Engineering topics
Publications and source records attributed to Harstad, K. G..
A statistical formulation is described protraying the composition in an evaporating multicomponent-fuel liquid drop and in the gas phase surrounding it.
A statistical formulation is described portraying the composition in an evaporating multi-component-fuel liquid drop and in the gas phase surrounding it.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Results from Direct Numerical Simulations of temporal, supercritical mixing layers for two species systems are analyzed to elucidate species-specific turbulence aspects. The two species systems, O2/H2 and C7HG16/N2, have different thermodynamic characteristics; thus, although the simulations are performed at similar reduced pressure (ratio of the pressure to the critical pressure), the former system is dose to mixture ideality and has a relatively high solubility with respect to the latter, which exhibits strong departures from mixture ideality Due to the specified, smaller initial density stratification, the C7H16/N2 layers display higher growth and increased global molecular mixing as well as larger turbulence levels. However, smaller density gradients at the transitional state for the O2/H2 system indicate that on a local basis, the layer exhibits an enhanced mixing, this being attributed to the increased solubility and to mixture ideality. These thermodynamic features are shown to affect the irreversible entropy production (i.e. the dissipation), which is larger for the O2/H2 layer and is primarily concentrated in high density-gradient magnitude regions that are distortions of the initial density stratification boundary. In contrast, the regions of largest dissipation in the C7H16/N2 layer are located in high density-gradient magnitude regions resulting from the mixing of the two fluids.
A method is presented for an accurate noniterative, computationally efficient calculation of high pressure fluid mixture equations of state, especially targeted to gas turbines and rocket engines. Pressures above 1 bar and temperatures above 100 K are addressed. The method is based on curve fitting an effective reference state relative to departure funcitons formed using the Peng-Robinson cubic state equation. Fit parameters for H(sub 2), O(sub 2), N(sub 2), propane, n-heptane and methanol are given.
Training projectiles with axisymmetric ring cavities that produce intense tones in an airstream were shot in a straight-line trajectory. A ground-based microphone was used to obtain the angular distribution of sound intensity produced from the flying projectile. Data reduction required calculation of Doppler and attenuation factors. Also, the directional sensitivity of the ground-mounted microphone was measured and used in the data reduction. A rapid angular variation of sound intensity produced from the projectile was found that can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of short-range flight tests that yield acoustic data free of uncertainties associated with diffraction, reflection, and refraction at jet boundaries in free-jet tests.
An exact analytical solution is given to the problem of long-time propellant thermal response to a specified pressure oscillation. Coupling to the gas phase is made using the quasisteady Zeldovich-Novozhilov approximation. Explicit linear and lowest order (quadratic) nonlinear expressions for propellant response are obtained from the implicit nonlinear solutions. Using these expressions, response curves are presented for an ammonium perchlorate composite propellant and HMX monopropellant.
Training projectiles with nose ring cavities that produce intense whistles in stationary free-jet tests were shot in a relatively straight-line trajectory. A ground based microphone was used to obtain the angular distribution of sound intensity produced from the subsonically flying projectile. Data reduction required calculation of Doppler and attenuation factors which were determined based on a non-linear trajectory. Also, the directional sensitivity of the microphone was measured and used in the data reduction. Significant angular variation of sound intensity produced from the projectile was found which can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of a real-time data acquisition system.
The various rate processes that govern the interpulse relaxation in metal vapor and metal halide vapor lasers are considered. Computer calculations indicate that the rapid metastable levels relaxation observed in copper and copper halide laser experiments requires the existence of a relatively small resonance in the cross section for metastable excitation or deexcitation near threshold. The accurate calculation of interpulse relaxation requires knowledge of rate constants presently not well known; this is especially so for metal halide lasers.
Measurements of the pulsed plasma thruster (PPT) plume upstream mass flux were made in the Molecular Sink (MOLSINK) vacuum facility in order to minimize the plume-tank wall reflected mass flux. Using specially designed collimators on 4 rows of Quartz Crystal Microbalanced (QCMs) mounted on a support extending radially away from the plume axis, measurements were made of the mass flux originating in a thin slice of the PPT primary plume at an arbitrary dip angle with respect to the thruster axis. The measured and analytically corrected mass flux from particles reflected from the MOLSINK walls was substracted from the collimated QCM measurements to improve their accuracy. These data were then analytically summed over dip angle to estimate the total plume backflow upstream of the thruster nozzle. The results indicate that the PPT backflow is of order 10 to the minus 10th power g/square cm/pulse in the region from 38 to 86 cm from the PPT axis in the nozzle exit plane. This flux drops with the square of the radial distance from the PPT axis and is comparable to the backflow of an 8 cm ion thruster, which has performance characteristics similar to those of the PPT.
The exhaust plume of a millipound pulsed plasma thruster has been investigated using a unique vacuum facility with cryogenically cooled low back-scatter chamber walls. The mass flux distribution of the plume was determined, with emphasis on the region upstream of the thruster. Measurements of the plume material scattered from the chamber walls were used with articulated collimator-quartz crystal microbalance measurements of the total flux to estimate the upstream flux originating in the plume. This flux was found to be of order 10 to the minus 10 g/sq cm/ pulse and to vary approximately with the inverse square of the radius. Measurements indicate the directed plume is essentially axisymmetric with a slight elongation in the direction parallel to the interelectrode gap. This downstream flux decreases with radius along a Gaussian profile with 90% of the plume confined to a 40 deg half-angle cone.
The isotope U235 is separated from a gasified isotope mixture of U235 and U238 by selectively exciting the former from the ground state utilizing resonant absorption of radiation from precisely tuned lasers. The excited isotope is then selectively ionized by electron bombardment. It then is separated from the remaining isotope mixture by electromagnetic separation.
A detailed computer model for the rate kinetics of an atomic vapor laser excited by electrical discharge is proposed. The model equations are defined and the computer program structure is discussed.
A computer calculation was made of the relaxation time to steady-state nucleation in a supersaturated vapor. A binary-collision model of nucleation based on classical liquid-drop thermodynamics was used. The nondimensional nucleation relaxation time is plotted as a function of the critical drop size for various values of the surface-tension parameter. The curves permit a rough estimation of the limit of the validity of steady-state nucleation theory.
The theory of homogeneous condensation is reviewed and equations describing this process are presented. Numerical computer solutions to transient problems in nucleation (relaxation to steady state) are presented and compared to a prior computation.
Results are presented of numerical computer calculations of dispersive wave growth rates in slightly ionized plasmas. The effects of employing a plasma model with detailed consideration of rate and radiative processes involving the electron quantum states were studied. Acoustic and electrothermal waves in unseeded argon are found to be frozen with the latter damped. Rate thermal modes can exhibit large growth. Mode mixing and switching in both seeded and unseeded argon are demonstrated.