Search NASA⌕ Search

Engineering topics

Gupta, A.

Publications and source records attributed to Gupta, A..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Polymers in solar energy utilization

A laser photoacoustic technique (LPAT) has been verified for performing accelerated life testing of outdoor photooxidation of polymeric materials used in solar energy applications. Samples of the material under test are placed in a chamber with a sensitive microphone, then exposed to chopped laser radiation. The sample absorbs the light and converts it to heat by a nonradiative deexcitation process, thereby reducing pressure fluctuations within the cell. The acoustic signal detected by the microphone is directly proportional to the amount of light absorbed by the specimen. Tests were performed with samples of ethylene/methylacrylate copolymer (EMA) reprecipitated from hot cyclohexane, compressed, and molded into thin (25-50 microns) films. The films were exposed outdoors and sampled by LPAT weekly. The linearity of the light absorbed with respect to the acoustic signal was verified.Correlations were established between the photoacoustic behavior of the materials aged outdoors and the same kinds of samples cooled and heated in a controlled environment reactor. The reactor tests were validated for predicting outdoor exosures up to 55 days.

Liang, R. H.↗
NASA NTRS1983

Photochemical stability of UV-screening transparent acrylic copolymers of 2-(2-hydroxy-5-vinylphenyl)-2H-benzotriazole

The mechanism of photodegradation of certain hydroxyphenyl benzotriazole based ultraviolet absorbers has been investigated and a new polymerizable ultraviolet absorber in this group has been synthesized. The photoreactivity is entirely confined at the surface of polymethylmethacrylate films containing the ultraviolet absorbers as pendant groups. A mechanism involving sensitized photooxidation has been proposed to interpret the data.

Gupta, A.↗
NASA NTRS1983

Mechanism and kinetics of the curing process in a resin system

The present investigation is concerned with the development of a cure reactivity model for a resin system consisting of tetraglycidyl diaminodiphenyl methane (TGDDM) and diaminodiphenyl sulfone (DDS), taking into account the temperature range from 153 to 177 C. Differential scanning calorimetry and FT-IR spectroscopy have been used to investigate the cure kinetics of the resin with the objective to obtain a correlation between the total conversion and the rates of formation and disappearance of specific functionalities. It was found that the overall process can be satisfactorily described in terms of two first order processes.

Moacanin, J.↗
NASA NTRS1982

Prepolymer Syrup for Encapsulating Solar Cells

Clear polymer syrup, made by disolving n-butyl acrylate prepolymer in monomer, used to encapsulate solar cells by any of three standard processes (dipping, multiple coating, or automated machine coating). Use of cyclohexane instead of methanol/water solvent during initial polymerization stage maintains high molecular weight and raises yield of linear polymer to essentially 100 percent.

Gupta, A.↗
NASA NTRS1982

A failure model for sealed nickel-cadmium batteries

A model has been developed to describe failure in electrochemical batteries. The model is based on the concept of the existence and subsequent growth of flaws which ultimately lead to battery failure. This model provides, in a natural way, for the statistical variability of lifetime data. The model as applied to the Crane data indicates that when the effects of temperature and depth of discharge are taken into account, the observed variability in lifetime data is due almost entirely to statistical variability inherent in the battery itself.

Fedors, R. F.↗
NASA NTRS1982

Mechanisms of Interactions of Energetic Electrons with Epoxy Resins

The mechanism of deactivation of energy of excitation in a resin system was investigated on optical excitation as well as excitation by high energy electrons. This mechanism involves formation of excited state complexes, known as exciplexes which have a considerable charge transfer character. This mechanism will be used to develop a degradation model for epoxy matrix materials deployed in a space environment.

Gupta, A.↗
NASA NTRS1982

Photovoltaic module encapsulation design and materials selection, volume 1

Encapsulation material system requirements, material selection criteria, and the status and properties of encapsulation materials and processes available are presented. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described. Available encapsulation technology and data are presented to facilitate design and material selection for silicon flat plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. The operational and environmental loads that encapsulation system functional requirements and candidate design concepts and materials that are identified to have the best potential to meet the cost and performance goals for the flat plate solar array project are described. Available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

Cuddihy, E.↗
NASA NTRS1982

Photothermal characterization of encapsulant materials for photovoltaic modules

A photothermal test matrix and a low cost testing apparatus for encapsulant materials of photovoltaic modules were defined. Photothermal studies were conducted to screen and rank existing as well as future encapsulant candidate materials and/or material formulations in terms of their long term physiochemical stability under accelerated photothermal aging conditions. Photothermal characterization of six candidate pottant materials and six candidate outer cover materials were carried out. Principal products of photothermal degradation are identified. Certain critical properties are also monitored as a function of photothermal aging.

Liang, R. H.↗
NASA NTRS1982

Time-resolved spectroscopy of solid poly/1-vinyl naphthalene/ following electron beam pulse radiolysis - Pulse radiolytic studies on polymers

Transient emission studies following pulse radiolysis of solid poly(1-vinyl naphthalene) show existence of excited monomers and two excimers. Quenching experiments indicate that excimers are not formed directly by recombination of ions but probably by trapping of migrating monomeric excitation in preformed traps whose density is approximately one in 1000.

Coulter, D. R.↗
NASA NTRS1982

Pulsed radiolysis of model aromatic polymers and epoxy based matrix materials

Models of primary processes leading to deactivation of energy deposited by a pulse of high energy electrons were derived for epoxy matrix materials and polyl-vinyl naphthalene. The basic conclusion is that recombination of initially formed charged states is complete within 1 nanosecond, and subsequent degradation chemistry is controlled by the reactivity of these excited states. Excited states in both systems form complexes with ground state molecules. These excimers or exciplexes have their characteristics emissive and absorptive properties and may decay to form separated pairs of ground state molecules, cross over to the triplet manifold or emit fluorescence. ESR studies and chemical analyses subsequent to pulse radiolysis were performed in order to estimate bond cleavage probabilities and net reaction rates. The energy deactivation models which were proposed to interpret these data have led to the development of radiation stabilization criteria for these systems.

Gupta, A.↗
NASA NTRS1982

Cure kinetics of epoxy matrix resin by differential scanning calorimetry

A study was made on the cure kinetics of an epoxy neat-resin (Narmco 5208) using Differential Scanning Calorimetry (DSC). Two interrelated analytical methods were applied to dynamic DSC data for evaluating the kinetic parameters, such as activation energy, E, the order of reaction, n, and the total heat of polymerization (or crosslinking), delta H sub t. The first method was proposed by Ellerstein (1968), and uses a thorough differential-integral analysis of a single DSC curve to evaluate the kinetic parameters. The second method was proposed by Kissinger (1957), and uses multiple DSC curves obtained at various heating rates to evaluate E regardless of n. Kinetic analysis of Narmco 5208 epoxy resin showed that the reaction order, n, is substantially affected by the rate of heating; i.e., n is approximately 2 at slow scan rates but is reduced to 1.5 at higher scan rates. The activation energy, E, is not affected by the scan rate, and the average value of E is 25.6 + or - 1.8 kcal/mole.

Cizmecioglu, M.↗
NASA NTRS1981

Broadband optical radiation detector

A method and apparatus for detecting optical radiation by optically monitoring temperature changes in a microvolume caused by absorption of the optical radiation to be detected is described. More specifically, a thermal lens forming material is provided which has first and second opposite, substantially parallel surfaces. A reflective coating is formed on the first surface, and a radiation absorbing coating is formed on the reflective coating. Chopped, incoming optical radiation to be detected is directed to irradiate a small portion of the radiation absorbing coating. Heat generated in this small area is conducted to the lens forming material through the reflective coating, thereby raising the temperature of a small portion of the lens forming material and causing a thermal lens to be formed therein.

Gupta, A.↗
NASA NTRS1981

Compact infrared detector

Broadband IR detector integrated into compact package for pollution monitoring and weather prediction is small, highly responsive, and immune to high noise. Sensing material is transparent sheet metalized with reflecting coating and overcoated with black material on same side. Pulse produced by chopping of infrared source beam creates transient "thermal lens" that temporarily defocuses laser beam probe. Detector monitoring beam measures defocusing which parallels infrared intensity.

Gupta, A.↗
NASA NTRS1981

Double-beam optical method and apparatus for measuring thermal diffusivity and other molecular dynamic processes in utilizing the transient thermal lens effect

A sample material was irradiated by relatively high power, short pulses from a dye laser. Energy from the pulses was absorbed by the sample material, thereby forming a thermal lens in the area of absorption. The pulse repetition rate was chosen so that the thermal lens is substantially dissipated by the time the next pulse reaches the sample material. A probe light beam, which in a specific embodiment is a relatively low power, continuous wave (cw) laser beam, irradiated the thermal lens formed in the sample material. The intensity characteristics of the probe light beam subsequent to irradiation of the thermal lens is related to changes in the refractive index of the sample material as the thermal lens is formed and dissipated.

Moacanin, J.↗
NASA NTRS1981

Development of a weatherable acrylic elastomer for solar cell encapsulation

Poly-n-butylacrylate (PnBA) will be discussed as a potential candidate to be used in solar cell encapsulation. A new process has been developed in which PnBA can be readily cross-linked from a solvent-free syrup by a thermal process to give a highly flexible transparent film which does not creep significantly at temperature of up to 90 C. This process can be automated without the use of high cost capital equipment. Photodegradation of PnBA has also been modeled as a function of wavelengths and intensities. Its photostability will be discussed.

Liang, R.↗