Search NASA⌕ Search

Engineering topics

Han, Yong

Publications and source records attributed to Han, Yong.

At least 55 records · Page 3

Fabricating Fe nanocrystals via encapsulation at the graphite surface

In this paper, the authors describe the conditions under which Fe forms encapsulated nanocrystals beneath the surface of graphite, and they characterize these islands (graphite + Fe) thoroughly. The authors use the experimental techniques of scanning tunneling microscopy (STM) plus x-ray photoelectron spectroscopy (XPS) and the computational technique of density functional theory (DFT). Necessary conditions for encapsulation are preexisting ion-induced defects in the graphite substrate and elevated deposition temperature of 875–900 K. Evidence of encapsulation consists of atomically resolved STM images of a carbon lattice, both on top of the islands and on the sloping sides. The nature of the images indicates that this carbon lattice corresponds to a graphene blanket consisting of more than one graphene sheet that drapes continuously from the top of the island to the graphite substrate. The formation of iron carbide is not observed based on XPS. Shapes of the island footprints are consistent with metallic Fe, predominantly in the hcp or fcc form, though larger islands tend toward bcc. Island structures with hexagonally close-packed lateral hcp or fcc planes are stabilized by their excellent lattice match with the graphite substrate. Evolution of island density with prolonged deposition time provides evidence of coarsening, perhaps via Smoluchowski ripening. The encapsulated Fe clusters are stable in air at room temperature, protected by smaller Fe clusters that decorate defect sites and block permeation of gases. DFT shows that two configurations of Fe are more stable within the gallery than adsorbed on top of the surface: a single atom of Fe and a film (slab) of metallic Fe. Comparison with other metals shows that encapsulated Fe is similar to Cu but dissimilar to Ru or Dy, leading the authors to conclude that carbon dissolution in the metal does not play a role in encapsulation.

36 MATERIALS SCIENCE↗

Low-index surface energies, cleavage energies, and surface relaxations for crystalline NiAl from first-principles calculations

NiAl surfaces frequently serve as a platform for studying a broad range of physical and chemical phenomena including chemisorption, catalysis, oxidation, alloy growth, and surface nanostructure formation. Knowledge of precise values for low-index surface energies of NiAl, the most fundamental quantities characterizing surface thermodynamics, is often invaluable for understanding of these phenomena. In all previous analyses for NiAl(100) and NiAl(111), Ni- and Al-terminations are not distinguished, and half of the cleavage energy (or equivalently, the average of the surface energies of two differently terminated surfaces) is always identified as the “surface energy”. No values are available for individual surface energies of Ni- or Al-terminated NiAl(100) or NiAl(111) surfaces, whereas knowledge of only cleavage energy is often insufficient for analyzing surface-associated behavior. As such, in this work we perform extensive first-principles density-functional-theory (DFT) calculations for surface energies and cleavage energies of NiAl(110), NiAl(100) and NiAl(111) by considering the chemical-potential-based formulations to clarify the ambiguity in their surface energies and cleavage energies. We obtain a surface-energy phase diagram for these three low-index surfaces versus the relevant chemical potential, as well as the chemical-potential-dependent Wulff plots for NiAl crystal equilibrium shapes. We also provide the surface-relaxation information from our DFT calculations for comparison with previous experimental data.

42 ENGINEERING↗

Energy barriers for Pb adatom diffusion on stepped ultrathin Pb(111) quantum nanofilms: First-principles calculations

Various properties of Pb(111) nanofilms, prototypical quantum films, have been studied extensively. However, key ab initio -level energy barriers for Pb adatom diffusion on stepped Pb(111) nanofilm surfaces are still not available. Using first-principles density functional theory, we calculate these barriers for films with thicknesses of few monolayers (ML). We find that two-atom exchange is always much more favorable than direct hopping to cross A- or B-type steps. Ehrlich-Schwoebel (ES) barriers for downward transport to a higher-coordination step-edge site depend strongly on the film thickness. For such transport from 2- to 1-ML terraces, or from 4- to 3-ML terraces, there is no an ES barrier, but large ES barriers of more than 100 meV are found from 3- to 2-ML terraces. We also obtain the barriers for diffusion along the step edges and find that these step-edge barriers are significantly larger than terrace diffusion barriers. In addition, we analyze energetics for diffusion on the top flat surface of a nanofilm supported on a vicinal surface, and thus having underlying buried or ghost steps. We quantify the tilted potential energy surface in both ghost A- and B-step regions separating 2- and 3-ML (as well as 3- and 4-ML) terraces. Finally, consequences are discussed for the growth kinetics of supported Pb nanofilms, where the support does not strongly affect electronic states within the film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface energies, adhesion energies, and exfoliation energies relevant to copper-graphene and copper-graphite systems

We have generated precise values for several key energies that are relevant to Cu-graphene or Cu-graphite systems. Such systems may find technological applications that range from graphene synthesis, to condensation heat transfer, to electrical contacts to graphene, to composites. Using density functional theory, we have calculated surface energies of the three low-index faces of bulk Cu. We find that these surface energies, calculated with the PBEsol functional, are significantly higher than with the more common PBE functional and agree more closely with experiment. We have also calculated the surface energies of graphene and graphite, the exfoliation energy between graphene and graphite, and the adhesion energies between graphene or graphite and a Cu(111) slab. The adhesion energy between a carbon layer and Cu(111) is close to the exfoliation energy and cleavage energy of graphite, the four sets of values spanning a range of only 0.394–0.456 J/m2. Our results are consistent with the earlier experimental observation of three-dimensional growth of Cu on top of graphite. The energies are also used to perform a continuum Winterbottom analysis and also discrete (atomistic) variants of this analysis to predict the equilibrium shapes of Cu particles supported on graphite.

Han, Yong↗

Reshaping, Intermixing, and Coarsening for Metallic Nanocrystals: Nonequilibrium Statistical Mechanical and Coarse-Grained Modeling

Self-assembly of supported 2D or 3D nanocrystals (NCs) by vacuum deposition and of 3D NCs by solution-phase synthesis (with possible subsequent transfer to a support) produces intrinsically nonequilibrium systems. Individual NCs can have far-from-equilibrium shapes and composition profiles. The free energy of NC ensembles is lowered by coarsening which can involve Ostwald ripening or Smoluchowski ripening (NC diffusion and coalescence). Preservation of individual NC structure and inhibition of coarsening are key, e.g., for avoiding catalyst degradation. This review focuses on postsynthesis evolution of metallic NCs. Atomistic-level modeling typically utilizes stochastic lattice-gas models to access appropriate time and length scales. However, predictive modeling requires incorporation of realistic rates for relaxation mechanisms, e.g., periphery diffusion and intermixing, in numerous local environments (rather than the use of generic prescriptions). Alternative coarse-grained modeling must also incorporate appropriate mechanisms and kinetics. At the level of individual NCs, we present analyses of reshaping, including sintering and pinch-off, and of compositional evolution in a vacuum environment. Here, we also discuss modeling of coarsening including diffusion and decay of individual NCs and unconventional coarsening processes. We describe high-level modeling integrated with scanning tunneling microscopy (STM) studies for supported 2D epitaxial nanoclusters and developments in modeling for 3D NCs motivated by in situ transmission electron microscopy (TEM) studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Stabilities of Perfect and Vacancy-Defected Li 2 TiO 3 (001) Surfaces From First-Principles Analyses

Lithium titanate (Li 2 TiO 3 ) is an attractive ceramic material for various industrial applications, particularly as one of the most promising breeder blanket materials in future nuclear-fusion reactors. Previously reported studies mainly focus on sintered polycrystalline samples of Li 2 TiO 3 . Surface structure of the single-crystal form is rarely reported, although the information of surface structures and stabilities can be critical for further understanding the surface-associated processes. In this work, we perform extensive first-principles density-functional-theory (DFT) calculations to obtain the surface energies of Li 2 TiO 3 (001) with different surface terminations. For four perfect (defect-free) Li-, O-, or LiTi-terminated (001) surfaces, Li- or O-terminated (001) surfaces can be most stable in limited chemical-potential ranges corresponding to certain experimental conditions, while a LiTi-terminated (001) surface is always unfavorable relative to Li or O terminations. By calculating the total energies of various possible configurations with surface vacancies, we determine the energetically most favorable vacancy-defected surface terminations. From the corresponding ternary phase diagram, we analyze the stability of a specific surface termination with vacancies as well as the possible formation of oxides. Here, our stability analysis together with DFT-simulated STM images reveals that a 1/3-monolayer-Li-terminated surface most likely corresponds to the ordered hexagonal-like pattern observed previously in STM experiments. For a 1/2-monolayer-Li-terminated surface, the most stable surface structure from our DFT calculations contrasts with previous results from an empirical-potential model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CO 2 Activation on Ni(111) and Ni(100) Surfaces in the Presence of H 2 O: An Ambient-Pressure X-ray Photoelectron Spectroscopy Study

Nickel-based catalysts play an important role in the chemical transformation of CO 2 . A fundamental understanding of the interaction between CO 2 and Ni surfaces at atomic level is necessary. In this study, the interfacial reactions of CO 2 and CO 2 + H 2 O mixture on Ni(111) as well Ni(100) surfaces were investigated using ambient pressure X-ray photoelectron spectroscopy as well as theoretical calculations. The results indicate that the distributions of dissociation products are very different on the Ni(111) and Ni(100) surfaces. Carbonate, CO, and graphitic carbon formed on both Ni(111) and Ni(100) surfaces in the presence of 0.2 Torr CO 2 . However, more than 90% adsorption species on the Ni(111) surface is the carbonate, whereas the Ni(100) surface is mainly covered by adsorbed CO* and graphitic carbon. The co-adsorption of H 2 O weakens the influence of structure effect on the interfacial interaction between CO 2 and Ni surfaces. Furthermore, the density functional theory calculations suggest that the activation of CO 2 on Ni(111) and Ni(100) tends to follow different reaction paths, which are consistent with the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Squeezed Nanocrystals: Equilibrium Configuration of Metal Clusters Embedded Beneath the Surface of a Layered Material

Shapes of functional metallic nanocrystals, typically synthesized either free in solution or supported on surfaces, are key for controlling properties. Here, we consider a novel new class of metallic nanocrystals, copper clusters embedded near the surface of graphite, which can be considered a model system for metals embedded beneath surfaces of layered materials, or beneath supported membranes. We develop a continuum elasticity (CE) model for the equilibrium shape of these islands, and compare its predictions with experimental data. The CE model incorporates appropriate surface energy, adhesion energies, and strain energy. The agreement between the CE model and the data is—with one exception—excellent, both qualitatively and quantitatively, and is achieved with a single adjustable parameter. The model predicts that the embedded island shape is invariant with size, manifest both by constant side slope and by constant aspect ratio. This prediction is rationalized by dimensional analysis of the relevant energetic contributions. The aspect ratio of an embedded Cu cluster is much larger than that of a supported but non-embedded Cu cluster, due to resistance of the graphene membrane to deformation. Experimental data diverge from the model predictions only in the case of the aspect ratio of small islands, below a critical height of ~10 nm. The divergence may be due to bending strain, which is treated only approximately in the model. Strong support for the CE model and its interpretation is provided by additional data for embedded Fe clusters. Most of these observations and insights should be generally applicable to systems where a metal cluster is embedded beneath a layered material or supported membrane, provided that shape equilibration is possible.

Julien, Scott↗

Energetics of Cu adsorption and intercalation at graphite step edges

To assess the energetics of Cu intercalation on defective graphite, the chemical potentials and binding energies for Cu at graphite step edges are calculated for three main configurations: an isolated atom, a chain, and an atom attached to a chain. As expected, for Cu interacting directly with a graphite step edge, the strength of interaction depends on the stability of the step, with Cu binding more strongly at a less-stable step. However, the relationship is reversed when considering binding of a Cu atom attached to a chain. Taken together, these trends mean that if the graphite step is less stable, as for the zigzag step, then decorating the step with a Cu chain facilitates intercalation by additional Cu atoms (which are less strongly bound to the decorated step). For more stable steps, intercalation is optimal without decoration. We also calculate the diffusion barrier for atomic Cu on top of the graphite terrace and, in the uppermost gallery, find values of 0.008 and 0.021 eV, respectively. Furthermore these values are very small, indicating that the minimum barrier for a Cu atom to detach from a step and move to a terrace or gallery is dominated by the difference in binding energies. For intercalation, this minimum barrier is 1.4 to 3.1 eV and depends strongly on step configuration.

36 MATERIALS SCIENCE↗

Water Resources Utilization and Protection in the Coal Mining Area of Northern China

This study investigates multiple types of water resources in the western mining area in China, their supply-demand balance by using the same dimension gray recurrence dynamic model GM (1, 1), and water content coefficients of mines to ease water supply-demand contradiction. A multi-objective programming model is proposed for optimal water resources allocation management. Optimal technical schemes for water resources allocation among different users are obtained. The optimization model improves upon the previous studies by using water demand and water supply forecast. Coordinated development for mining safety, mine water utilization, and remediation and control of water environment is achieved.

54 ENVIRONMENTAL SCIENCES↗

Reverse-engineering of graphene on metal surfaces: a case study of embedded ruthenium

Using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy, we show that Ru forms metallic nanoislands on graphite, covered by a graphene monolayer. These islands are air-stable, contain 2-4 layers of Ru, and have diameters on the order of 10 nm. To produce these nanoislands two conditions must be met during synthesis. The graphite surface must be ion-bombarded, and subsequently held at elevated temperature (1000-1180 K) during Ru deposition. A coincidence lattice forms between the graphene overlayer and the Ru island top. Its characteristics – coincidence lattice constant, corrugation amplitude, and variation of carbon lattice appearance within the unit cell – closely resemble the well-established characteristics of single-layer graphene on the (0001) surface of bulk Ru. Quantitative analysis of the graphene lattice in relation to the coincidence lattice on the island tops shows that the twodimensional lattice constant of the underlying metal equals that of bulk Ru(0001), within experimental error. The embedded Ru islands are energetically favored over on-top (adsorbed) islands, based on density-functional-theory calculations for Ru films with 1-3 Ru layers. We propose a formation mechanism in which Ru atoms intercalate via defects that act as entry portals to the carbon galleries, followed by nucleation and growth in the galleries. In this model, high deposition temperature is necessary to prevent blockage of entry portals.

36 MATERIALS SCIENCE↗

Anisotropic Diffusion of a Charged Tritium Interstitial in Li 2 Ti O 3 from First-Principles Calculations

Tritium diffusion in the nuclear fusion reactor breeder material Li 2 TiO 3 is a fundamentally important process for the tritium release kinetics. The energy barrier of tritium diffusion in Li 2 TiO 3 was reported with a considerable uncertainty in previous experiments. Here, we perform the systematic density-functional-theory (DFT) studies for the diffusion processes of a positively-charged tritium, which is the most preferable charge state of the tritium interstitial in a single Li 2 TiO 3 crystal. By calculating various local-diffusion minimum-energy paths, we find that the diffusion of the tritium is strongly anisotropic along different crystalline directions. The most favorable diffusion paths appear within a Li 6 atomic single layer of Li 2 TiO 3 and the corresponding DFT diffusion barrier is 0.281 eV, while the diffusion barrier for most favorable diffusion paths crossing a Li 2 Ti 4 atomic layer is 0.868 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SiO 2 -Enhanced Structural Stability and Strong Adhesion with a New Binder of Konjac Glucomannan Enables Stable Cycling of Silicon Anodes for Lithium-Ion Batteries

Silicon-based anodes with high theoretical capacity have intriguing potential applications for next-generation high-energy lithium-ion batteries, but suffer from huge volumetric change that causes pulverization of electrodes. Rational design and construction of effective electrode structures combined with versatile binders remain a significant challenge. In this paper, a unique natural binder of konjac glucomannan (KGM) is developed and an amorphous protective layer of SiO 2 is fabricated on the surface of Si nanoparticles (Si@SiO 2 ) to enhance the adhesion. Benefiting from a plethora of hydroxyl groups, the KGM binder with inherently high adhesion and superior mechanical properties provides abundant contact sites to active materials. Molecular mechanics simulations and experimental results demonstrate that the enhanced adhesion between KGM and Si@SiO 2 can bond the particles tightly to form a robust electrode. In addition to bridging KGM molecules, the SiO 2 -functionalized surface may serve as a buffer layer to alleviate the stresses of Si nanoparticles resulting from the volume change. The as-fabricated KGM/Si@SiO 2 electrode exhibits outstanding structural stability upon long-term cycles. Finally, a highly reversible capacity of 1278 mAh g -1 can be achieved over 1000 cycles at a current density of 2 A g -1 , and the capacity decay is as small as 0.056% per cycle.

25 ENERGY STORAGE↗

Formation of Multilayer Cu Islands Embedded beneath the Surface of Graphite: Characterization and Fundamental Insights

Here in this paper, we present an extensive experimental study of the conditions under which Cu forms encapsulated islands under the top surface layers of graphite, as a result of physical vapor deposition of Cu on argon-ion-bombarded graphite. When the substrate is held at 800 K during deposition, conditions are optimal for formation of encapsulated multilayer Cu islands. Deposition temperatures below 600 K favor adsorbed Cu clusters, while deposition temperatures above 800 K favor a different type of feature that is probably a single-layer intercalated Cu island. The multilayer Cu islands are characterized with respect to size and shape, thickness and continuity of the graphitic overlayer, relationship to graphite steps, and stability in air. The experimental techniques are scanning tunneling microscopy and X-ray photoelectron spectroscopy. We also present an extensive study using density functional theory to compare stabilities of a wide variety of configurations of Cu atoms, Cu clusters, and Cu layers on/under the graphite surface. The only configuration that is significantly more stable under the graphite surface than on top of it, is a single Cu atom. This analysis leads us to conclude that formation of encapsulated Cu islands is kinetically driven, rather than thermodynamically driven.

36 MATERIALS SCIENCE↗