Search NASA⌕ Search

Engineering topics

Han, Yong

Publications and source records attributed to Han, Yong.

At least 73 records · Page 4

Thickness-dependent energetics for Pb adatoms on low-index Pb nanofilm surfaces: First-principles calculations

Adsorption, interaction, and diffusion of adatoms on surfaces control growth and relaxation of epitaxial nanostructures and nanofilms. Previous reports of key diffusion barriers for Pb diffusion on low-index Pb surfaces are limited in scope and accuracy. Thus, we apply density functional theory (DFT) to calculate the adsorption and diffusion energetics for a Pb adatom on Pb(111), Pb(100), and Pb(110) nanofilms with different thicknesses. We find that these quantities exhibit damped oscillatory variation with increasing film thickness. For Pb(111) films, energetics along the minimum energy path for Pb adatom diffusion between adjacent fcc and hcp sites varies significantly with film thickness, its form differing from other metal-on-metal(111) systems. For Pb(111) and Pb(100) nanofilms, diffusion barriers obtained for both adatom hopping and exchange mechanism differ significantly from previous DFT results. Hopping is favored over exchange for Pb(111), and the opposite applies for Pb(100). For Pb(110) nanofilms, Pb adatom hopping over an in-channel bridge is most facile, then in-channel exchange, then cross-channel exchange, with cross-channel hopping least favorable. We also assess lateral Pb adatom interactions, and characterize island nucleation during deposition on Pb(111).

36 MATERIALS SCIENCE↗

Nucleation and growth kinetics for intercalated islands during deposition on layered materials with isolated pointlike surface defects

Theory and stochastic lattice-gas modeling is developed for the formation of intercalated metal islands in the gallery between the top layer and the underlying layer at the surface of layered materials. Our model for this process involves deposition of atoms, some fraction of which then enter the gallery through well-separated pointlike defects in the top layer. Subsequently, these atoms diffuse within the subsurface gallery leading to nucleation and growth of intercalated islands nearby the defect point source. For the case of a single point defect, continuum diffusion equation analysis provides insight into the nucleation kinetics. However, complementary tailored lattice-gas modeling produces a more comprehensive and quantitative characterization. We analyze the large spread in nucleation times and positions relative to the defect for the first nucleated island. We also consider the formation of subsequent islands and the evolution of island growth shapes. The shapes reflect in part our natural adoption of a hexagonal close-packed island structure. As a result, motivation and support for the model is provided by scanning tunneling microscopy observations of the formation of intercalated metal islands in highly-ordered pyrolytic graphite at higher temperatures.

36 MATERIALS SCIENCE↗

Observing the Electrochemical Oxidation of Co Metal at the Solid/Liquid Interface Using Ambient Pressure X-ray Photoelectron Spectroscopy

Some rcent advances of ambient pressure X-ray photoelectron spectroscopy (AP-XPS) have enabled the chemical composition and the electrical potential profile at a liquid/electrode interface under electrochemical reaction conditions to be directly probed. In this work, we apply this operando technique to study the surface chemical composition evolution on a Co metal electrode in 0.1 M KOH aqueous solution under various electrical biases. It is found that an ~12.2 nm-thick layer of Co(OH) 2 forms at a potential of about -0.4 V Ag/AgCl , and upon increasing the anodic potential to about +0.4 V Ag/AgCl , this layer is partially oxidized into cobalt oxyhydroxide (CoOOH). A CoOOH/Co(OH) 2 mixture layer is formed on the top of the electrode surface. Finally, the oxidized surface layer can be reduced to Co0 at a cathodic potential of -1.35 VAg/Cl. Our observations indicate that the ultrathin layer containing cobalt oxyhydroxide is the active phase for oxygen evolution reaction (OER) on a Co electrode in an alkaline electrolyte, consistent with previous studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Capture zone area distributions for nucleation and growth of islands during submonolayer deposition

A fundamental evolution equation is developed to describe the distribution of areas of capture zones (CZs) associated with islands formed by homogeneous nucleation and growth during submonolayer deposition on perfect flat surfaces. This equation involves various quantities which characterize subtle spatial aspects of the nucleation process. These quantities in turn depend on the complex stochastic geometry of the CZ tessellation of the surface, and their detailed form determines the CZ area distribution (CZD) including its asymptotic features. For small CZ areas, behavior of the CZD reflects the critical island size, i. For large CZ areas, it may reflect the probability for nucleation near such large CZs. Predictions are compared with kinetic Monte Carlo simulation data for models with two-dimensional compact islands with i = 1 (irreversible island formation by diffusing adatom pairs) and i = 0 (adatoms spontaneously convert to stable nuclei, e.g., by exchange with the substrate).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Point island models for nucleation and growth of supported nanoclusters during surface deposition

Point island models (PIMs) are presented for the formation of supported nanoclusters (or islands) during deposition on flat crystalline substrates at lower submonolayer coverages. These models treat islands as occupying a single adsorption site, although carrying a label to track their size (i.e., they suppress island structure). However, they are particularly effective in describing the island size and spatial distributions. In fact, these PIMs provide fundamental insight into the key features for homogeneous nucleation and growth processes on surfaces. PIMs are also versatile being readily adapted to treat both diffusion-limited and attachment-limited growth and also a variety of other nucleation processes with modified mechanisms. Their behavior is readily and precisely assessed by kinetic Monte Carlo simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab Initio Thermodynamics and Kinetics for Coalescence of Two-Dimensional Nanoislands and Nanopits on Metal (100) Surfaces

Postdeposition coalescence or sintering of pairs of lowstrain two-dimensional nanoislands and nanopits on unreconstructed metal (100) surfaces is typically mediated by diffusion along step edges, and is highly sensitive to the associated kinetics. Thus, for selected systems, we provide an ab initio density functional theory (DFT) level description of both system thermodynamics and kinetics. Specifically, we assess lateral pair and trio interactions both conventionally with adatoms at 4-fold hollow adsorption sites, and unconventionally with one adatom at the bridge-site transition state for hopping. Rather than use standard cluster expansion algorithms, these interactions are determined subject to the constraint that key step-edge properties are recovered exactly. Together, both classes of interactions determine barriers for edge diffusion processes for any local step configuration, including diffusion along close-packed $\langle$110$\rangle$ edges, kink rounding, meandering processes at kinked $\langle$100$\rangle$ steps, and extraction processes at pit corners. Our formalism applies for homoepitaxial systems, and also for several lattice-matched heteroepitaxial systems. The barriers provide input for stochastic models of nanocluster evolution, which are analyzed by kinetic Monte Carlo simulation. Such modeling with DFT energetics from the PBEsol functional recovers extensive experimental observations of both the time scale and the island-size dependence for sintering of Ag islands on Ag(100). In conclusion, description of pit sintering on Ag(100) is more delicate, being sensitive to specific unconventional trio interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Kinetics on a Topological Insulator Surface by Defect-Induced Strain: Pb Mobility on Bi 2 Te 3

Heteroepitaxial structures based on Bi2Te3-type topological insulators (TIs) exhibit exotic quantum phenomena. For optimal characterization of these phenomena, it is desirable to control the interface structure during film growth on such TIs. In this process, adatom mobility is a key factor. We demonstrate that Pb mobility on the Bi2Te3(111) surface can be modified by the engineering local strain, ε, which is induced around the point-like defects intrinsically forming in the Bi2Te3(111) thin film grown on a Si(111)-7 × 7 substrate. Scanning tunneling microscopy observations of Pb adatom and cluster distributions and first-principles density functional theory (DFT) analyses of the adsorption energy and diffusion barrier Ed of Pb adatom on Bi2Te3(111) surface show a significant influence of ε. Surprisingly, Ed reveals a cusp-like dependence on ε due to a bifurcation in the position of the stable adsorption site at the critical tensile strain εc ≈ 0.8%. This constitutes a very different strain-dependence of diffusivity from all previous studies focusing on conventional metal or semiconductor surfaces. Kinetic Monte Carlo simulations of Pb deposition, diffusion, and irreversible aggregation incorporating the DFT results reveal adatom and cluster distributions compatible with our experimental observations.

Chemistry↗

Submonolayer Ag films on Fe(100): A first-principles analysis of energetics controlling adlayer thermodynamics and kinetics

Epitaxial growth of Ag on Fe(100) and postdeposition relaxation have been studied in several experiments. We provide a first-principles density functional theory analysis of key adatom interaction energies and diffusion barriers controlling growth and relaxation kinetics for the submonolayer regime, as these have not been assessed previously. A cluster expansion approach is used to obtain an extensive set of conventional lateral interactions between adatoms on fourfold hollow adsorption sites. We find robust oscillatory decay of pair interactions with increasing separation, and of trio interactions with increasing perimeter length. First- and second-nearest-neighbor pair interactions, as well as compact linear and bent trio interactions, dominate. The adatom terrace diffusion barrier is estimated to be E d ≈ 0.39 eV. We also provide a limited analysis of unconventional interactions for which one adatom is at the bridge-site transition state for hopping and one or more others are at fourfold hollow sites. Furthermore, energy barriers for diffusion along island edges can be determined with the aid of both conventional and unconventional interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth morphology and properties of metals on graphene

Graphene, a single atomic layer of graphite, has been the focus of recent intensive studies due to its novel electronic and structural properties. With this study, metals grown on graphene also have been of interest because of their potential use as metal contacts in graphene devices, for spintronics applications, and for catalysis. All of these applications require good understanding and control of the metal growth morphology, which in part reflects the strength of the metal–graphene bond. The interaction between graphene and metal is sufficiently strong to modify the electronic structure of graphene is also of great importance. We will discuss recent experimental and computational studies related to deposition of metals on graphene supported on various substrates (SiC, SiO 2 , and hexagonal close-packed metal surfaces). Of specific interest are the metal–graphene interactions (adsorption energies and diffusion barriers of metal adatoms), and the crystal structures and thermal stability of the metal nanoclusters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adsorption and diffusion of Ru adatoms on Ru(0001)-supported graphene: Large-scale first-principles calculations

Large-scale first-principles density functional theory calculations are performed to investigate the adsorption and diffusion of Ru adatoms on monolayer graphene (G) supported on Ru(0001). The G sheet exhibits a periodic moiré-cell superstructure due to lattice mismatch. Within a moiré cell, there are three distinct regions: fcc, hcp, and mound, in which the C{sub 6}-ring center is above a fcc site, a hcp site, and a surface Ru atom of Ru(0001), respectively. The adsorption energy of a Ru adatom is evaluated at specific sites in these distinct regions. We find the strongest binding at an adsorption site above a C atom in the fcc region, next strongest in the hcp region, then the fcc-hcp boundary (ridge) between these regions, and the weakest binding in the mound region. Behavior is similar to that observed from small-unit-cell calculations of Habenicht et al. [Top. Catal. 57, 69 (2014)], which differ from previous large-scale calculations. We determine the minimum-energy path for local diffusion near the center of the fcc region and obtain a local diffusion barrier of ∼0.48 eV. We also estimate a significantly lower local diffusion barrier in the ridge region. These barriers and information on the adsorption energy variation facilitate development of a realistic model for the global potential energy surface for Ru adatoms. This in turn enables simulation studies elucidating diffusion-mediated directed-assembly of Ru nanoclusters during deposition of Ru on G/Ru(0001)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directing Anisotropic Assembly of Metallic Nanoclusters by Exploiting Linear Trio Interactions and Quantum Size Effects: Au Chains on Ag(100) Thin Films

Discovery and understanding of mechanisms for kinetically controlled growth of metal nanoclusters can be enabled by realistic atomistic-level modeling with ab initio kinetics. KMC simulation of such a model for Au deposition on Ag(100) films reveals the formation of single-atom-wide Au chains below 275 K, even though 2D islands are thermodynamically preferred. Chain formation is shown to reflect a combination of strong linear trio attractions guiding assembly and a weak driving force and slow rate of transformation of 1D chains to 2D islands (or sometimes irreversible rounding of adatoms from chain sides to ends). Behavior can also be tuned by quantum size effects: chain formation predominates on 2-monolayer Ag(100) films supported on NiAl(100) at 250 K for low coverages but not on 1- or 3-monolayer films, and longer chains form than on bulk Ag(100). Finally, our predictive kinetic modeling shows the potential for simulation-guided discovery and analysis of novel self-assembly processes.

ab initio periphery diffusion kinetics↗

In-situ monitoring of flow-permeable surface area of high explosive powder using small sample masses

To ensure good performance of high explosive devices over long periods of time, initiating powders need to maintain their specific surface area within allowed margins during the entire duration of deployment. A common diagnostic used in this context is the Fisher sub-sieve surface area (FSSA). Furthermore, commercial permeametry instruments measuring the FSSA requires the utilization of a sample mass equal to the crystal density of the sample material, an amount that is often one or two orders of magnitude larger than the typical masses found in standard detonator applications. Here we develop a customization of the standard device that can utilize just tens of milligram samples, and with simple calibration yield FSSA values at ac curacy levels comparable to the standard apparatus. This necessitated a newly designed sample holder, made from a material of low coefficient of thermal expansion, which is conveniently transferred between an aging chamber and a re-designed permeametry tube. This improves the fidelity of accelerated aging studies by allowing measurement on the same physical sample at various time - instants during the aging process, and by obviating the need for a potentially FSSA-altering powder re-compaction step. We used the customized apparatus to monitor the FSSA evolution of a number of undoped and homolog-doped PETN powder samples that were subjected to artificial aging for several months at elevated temperatures. These results, in conjunction with an Arrhenius-based aging model were used to assess powder-coarsening - rates under long-term storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining whether metals nucleate homogeneously on graphite: A case study with copper

In this study, we observe that Cu clusters grow on surface terraces of graphite as a result of physical vapor deposition in ultrahigh vacuum. We show that the observation is incompatible with a variety of models incorporating homogeneous nucleation and calculations of atomic-scale energetics. An alternative explanation, ion-mediated heterogeneous nucleation, is proposed and validated, both with theory and experiment. This serves as a case study in identifying when and whether the simple, common observation of metal clusters on carbon-rich surfaces can be interpreted in terms of homogeneous nucleation. We describe a general approach for making system-specific and laboratory-specific predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-Time Ab Initio KMC Simulation of the Self-Assembly and Sintering of Bimetallic Epitaxial Nanoclusters: Au + Ag on Ag(100)

Far-from-equilibrium shape and structure evolution during formation and post-assembly sintering of bimetallic nanoclusters is extremely sensitive to the periphery diffusion and intermixing kinetics. Precise characterization of the many distinct local-environment-dependent diffusion barriers is achieved for epitaxial nanoclusters using density functional theory to assess interaction energies both with atoms at adsorption sites and at transition states. Kinetic Monte Carlo simulation incorporating these barriers then captures structure evolution on the appropriate time scale for two-dimensional core-ring and intermixed Au-Ag nanoclusters on Ag(100).

36 MATERIALS SCIENCE↗

Interaction of oxygen with samarium on Al{sub 2}O{sub 3} thin film grown on Ni{sub 3}Al(111)

The interaction between oxygen and samarium (Sm) on the well-ordered thin Al{sub 2}O{sub 3} film grown on Ni{sub 3}Al(111) has been investigated by X-ray photoelectron spectroscopy and synchrotron radiation photoemission spectroscopy. At Sm coverage higher than one monolayer, exposure of oxygen to the Sm films at room temperature leads to the formation of both samarium peroxide (O{sub 2}{sup 2−}) states and regular samarium oxide (O{sup 2−}) states. By contrast, when exposing O{sub 2} to Sm film less than one monolayer on Al{sub 2}O{sub 3}, no O{sub 2}{sup 2−} can be observed. Upon heating to higher temperatures, these metastable O{sub 2}{sup 2−} states dissociate, supplying active O atoms which can diffuse through the Al{sub 2}O{sub 3} thin film to further oxidize the underlying Ni{sub 3}Al(111) substrate, leading to the significant increase of the Al{sub 2}O{sub 3} thin film thickness. Therefore, it can be concluded that Sm, presumably in its peroxide form, acts as a catalyst for the further oxidation of the Ni{sub 3}Al substrate by supplying the active oxygen species at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytic formulations for one-dimensional decay of rectangular homoepitaxial islands during coarsening on anisotropic fcc (110) surfaces

Submonolayer homoepitaxial fcc (110) systems display behavior reflecting strong anisotropy at lower temperatures, including one-dimensional decay during Ostwald ripening of rectangular islands maintaining constant width in the (001) direction. To appropriately describe this behavior, we first develop a refined continuum Burton-Cabrera-Frank formalism, which accounts for a lack of equilibration of island shape and importantly also for inhibited incorporation of adatoms at almost-faceted (1¯10) island edges through effective kinetic coefficients. This formalism is shown to describe accurately the adatom diffusion fluxes between islands and thus island evolution for a complex experimental island configuration, as confirmed by matching results from realistic atomistic simulations for this configuration. This approach also elucidates basic dependencies of flux on island geometry and temperature. Second, a further refinement is presented incorporating separate terrace and edge adatom density fields either in a continuum setting or alternatively in a spatially discrete diffusion equation setting. The second approach allows more flexibility and accuracy in accounting for edge-diffusion kinetics including corner rounding, a lack of equilibration of the edge adatom density at (1¯10) island edges, and the effect of rare kinks on (1¯10) island edges. Finally and significantly, it suggests facile two-way corner rounding at the island periphery during island decay, contrasting the previous picture.

36 MATERIALS SCIENCE↗