Search NASA⌕ Search

Engineering topics

Gupta, Varun

Publications and source records attributed to Gupta, Varun.

22 records · Page 2

On Process, Structure, Property Relationships in Impact Welding of Aluminum 6061 and Steel 4130

Vaporizing Foil Actuator Welding process was used to weld 1mm thick aluminum alloy 6061 sheet to 3.2 mm thick 4130 grade steel plate. Temporal evolution of the flyer sheet velocity was recorded at four locations on the flyer sheet using photonic Doppler velocimetry. The welded samples were subjected to mechanical and microstructural characterization. Although the welded interface did not show a very wavy characteristic, the welds had substantial strength. Welds made with a softer temper, T4 alloy were found to be stronger than the one created with a harder, T6 temper alloy. A coupled Lagrangian-Eulerian numerical framework was also utilized to predict the structure of the interface based on the measured velocity profile. The model also depicted absence of large waves although the jetting phenomenon was observed, thereby providing insight into necessary conditions for impact welding.

Mao, Yu↗

Linking process and structure in the friction stir scribe joining of dissimilar materials: A computational approach with experimental support

We present that friction stir welding (FSW) is a popular technique to join dissimilar materials in numerous applications. The solid state nature of the process enables joining materials with strikingly different physical properties. For welds in lap configuration, an enhancement to this technology is made by introducing a short, hard insert, referred to as a cutting-scribe, at the bottom of the tool pin. The cutting-scribe induces deformation in the bottom plate which leads to the formation of mechanical interlocks or hook like structures at the interface of two materials. A thermo-mechanical computational model employing a coupled Eulerian-Lagrangian approach is developed to quantitatively capture the morphology of these interlocks during the FSW process. Simulations using this model are validated by experimental observations. In conclusion, the identified interface morphology coupled with the predicted temperature field from this process–structure model can be used to estimate the post-weld microstructure and joint strength.

36 MATERIALS SCIENCE↗

A discrete element method-based approach to predict the breakage of coal

Pulverization is an essential pre-combustion technique employed for solid fuels, such as coal, to reduce particle sizes. Smaller particles ensure rapid and complete combustion, leading to low carbon emissions. Traditionally, the resulting particle size distributions from pulverizers have been informed by empirical or semi-empirical approaches that rely on extensive data gathered over several decades during operations or experiments. However, the predictive capabilities for new coals and processes are limited. This work presents a Discrete Element Method based computational framework to predict particle size distribution resulting from the breakage of coal particles characterized by the coal’s physical properties. The effect of certain operating parameters on the breakage behavior of coal particles also is examined.

Brazilian Test.↗

Evolution and imaging of nanoparticles observed in laser ablated carbon plume

We report evidence of nanoparticles formation in laser ablated carbon plasma created by irradiating a graphite target with nanosecond neodymium doped yttrium aluminum garnet laser. The temporal evolution and spatial distribution of C{sub 2} molecules in the plasma is studied using optical emission spectroscopy, dynamic imaging and laser induced fluorescence techniques. The laser induced fluorescence spectrum and imaging of C{sub 2} fluorescence corresponding to transition d {sup 3}PI{sub g}-a {sup 3}PI{sub u} (0, 1) (lambda=563.5 nm) is investigated by probing the expanding plume using a dye laser. The temporal evolution of ground state number density of C{sub 2} shows density varying from 2.6x10{sup 20}/m{sup 3} to 1.2x10{sup 22}/m{sup 3} on varying delay between the ablating and probe pulse from 200 to 600 ns. A peculiar bifurcation of carbon plume into two parts at approx270 ns after the formation of plasma is attributed to recombination of carbon species and formation of nanoparticles. This study may help in quantitatively understanding of formation of carbon molecular species and the nanoparticles produced in laser ablated carbon plume.

77 NANOSCIENCE AND NANOTECHNOLOGY↗