Search NASA⌕ Search

Engineering topics

Hernandez, Sonia

Publications and source records attributed to Hernandez, Sonia.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Analysis and Design of Abort Options for Low Energy LandingTrajectories

Low energy trajectories that enable spacecraft landing on airless bodies using minimum propellant consumption are currently being proposed to support various mission proposals.However, this direct approach to landing poses a risk because the abort options are limited and time-sensitive. A way to deal with this limitation is to declare the approach to landing a critical event, i.e., it must happen as planned or the entire mission is compromised. However,with the appropriate tools and techniques, a number of abort options can be identified, yielding a much more robust design. In this study, multi-body dynamics techniques are exploited to design abort trajectories for low energy transfers, using Earth’s Moon and Jupiter’s moon Europa as examples. As a result, periodic structures are identified for staging purposes in case of emergency, and the propellant cost associated with entering and departing these orbits prior to landing is evaluated.

Hernandez, Sonia↗
NASA NTRS2021

Nonlinear Navigation Analysis for a Europa Lander Mission Concept

Navigation strategies typically use linearized techniques to predict maneuver statistics. This method has been successfully employed on numerous high-energy trajectories, but may not be valid for low-energy ones due to the highly non-linear environment. We explore nonlinear navigational techniques applied to a Europa Lander concept by assessing trajectory sensitivity. The linearity assumption is tested at different phases of the endgame trajectory. Maneuver strategies and placement are considered to improve the delivery to Europa. Several cases of non-linear statistical maneuver Monte Carlo simulations are conducted to optimize maneuvers and compare ∆V statistics against conventional linear simulations.

Hernandez, Sonia↗
NASA NTRS2021

Two-Spacecraft Orbiting in Opposition to Enable Bistatic Radar Observations Around an Asteroid

Fundamental answers about the origin and evolution of the Solar System hinge on our ability to image in detail the 3D interior structure of small bodies at highresolution. By collecting radar measurements we can ultimately create 3D maps of the interior structure. In this study we focus our attention on a specific mission scenario which consists of a carrier spacecraft and two daughter spacecraft sent to orbit the asteroid Apophis. The orbits of the spacecraft are optimized to maximize radar measurements by dynamically modeling the harmonics and solar radiation pressure. For long mission durations, orbital correction maneuvers maintain the spacecraft in formation.

Anderson, Rodney L.↗
NASA NTRS2021

I’ll have the Porter: Interactively Visualizing the Results of Statistical Maneuver Analysis

Mission design and navigation relies on statistical maneuver analysis and Monte Carlo simulations when evaluating candidate mission trajectories. Engineers must analyze large quantities of data to optimize mission safety and propellant margins, but currently rely on static text files and dense PDF slide decks to review simulation results. This approach is time-intensive, non-interactive, and difficult to share or coordinate with other mission designers. To improve this process, we present Porter: a web-based interactive mission analysis tool. This work describes Porter’s user-centered design process, its processing pipeline for importing and processing LAMBIC simulation data, core interactive features, and preliminary user feedback.

Ramaswamy, Basak Alper↗
NASA NTRS2019

Connecting resonant trajectories to a Europa capture through Lissajous staging orbits

The current interest in studying the surface of Europa in search of biosignatures demands efficient strategies in mission design to reach this distant world. An affordable strategy is to use a low energy moon tour, which has natural access to the moon via the L2 gateway. Staging around this libration point allows to decouple the approaching moon tour and the landing trajectory, which enables the option of designing each phase separately. Furthermore, a staging step frees the landing time from the capture phase, adding an additional degree of freedom. Lissajous orbits are the dynamical structures used for these staging orbits. In this paper, the possible ballistic connections between the resonances from the moon tour and Lissajous orbits are studied, including the different geometries that allow for time phasing control.

Anderson, Rodney L.↗
NASA NTRS2018

Flying Cassini Through the Grand Finale Orbits: Prediction vs. Reality

After twenty years of successful mission operations and invaluable scientific discoveries, the Cassini orbiter completed its tour around the Saturnian system on the most complex gravity-assist trajectory ever flown. The end-of-mission target of September 15, 2017 was achieved by preserving propellant at the expense of minimizing maneuver cycles. A navigation a strategy that incorporated orbit trim maneuvers was developed years in advance to maintain position dispersions below 250 km (1σ) at three specific periapses. This paper reports on the actual maneuver performance and overall trajectory control to maintain the Grand Finale orbits, highlighting the differences between predicted and implemented values.

Roth, Duane↗
NASA NTRS2017

Low Excess Speed Triple Cyclers of Venus, Earth, and Mars

Ballistic cycler trajectories which repeatedly encounter Earth and Mars may be invaluable to a future transportation architecture ferrying humans to and from Mars. Such trajectories which also involve at least one flyby of Venus are computed here for the first time. The so-called triple cyclers are constructed to exhibit low excess speed on Earth-Mars transit legs, and thereby reduce the cost of hyperbolic rendezvous. Numerous solutions are identified with average transit leg excess speed below 5 kilometers per second, independent of encounter epoch. The energy characteristics are lower than previously documented cyclers not involving Venus, but the repeat periods are generally longer.

Jones, Drew Ryan↗
NASA NTRS2017

Cassini Maneuver Experience Through the Final Targeted Titan Flyby and the Grand Finale

Amassing valuable scientific information about the Saturnian system for 13 years, the Cassini spacecraft is now in the last phase of its mission. The Grand Finale, a series of 22 orbits with Cassini passing through a gap between Saturn’s innermost ring and its upper atmosphere, began after the last targeted Titan flyby on April 22, 2017 and ends with the spacecraft plunging into Saturn on September 15, 2017. This paper reports on the maneuvers performed to achieve the final targeted Titan encounter and the maneuvers used to maintain the Grand Finale orbits.

Wong, Mau C.↗
NASA NTRS2017

Satellite Constellation Orbit Design to Enable a Space-Based Radio Interferometer

Two different design methods for a networked constellation of N small satellites are presented. In the first method, the (linear) Clohessy-Wilthsire equations are used as an initial design tool, followed by conversion to a two-body model. Discrepancies between the linear and nonlinear solutions are minimized in the conversion process. The second method utilizes invariant manifold theory, by perturbing a reference trajectory in different directions along the center eigenvectors. Both methods require 5N parameters to fully define a constellation. In a relative, rotating frame of the reference path, the spacecraft appear as periodic ellipses of varying sizes. Deployment, reconfiguration using propulsive maneuvers, and station keeping costs for an example mission scenario are addressed.

Chien, Steve A.↗
NASA NTRS2017

Families of Io-Europa-Ganymede Triple Cyclers

Ballistic cycler trajectories that repeatedly encounter the Jovian moons Io, Europa, and Ganymede are investigated. The 1:2:4 orbital resonance among these moons allows for trajectories that periodically fly by the three bodies, and, in an ideal world, can repeat indefinitely. An initial search method is implemented to determine if the location of the moons in a specific geometry can give way to a possible cycler. Lambert’s problem is then solved to determine the legs connecting consecutive encounters, allowing a maneuver at periapsis of the encounter if necessary. Families of solutions are classified by synodic period, and conversion to high fidelity model is outlined.

Jesick, Mark↗