Engineering topics

Gupta, A.

Publications and source records attributed to Gupta, A..

At least 55 records · Page 3

NASA NTRS1986

Electronic energy transfer and quenching in copolymers of styrene and 2-(2-prime-hydroxy -5-prime-vinylphenyl)-2H-benzotriazole Photochemical processes in polymeric systems. X

Intensity and lifetime quenching of the polystyrene monomer and excimer fluorescence emission by a pendant quencher have been studied in the solid state and in solution for a series of copolymers of styrene and 2-(2-prime-hydroxy-5-prime-vinylphenyl)-2H-benzotriazole. Two mechanisms of quenching have been identified. One involves interception of the migrating monomer excitation by the quencher, and the other involves a single-step Foerster energy-transfer process from the excimer traps to a quencher. The relative efficiencies of these two quenching mechanisms in the solid state and in solution have been compared and related to the efficiency of electronic energy migration. An estimate of the excimer trap concentration in solid polystyrene is also reported.

Coulter, D. R.↗

NASA NTRS1986

Laser Photoacoustic Technique Detects Photo-Oxidation

Laser photoacoustic instrument detects small amounts of oxidation in polymers. Instrument used to evaluate resistance to oxidation in Sunlight of polymer encapsulants for solar-cell arrays. With instrument, researchers monitor samples for early stages of photooxidation and study primary mechanisms of oxidation and degradation. Effects of these mechanisms masked during later stages.

Liange, R. H.↗

NASA NTRS1985

Direct observation of the excited-state proton transfer and decay kinetics of internally hydrogen-bonded photostabilizers in copolymer films

The excited-state dynamics of a 2-hydroxyphenylbenzotriazole (HPB) photostabilizer copolymerized with polystyrene are reported. HPB fluorescence from these copolymer films is observed at approximately 630 nm, characteristic of the proton-transferred excited state of HPB, and it has a risetime of less than 10 ps and a decay time of 28 + or - 4 ps at room temperature. Measurement of the relative fluorescence quantum yield as a function of temperature gives the activation energy for nonradiative decay of this state to be E/hc = 259 + or 25/cm.

Oconnor, D. B.↗

NASA NTRS1985

Nonyellowing Polycarbonate for Outdoor Use

Two-step photochemical process prevents yellowing of polycarbonate plastics. Use of polycarbonate plastics growing in windows, aircraft glazing, and streetlight globes. New photochemical process causes formation of stabilizers bound to polymer chains and therefore cannot be leached out.

Gupta, A.↗

NASA NTRS1984

Free Volume Considerations in Thermoplastic and Thermosetting Resins

The direct measurement of physical aging and of the volume changes which go on during the course of this aging is discussed. Data on PMMA showing its physical aging as measured by its stress relaxation response and the accompanying volume changes are presented. An indication of how one can measure the free volume both directly from the volume change itself and relatively directly via a new technique is given. The application of this new technique (electron spin resonance spectroscopy) to other polymer systems is demonstrated.

Landel, R. F.↗

NASA NTRS1984

Morphology and Dynamic Mechanical Properties of Diglycidyl Ether of Bisphenol-A Toughened with Carboxyl-Terminated Butadiene-Acrylonitrile

The fracture toughness of an incorporation of a carboxyl-terminated butadiene acrylonitrile (CTBN) elastomer in diglycidyl ether bisphenol A (DGEBA) resin was investigated. Measurements of dynamic mechanical properties, scanning electron microscopy and small-angle X-ray scattering were carried out to characterize the state of cure, morphology and particle size and size distribution of the neat resins and their graphite fiber reinforced composites.

Hong, S. D.↗

NASA NTRS1984

Estimating the Lifetimes of Nickel/Cadmium Cells

Equation based on model of flaw growth. Model assumes cell fails by growth of preexisting flaws. Flaws described by three important quantities: total number of flaws, distribution of flaw sizes and rate of flaw growth. When flaw reaches critical size failure occurs. Flaw concept, in addition to providing ready explanation for reduced lifetime, predicts two important charateristics: statistical variability of lifetime data and dependence of lifetime on volume of sample.

Fedors, R. F.↗

NASA NTRS1984

Accelerated Solar-UV Test Chamber

Medium-pressure mercury-vapor lamps provide high ratio of ultraviolet to total power. Chamber for evaluating solar-ultraviolet (UV) radiation damage permits accelerated testing without overheating test specimens.

Gupta, A.↗

NASA NTRS1983

Handbook of photothermal test data on encapsulant materials

Laboratory tests performed to characterize candidate encapsulation materials with respect to changes in their physical and chemical properties caused by photothermal aging are described. Several key material properties relating directly to material degradation and deterioration of performance were identified and were monitored as functions of aging conditions and time. A status report on accelerated testing activities is provided and experimental data are presented. It will be updated periodically as more data become available.

Liang, R. H.↗

NASA NTRS1983

Applications of ethylene vinyl acetate as an encapsulation material for terrestrial photovoltaic modules

Terrestrial photovoltaic modules must undergo substantial reductions in cost in order to become economically attractive as practical devices for large scale production of electricity. Part of the cost reductions must be realized by the encapsulation materials that are used to package, protect, and support the solar cells, electrical interconnects, and other ancillary components. As many of the encapsulation materials are polymeric, cost reductions necessitate the use of low cost polymers. The performance and status of ethylene vinyl acetate, a low cost polymer that is being investigated as an encapsulation material for terrestrial photovoltaic modules, are described.

Cuddihy, E. F.↗

NASA NTRS1983

Clear Film Protects Against Ultraviolet Radiation

Acrylic film contains screeing agent filtering ultraviolet radiation up to 380 nanometers in wavelength but passes other components of Sunlight. Film used to protect such materials as rubber and plastics degraded by ultraviolet light. Used as protective cover on outdoor sheets or pipes made of such materials as polyethylene or polypropylene and on solar cells.

Gupta, A.↗

NASA NTRS1983

ECUT: Energy Conversion and utilization Technologies program biocatalysis research activity. Generation of chemical intermediates by catalytic oxidative decarboxylation of dilute organic acids

A rhodium-based catalyst was prepared and preliminary experiments were completed where the catalyst appeared to decarboxylate dilute acids at concentrations of 1 to 10 vol%. Electron spin resonance spectroscoy was used to characterize the catalyst as a first step leading toward modeling and optimization of rhodium catalysts. Also, a hybrid chemical/biological process for the production of hydrocarbons has been assessed. These types of catalysts could greatly increase energy efficiency of this process.

Distefano, S.↗

NASA NTRS1983

Pulse radiolysis of epoxy-based matrix materials

Electron beam pulse radiolysis (600 KeV, 3 nsec) experiments have been carried out on epoxy-based matrix materials. Time and wavelength resolved emission and transient absorption techniques as well as ESR studies have been utilized to identify and monitor short lived reactive intermediates resulting from energetic electron impact. An energy deactivation model based on the results of this work has been developed. Recombination of primary charged species is found to be fast, resulting in the formation of longer lived excited electronic states and radicals which control the subsequent energy deactivation.

Coulter, D. R.↗

NASA NTRS1983

Photooxidative degradation of clear ultraviolet absorbing acrylic copolymer surfaces

Photodegradation of copolymer of methyl methacrylate and 2(2'-hydroxy 5'vinyl-phenyl) 2H-benzotriazole has been investigated in order to determine the changes in the chemical composition of the surface of the copolymer on photooxidation. An electronic energy transfer mechanism has been postulated in order to interpret the observed photochemical changes in the polymer. Preliminary examination of the photophysical properties of the chromophore provides support for such a mechanism.

Gupta, A.↗

NASA NTRS1983

Interaction of metal ions and amino acids - Possible mechanisms for the adsorption of amino acids on homoionic smectite clays

A semiempirical molecular orbital method is used to characterize the binding of amino acids to hexahydrated Cu(2+) and Ni(2+), a process presumed to occur when they are adsorbed in the interlamellar space of homoionic smectite clays. Five alpha-amino acids, beta-alanine, and gamma-aminobutyric acid were used to investigate the metal ion and amino acid specificity in binding. It was assumed that the alpha, beta, and gamma-amino acids would bind as bidentate anionic ligands, forming either 1:1 or 1:2 six-coordinated five, six, and seven-membered-ring chelate complexes, respectively. Energies of complex formation, optimized geometries, and electron and spin distribution were determined; and steric constraints of binding of the amino acids to the ion-exchanged cations in the interlamellar spacing of a clay were examined. Results indicate that hexahydrated Cu(2+) forms more stable complexes than hexahydrated Ni(2+) with all the amino acids studied. However, among these amino acids, complex formation does not favor the adsorption of the biological subset. Calculated energetics of complex formation and steric constraints are shown to predict that 1:1 rather than 1:2 metal-amino acid complexes are generally favored in the clay.

Gupta, A.↗

NASA NTRS1983

Fluorescence from polystyrene - Photochemical processes in polymeric systems, 7

Results are presented for measurements of the fluorescence spectra of polystyrene in dilute solution and in pure solid films. It is determined that a major potential source of experimental error is the concurrent photooxidative degradation in air which may obscure fluorescence emission from monomeric sites in solid films at 25 C. The fluorescence spectra of oriented films are evaluated in terms of the monomer to excimer fluorescence intensity ratio and the excimer 'red shift'. The monomer to excimer fluorescence intensity ratio is determined to be significantly higher in fluid solution than in solid film.

Gupta, M. C.↗

NASA NTRS1983

Photothermal degradation of ethylene/vinylacetate copolymer

Photothermal degradation studies were conducted on a 'stabilized' formulation of ethylene/vinyl acetate copolymer (EVA) in the temperature range 25-105 C under three different oxygen environments (in open air, with limited access to O2, and in a dark closed stagnant oven). These studies were performed in order to evaluate the utility of EVA as an encapsulation material for photovoltaic modules. Results showed that at low temperature (25 C), slow photooxidation of the polymer occurred via electronic energy transfer involving the UV absorber incorporated in the polymer. However, no changes in the physical properties of the bulk polymer were detected up to 1500 hours of irradiation. At elevated temperatures, leaching and evaporation of the additives occurred, which ultimately resulted in the chemical crosslinking of the copolymer and the formation of volatile photoproducts such as acetic acid.

Liang, R. H.↗

NASA NTRS1983

Polymers in solar energy utilization

A laser photoacoustic technique (LPAT) has been verified for performing accelerated life testing of outdoor photooxidation of polymeric materials used in solar energy applications. Samples of the material under test are placed in a chamber with a sensitive microphone, then exposed to chopped laser radiation. The sample absorbs the light and converts it to heat by a nonradiative deexcitation process, thereby reducing pressure fluctuations within the cell. The acoustic signal detected by the microphone is directly proportional to the amount of light absorbed by the specimen. Tests were performed with samples of ethylene/methylacrylate copolymer (EMA) reprecipitated from hot cyclohexane, compressed, and molded into thin (25-50 microns) films. The films were exposed outdoors and sampled by LPAT weekly. The linearity of the light absorbed with respect to the acoustic signal was verified.Correlations were established between the photoacoustic behavior of the materials aged outdoors and the same kinds of samples cooled and heated in a controlled environment reactor. The reactor tests were validated for predicting outdoor exosures up to 55 days.

Liang, R. H.↗