Engineering topics

Hanna, M. F.

Publications and source records attributed to Hanna, M. F..

8 records

NASA NTRS1986

Determining Internal Connections in Capacitors

Simple electrical test shows which terminals connected to outer capacitor foil. Test makes it unnecessary to resort to X-ray inspection to distinguish terminals. When outer foil of capacitor is attached to ungrounded signal-generator output lead, oscilloscope displays higher waveform amplitude. When outer foil is joined to grounded signalgenerator output lead, waveform amplitude is lower. Test also used to determine internal connections in multiple-element capacitors.

Ott, F. M.↗

NASA NTRS1984

Method and apparatus for precision control of radiometer

A radiometer controller of a radiation detector is provided with a calibration method and apparatus comprised of mounting all temperature sensitive elements of the controller in thermostatically controlled ovens during calibration and measurements, using a selected temperature that is above any which might be reached in the field. The instrument is calibrated in situ by adjusting heater power (EI) to the receptor cavity in the radiometer detector to a predetermined full scale level and is displayed by a meter.

Estey, R. S.↗

NASA NTRS1983

Pyrheliometer With Improved Accuracy

Instrument maintains components at constant temperature and allows tenfold improvement in instrumental accuracy. Two units make up improved pyreheliometer. Radiometer absorbs radiant energy and generates electrical signal. Control unit, which incorporates improvements, provides amplifiers, controls, and calibration circuits. Instrument 10 times more accurate than previous sion.

Estey, R. S.↗

NASA NTRS1977

Solid-state RF switch

Consisting of NAND gates, switch can be expanded to multipole input and can switch at frequencies up to 30MHz. Device uses digital integrated circuits to provide isolation between inputs and between input and output ports.

Hanna, M. F.↗

NASA NTRS1974

High isolation RF signal selection switches

A selection switch with high isolation between RF signal input terminals is achieved with a gated Schmitt trigger circuit feeding into a control NAND gate in each signal switching channel. The control NAND gates of the separate signal channels are coupled to an output terminal by a single NAND gate. The schmitt trigger circuits and all gates are implemented with Schottky transistor-transistor logic circuits having input clamping diodes. Each Schmitt trigger circuit includes two cascaded NAND gates and a feedback isolation Schottky diode between one input terminal connected to receive an RF input and another input terminal connected to receive a feedback signal from the second of the two cascaded NAND gates. Both NAND gates of the Schmitt trigger circuits are enabled by the same switch control signal which enables the control gates.

Hanna, M. F.↗

NASA NTRS1973

Event sequence detector

An event sequence detector is described with input units, each associated with a row of bistable elements arranged in an array of rows and columns. The detector also includes a shift register which is responsive to clock pulses from any of the units to sequentially provide signals on its output lines each of which is connected to the bistable elements in a corresponding column. When the event-indicating signal is received by an input unit it provides a clock pulse to the shift register to provide the signal on one of its output lines. The input unit also enables all its bistable elements so that the particular element in the column supplied with the signal from the register is driven to an event-indicating state.

Hanna, M. F.↗

NASA NTRS1973

Event-sequence detector

Detector consists of matrix of storage elements which are activated by coincidence of failure-voltage pulses and clock pulses. Clock frequency used for event sequence detector can be selected to provide time resolution demanded by test at hand.

Hanna, M. F.↗

NASA NTRS1966

Solid state circuit controls direction, speed, and braking of dc motor

Full-wave bridge rectifier circuit controls the direction, speed, and braking of a dc motor. Gating in the circuit of Silicon Controlled Rectifiers /SCRS/ controls output polarity and braking is provided by an SCR that is gated to short circuit the reverse voltage generated by reversal of motor rotation.

Hanna, M. F.↗