line without the use of an expensive femtosecond laser. The second method enables full-space velocity field measurement through tracking small clouds of He 2 * molecules created via neutron- 3 He absorption reactions in He II.

47 OTHER INSTRUMENTATION↗

Hot Straining and Quenching and Partitioning of a TRIP-Assisted Steel: Microstructural Characterization and Mechanical Properties

Advanced high strength steels (AHSS), with yield strengths over 300 MPa and tensile strengths exceeding 600 MPa, are becoming more noticeable in vehicle manufacturing. A novel processing route of a TRIP-assisted steel was developed. Characterization and modelling techniques were used to establish correlations between processing, microstructure and mechanical properties. Quenching and partitioning (Q&P) and a novel process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble ®3S50 thermo-mechanical simulator. The heat treatments involved intercritical annealing at 800 oC and a two-step Q&P heat treatment with a partitioning time of 100 s at 400 oC. The effects of high-temperature isothermal deformation on the carbon enrichment of austenite, carbide formation and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples it was slightly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the SIT phenomenon. By APT, the carbon accumulation at austenite/martensite interface was clearly observed. The newly developed combined process is promising as the transformation induced plasticity can contribute to the formability and energy absorption, contributing to fill the gap of the third generation of high-strength steels.

Ariza, Edwan Anderson↗

Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility

A single phase, face-centered-cubic (FCC) Al 0.3 CoCrFeNi high entropy alloy usually has low yield strength. Here, a precipitate-strengthened Al 0.3 CoCrFeNi has been developed, exhibiting enhanced yield strength while retaining good ductility, which is attributed to a novel microstructure comprising a finely distributed, needle-like B2 phase within the grains of the FCC matrix and a granular σ phase along the grain boundaries. Such a microstructure was obtained by a two-step heat treatment of an as-cast Al 0.3 CoCrFeNi, whose parameters were determined by integrating CALPHAD-based thermodynamic calculations with microstructural characterization by atom probe tomography. In situ neutron diffraction, in conjunction with crystal-plasticity finite-element simulations, has revealed the strengthening effect owing to the load partitioning between the constituent phases. Here, this work has important implications for understanding phase stability and deformation mechanisms in multi-principal component alloys, and paves the way for developing novel microstructures in complex alloys using correlative techniques.

36 MATERIALS SCIENCE↗

Enhanced strength and ductility of a tungsten-doped CoCrNi medium-entropy alloy

Developing metallic materials with a good combination of strength and ductility has been an unending pursuit of materials scientists. The emergence of high/medium-entropy alloys (HEA/MEA) provided a novel strategy to achieve this. In this work, we also strengthened a strong-and-ductile MEA using a traditional solid solution strengthening theory. The selection of solute elements was assisted by mechanical property and microstructure predictive models. Extensive microstructural characterizations and mechanical tests were performed to verify the models and to understand the mechanical behavior and deformation mechanisms of the designated CoCrNi–3W alloy. Our results show good experiment-model agreement. The incorporation of 3 at.% W into the ternary CoCrNi matrix increased its intrinsic strength by ~20%. External strengthening through microstructural refinement led to a yield strength nearly double that of the parent alloy, CoCrNi. The increase in strength is obtained with still good ductility when tested down to 77 K. Nanoscale twin boundaries are observed in the post-fracture microstructure under 77 K. Finally, the combination of strength and ductility after W additions deviate from the traditional strength-ductility-trade-off contour.

36 MATERIALS SCIENCE↗

Surface‐Confined Fabrication of Ultrathin Nickel Cobalt‐Layered Double Hydroxide Nanosheets for High‐Performance Supercapacitors

Abstract The design and fabrication of 2D nanostructure electrodes with desired electrochemical activities is highly demanded for electrocatalysis and supercapacitors. Herein, the tuned fabrication of ultrathin and tortuous nickel/cobalt‐layered double hydroxide (NiCo‐LDH) nanosheets via a graphene oxide (GO) surface‐confined strategy is reported, yielding nanosheets with a thickness of 1.7–1.8 nm that is duplicated from the graphene oxides in terms of both the lateral size and the shape. It has been found that the C/O functional groups on the GO surface have functioned to promote the oxidation of Co 2+ to Co 3+ , and to transform the β‐phase NiCo‐hydroxide (NiCo‐OH) into the LDH‐phase with tuned homogenous composition and geometry. The ultrathin NiCo‐LDH nanosheets mimic the morphology and size of the graphene due to the surface‐confined and/or surface‐guided growth. The as‐obtained NiCo‐LDH‐graphene (NiCo‐LDH‐G) nanosheets exhibit a superior electrocatalytic activity for oxygen evolution reaction, evidenced by a small overpotential of 0.337 V (@10 mA cm −2 in 0.1 m KOH electrolyte), and a high charge storage capability of 1489 F g −1 as electrodes for supercapacitors. This 2D surface‐confined growth strategy may pave a way for the fabrication of ultrathin 2D materials including but not limited to transition metal hydroxides for high‐performance electrochemical applications.

Yang, Juan↗

Carbon Clustering in Low-Temperature Bainite

The bainitic ferrite phase formed at temperatures below 573 K (300 °C) in high-carbon high-silicon steels holds an amount of carbon well above that expected from the thermodynamic paraequilibrium with austenite. Diffraction experiments have shown that the ferrite lattice is sufficiently Zener-ordered to possess a tetragonal symmetry, which allows the structures to be supersaturated in carbon. It could be expected that carbon undergoes ordering beyond that indicated by the Zener-ordering temperature as in the early stages of tempering of Fe-based martensites. Here, this study examines the formation of cluster arrangements of carbon within bainitic ferrite and their relationship to the tetragonal distortion.

36 MATERIALS SCIENCE↗

Lattice distortion in a strong and ductile refractory high-entropy alloy

Here, the maximization of the mixing entropy with the optimal range of enthalpy in high-entropy alloys (HEAs) can promote the formation of a stable single solid-solution phase with the absence of competing intermetallic compounds. The resultant effects, such as lattice distortion, can contribute to excellent mechanical properties, which has motivated numerous efforts to develop and design single-phase HEAs. However, challenges still remain, particularly on quantifying the lattice distortion and relating it to materials properties. In this study, we have developed a NbTaTiV refractory HEA with a single body-centered-cubic (BCC) structure using an integrated experimental and theoretical approach. The theoretical efforts include thermodynamic modeling, i.e., CALculation of PHAse Diagram (CALPHAD). The microstructural evolutions have been investigated by systematic heat-treatment processes. The typical dendrite microstructure was observed, which is caused by the elemental segregation during the solidification in the as-cast condition. The structural inhomogeneity and chemical segregation were completely eliminated by the proper homogenization treatment at 1200 °C for 3 days. The homogeneous elemental distribution was quantitatively verified by the Atom Probe Tomography (APT) technique. Importantly, results indicate that this HEA exhibits the high yield strength and ductility at both room and high temperatures (up to 900 °C). Furthermore, the effects of the high mixing entropy on the mechanical properties are discussed and quantified in terms of lattice distortions and interatomic interactions of the NbTaTiV HEA via first-principles calculations. It is found that the local severe lattice distortions are induced, due to the atomic interactions and atomic-size mismatch in the homogenization-treated NbTaTiV refractory HEA.

36 MATERIALS SCIENCE↗

Comparison of One- and Two-Variable Linear Regression Models and Classic Energy Intensity for Energy Performance Tracking of Two Manufacturing Sectors

We report manufacturing facilities consumed about 32% of total domestic energy in the United States in 2016. To evaluate the energy savings achieved through the implementation of energy conservation projects and to establish powerful arguments for future projects, accurate energy performance tracking methods are necessary. The classic energy intensity method (i.e., the ratio of annual total energy over annual total production) is the means most widely used to measure savings because it can be understood and calculated easily. This method considers the variation in production rates to some extent; however, it fundamentally assumes facilities' base energy consumption (energy consumption at zero production) to be zero, which rarely holds true. Furthermore, this method does not consider variations in other relevant parameters, such as weather conditions. Therefore, the regression models approach is commonly recommended to track energy performance improvements. However, because it requires more data and statistical expertise, the regression models approach has been adopted by only a few facilities, and many others suspect it is not worth the effort for their specific cases. For this reason, the improved accuracy this approach offers needs to be demonstrated. By analyzing 477 monthly energy (electricity and natural gas) data sets, this study quantitatively compared the accuracy of classic energy intensity, one-variable (production only) linear regression models, and two-variable (i.e., production and weather) linear regression models for two manufacturing sectors (primary metal and transportation equipment manufacturing). Results showed that significant improvements in accuracy were achieved with one-variable regression models when compared with the classic energy intensity method and with two-variable regression models when compared with one-variable regression models. These improvements were demonstrated using the p values of intercept, cooling degree days, and heating degree days. Based on these results, to achieve a good balance between accuracy improvements and resources requirements, one-variable (production only) linear regression models for electricity consumption and two-variable (production and heating degree days) linear regression models for natural gas consumption are recommended for both sectors in the case of limited resources. Lastly, facilities can also use the results to decide which approaches fit better in their cases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Differential responses of carbon‐degrading enzyme activities to warming: Implications for soil respiration

Abstract Extracellular enzymes catalyze rate‐limiting steps in soil organic matter decomposition, and their activities (EEAs) play a key role in determining soil respiration (SR). Both EEAs and SR are highly sensitive to temperature, but their responses to climate warming remain poorly understood. Here, we present a meta‐analysis on the response of soil cellulase and ligninase activities and SR to warming, synthesizing data from 56 studies. We found that warming significantly enhanced ligninase activity by 21.4% but had no effect on cellulase activity. Increases in ligninase activity were positively correlated with changes in SR, while no such relationship was found for cellulase. The warming response of ligninase activity was more closely related to the responses of SR than a wide range of environmental and experimental methodological factors. Furthermore, warming effects on ligninase activity increased with experiment duration. These results suggest that soil microorganisms sustain long‐term increases in SR with warming by gradually increasing the degradation of the recalcitrant carbon pool.

Chen, Ji↗

Isolating Clusters of Light Elements in Molecular Sieves with Atom Probe Tomography

Understanding the 3-D distribution and nature of active sites in heterogeneous catalysts is critical to developing structure–function relationships. However, this is difficult to achieve in microporous materials as there is little relative z-contrast between active and inactive framework elements (e.g., Al, O, P, and Si), making them difficult to differentiate with electron microscopies. We have applied atom probe tomography (APT), currently the only nanometer-scale 3-D microscopy to offer routine light element contrast, to the methanol-to-hydrocarbons (MTH) catalyst SAPO-34, with Si as the active site, which may be present in the framework as either isolated Si species or clusters (islands) of Si atoms. 29Si solid-state NMR data on isotopically enriched and natural abundance materials are consistent with the presence of Si islands, and the APT results have been complemented with simulations to show the smallest detectable cluster size as a function of instrument spatial resolution and detector efficiency. We have identified significant Si–Si affinity in the materials, as well as clustering of coke deposited by the MTH reaction (13CH3OH used) and an affinity between Brønsted acid sites and coke. A comparison with simulations shows that the ultimate spatial resolution that can be attained by APT applied to molecular sieves is 0.5–1 nm. Finally, the observed 13C clusters are consistent with hydrocarbon pool mechanism intermediates that are preferentially located in regions of increased Brønsted acidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels

In this study, quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Finally, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).

36 MATERIALS SCIENCE↗