Search NASA⌕ Search

Engineering topics

Heyden, Andreas

Publications and source records attributed to Heyden, Andreas.

At least 55 records · Page 3

Direct Oxidation of Methane to Methanol Enabled by Electronic Atomic Monolayer–Metal Support Interaction

Direct, catalytic oxidation of methane to methanol (MTM) with molecular oxygen is a highly desirable process to valorize methane. We propose that Rh-doped graphene (GR) supported on Ni(111) can be a promising catalyst for MTM with appreciable activity and selectivity. In the absence of the Ni(111) support, a MTM process is difficult. The catalytic activity of the Rh-doped GR is enabled by the Ni(111) support that covalently binds the Rh-doped GR and significantly modifies its properties, leading to facile O 2 activation by the synergy of the Rh dopant and the neighboring carbon atom of GR. The highly activated O 2 and the Rh dopant in turn activate CH 4 . Strikingly, the methane C–H bond breaking is preferred over methanol C–H bond breaking at 473 K. Here, the strong interaction between TM-doped GR and Ni(111) is found to be a general mechanism for regulating the adsorption strength of various molecules, providing important insight for tuning the properties of single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Adsorption Energies for Chemical Species on Metal Catalyst Surfaces Using Machine Learning

Computational catalyst screening has the potential to significantly accelerate heterogeneous catalyst discovery. Typically, this involves developing microkinetic reactor models that are based on parameters obtained from density functional theory and transition-state theory. To reduce the large computational cost involved in computing various adsorption and transition-state energies of all possible surface states on a large number of catalyst models, linear scaling relations for surface intermediates and transition states have been developed that only depend on a few, typically one or two descriptors, such as the carbon atom adsorption energy. As a result, only the descriptor values have to be computed for various active site models to generate volcano curves in activity or selectivity. Unfortunately, for more complex chemistries the predictability of linear scaling relations is unknown. Also, the selection of descriptors is essentially a trial and error process. Here, using a database of adsorption energies of the surface species involved in the decarboxylation and decarbonylation of propionic acid over eight monometalic transition-metal catalyst surfaces (Ni, Pt, Pd, Ru, Rh, Re, Cu, Ag), we tested if nonlinear machine learning (ML) models can outperform the linear scaling relations in prediction accuracy when predicting the adsorption energy for various species on a metal surface based on data from the rest of the metal surfaces. We found linear scaling relations to hold well for predictions across metals with a mean-absolute error of 0.12 eV, and ML methods being unable to outperform linear scaling relations when the training dataset contains a complete set of energies for all of the species on various metal surfaces. Only when the training dataset is incomplete, namely, contains a random subset of species’ energies for each metal, a currently unlikely scenario for catalyst screening, do kernel-based ML models significantly outperform linear scaling relations. We also found that simple coordinate-free species descriptors, such as bond counts, achieve as good results as sophisticated coordinate-based descriptors. Finally, we propose an approach for automatic discovery of appropriate metal descriptors using principal component analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling reaction pathways of selective C–O bond cleavage of glycerol

The selective hydrodeoxygenation (HDO) reaction is desirable to convert glycerol into various value-added products by breaking different numbers of C–O bonds while maintaining C–C bonds. Here we combine experimental and density functional theory (DFT) results to reveal that the Cu modifier can significantly reduce the oxophilicity of the molybdenum carbide (Mo 2 C) surface and change the product distribution. The Mo 2 C surface is active for breaking all C–O bonds to produce propylene. As the Cu coverage increases to 0.5 monolayer (ML), the Cu/Mo 2 C surface shows activity towards breaking two C–O bonds and forming ally-alcohol and propanal. As the Cu coverage further increases, the Cu/Mo 2 C surface cleaves one C–O bond to form acetol. DFT calculations reveal that the Mo 2 C surface, Cu-Mo interface, and Cu surface are distinct sites for the production of propylene, ally-alcohol, and acetol, respectively. This study explores the feasibility of tuning the glycerol HDO selectivity by modifying the surface oxophilicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid-Phase Modeling in Heterogeneous Catalysis

The notion that solvents can affect the chemical reactivity has been prevalent in the homogeneous catalysis community, going back as far as 1863.(1) Remarkable changes in reaction rate have been reported in the seminal work of Menschutkin, who demonstrated a change in reaction rate constant up to a factor of 700 as a function of the solvents employed for the reaction of triethylamine with ethyl iodide at 373 K.(2) It is well-known nowadays that solvents can affect the reaction rate, reaction mechanism, and selectivity of chemical reactions occurring in condensed phase. While solvent effects usually lead to changes in reaction rates of up to 3 orders of magnitude, rate increases of 9 orders of magnitude have been reported.(3, 4) In homogeneous metal catalysis such as hydroformylation, hydrogenation, and cross-coupling reactions, solvent effects have been studied systematically and exploited for industrial applications.(5) Substantial solvent effects have also been reported in heterogeneous catalysis for several hydrogenation,(6-9) oxidation,(10-12) and electrochemical reactions (where electric field effects lead in addition to an electric double layer(13-16)). However, in heterogeneous catalysis, systematic studies of solvation effects are rare, and solvent effects are generally not well understood. In this context, we note that liquid-phase processing is highly desirable for process cost reduction and high product selectivity for the heterogeneously catalyzed conversion of highly functionalized lignocellulosic biomass, because the feedstocks contain significant amounts of water, are produced in aqueous-phase environments, and reactant molecules are highly water-soluble, reactive, and thermally unstable.(17-19) Processing at relatively low temperatures in condensed phase has therefore the potential to (1) minimize undesirable thermal degradation reactions, (2) increase the targeted product selectivity, and (3) facilitate the product separation from excess water because reaction products often contain less oxygen and are therefore less hydrophilic than the feed streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic study of the ceria supported, re-catalyzed deoxydehydration of vicinal OH groups

Deoxydehydration (DODH) is an emerging biomass deoxygenation process whereby vicinal OH groups are removed. Based on DFT calculations and microkinetic modeling, we seek to understand the mechanism of the Re-catalyzed deoxydehydration supported on CeO 2 (111). In addition, we aim at understanding the promotional effect of Pd in a heterogeneous ReO x –Pd/CeO 2 DODH catalyst system. We disentangle the contribution of the oxide support, the oxide-supported single ReO x species, and a co-adsorbed Pd promoter that has no direct interaction with the Re species. In the absence of a nearby Pd cluster, a Re site is able to reduce subsurface Ce-ions of a hydroxylated CeO 2 (111) surface, leading to a catalytically active Re +6 species. The effect of Pd is twofold: (i) Pd catalyzes the hydrogen dissociation and spillover onto CeO 2 , which is an indispensable process for the regeneration of the Re catalyst, and (ii) Pd adsorbed in close proximity to Re on CeO2(111) facilitates the oxidation of Re to a +7 oxidation state, which leads to an even more active Re species than the Re +6 site present in the absence of Pd. The latter promotional effect of Pd (and change in oxidation state of Re) disappears with increasing Pd–Re distance and in the presence of oxygen defects on the ceria support. Under these conditions, the ReO x –Pd/CeO 2 catalyst system exhibits appreciable activity consistent with recent experiments. The established mechanism and role of various species in the catalyst system help to better understand the deoxydehydration catalysis. Also, the importance of the Re oxidation state and the identified oxidation state modification mechanisms suggest a new pathway for tuning the properties of metal-oxide supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Titania-Supported Single-Atom Platinum Catalyst for Water-Gas Shift Reaction

Density functional theory (DFT) and microkinetic modeling are used to examine the water-gas shift (WGS) reaction on TiO 2 (110)-supported single Pt atoms. A CO-adsorbed Pt atom supported on a TiO 2 surface exhibits a lower activity for the WGS than the Pt 2+ ion supported on a doped TiO 2 surface, although DFT predicts the CO-adsorbed Pt on an undoped TiO 2 surface to be thermodynamically more stable. Finally, trends observed in WGS activity for different active sites of TiO 2 -supported Pt catalysts can be explained in terms of CO adsorption strength and the ability to form an oxygen vacancy on the oxide support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Angelica Lactone Formation in the Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over a Ru(0001) Model Surface

Using mean-field microkinetic modeling with parameters derived from density functional theory calculations and harmonic transition state theory, we investigated the steady-state catalytic hydrodeoxygenation of levulinic acid (LA) to γ-valerolactone (GVL) on a Ru(0001) model surface. Focusing on the importance of intramolecular esterification of LA to its stable derivative α-angelica lactone (AGL) during the HDO to GVL, we studied various reaction pathways for GVL production that involve AGL and 4-hydroxypentanoic acid (HPA). We find that in a nonpolar reaction environment these pathways are not kinetically relevant but that GVL can be produced from LA by a single hydrogenation step, followed by ring closure and C–OH bond cleavage. However, AGL reaction pathways lead to surface poisoning at temperatures above 423 K when these pathways become kinetically accessible. As a result of surface poisoning—possibly at low temperatures by hydrogen and at high temperatures by AGL derivatives—we observe two different activity regimes characterized by significantly different activation barriers. Finally, simulation results agree well with experimental observations except at low temperatures of 323 K where our model significantly underestimates the turnover frequency, questioning whether Ru(0001) sites are active at these low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic properties of bimetallic metal–organic frameworks (MOFs): Tailoring the density of electronic states through MOF modularity

The development of porous well-defined hybrid materials (e.g., metal-organic frameworks or MOFs) will add a new dimension to a wide number of applications ranging from supercapacitors and electrodes to 'smart' membranes and thermoelectrics. From this perspective, the understanding and tailoring of the electronic properties of MOFs are key fundamental challenges that could unlock the full potential of these materials. In this work, we focused on the fundamental insights responsible for the electronic properties of three distinct classes of bimetallic systems, M x-y M' y -MOFs, M x M' y - MOFs, and M x (ligand-M' y )-MOFs, in which the second metal (M') incorporation occurs through (i) metal (M) replacement in the framework nodes (type I), (ii) metal node extension (type II), and (iii) metal coordination to the organic ligand (type III), respectively. We employed microwave conductivity, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, powder X-ray diffraction, inductively coupled plasma atomic emission spectroscopy, pressed-pellet conductivity, and theoretical modeling to shed light on the key factors responsible for the tunability of MOF electronic structures. Experimental prescreening of MOFs was performed based on changes in the density of electronic states near the Fermi edge, which was used as a starting point for further selection of suitable MOFs. As a result, we demonstrated that the tailoring of MOF electronic properties could be performed as a function of metal node engineering, framework topology, and/or the presence of unsaturated metal sites while preserving framework porosity and structural integrity. Finally, these studies unveil the possible pathways for transforming the electronic properties of MOFs from insulating to semiconducting, as well as provide a blueprint for the development of hybrid porous materials with desirable electronic structures.

36 MATERIALS SCIENCE↗

Water-Gas Shift Activity of Atomically Dispersed Cationic Platinum versus Metallic Platinum Clusters on Titania Supports

Atomically dispersed supported metal catalysts offer unique opportunities for designing highly selective catalysts and maximizing the utility of precious metals that have potential applications in a wide variety of industrial chemical reactions. While substantial advances in understanding the origin of the activity of such highly dispersed metal catalysts have been made for a few chemical reactions, the reaction mechanisms and the nature of the active site—small metal clusters versus single atoms—are still highly debated. Using a combination of density functional theory and microkinetic modeling, we confirm that a positively charged single Pt atom on TiO 2 (110) can exhibit a very high low-temperature activity for the water-gas shift reaction (TOF > 0.1 s –1 at 473 K). A comparison of these findings with our work on TiO 2 -supported Pt cluster models provides clear evidence that different active sites are responsible for the experimentally observed activity at low and high temperatures. Lastly, we explain why contradictory experimental conclusions have been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Investigation of the Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Ru(0001)

The reaction mechanism of the hydrodeoxygenation (HDO) of levulinic acid (LA) to γ-valerolactone (GVL) has been investigated over a Ru(0001) model surface by a combination of plane-wave density functional theory (DFT) calculations and mean-field microkinetic modeling. Catalytic pathways involving the direct hydrogenation of LA to GVL with and without formation of the experimentally proposed 4-hydroxypentanoic acid (HPA) intermediate have been considered. In the low reaction temperature range of 323–373 K, the activity of the model Ru(0001) surface is low, owing to a very small number of free sites available for catalysis. As an effect, it is unlikely that Ru(0001) is the active site for the experimentally observed catalysis at low temperatures. In contrast, in the medium- to high-temperature range (423–523 K), the HDO of LA is facile over Ru(0001) and we predict at 423 K a turnover frequency, apparent activation barrier, and forward reaction orders that are fairly close to prior experimental observations, leading us to suggest that Ru(0001) sites might constitute the active site for high-temperature catalysis. Lastly, our microkinetic analysis indicates that the HDO of LA occurs by LA adsorption, hydrogenation of LA to an alkoxy intermediate, surface ring closure, and –OH group removal: i.e., it does not occur via HPA production as previously suggested. The first hydrogenation step of LA toward the formation of an alkoxy intermediate is the most rate controlling step over Ru(0001).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ethylene glycol reforming on Pt(111): first-principles microkinetic modeling in vapor and aqueous phases

First-principles, periodic density functional theory (DFT) calculations and mean-field microkinetic modeling have been used to investigate the decomposition of ethylene glycol for hydrogen production on Pt(111) in vapor and aqueous phases. All dehydrogenated species derived from ethylene glycol (C 2 H x O 2 , x = 0–6) and methanol (CH y O, y = 0–4), and all elementary C–C, C–H, and O–H bond breaking steps are included in the microkinetic model. Reaction path analysis in vapor phase indicates that both initial C–H and O–H dehydrogenation steps are kinetically relevant at all temperatures (470–530 K). Initial O–H bond cleavage is reversible at low temperatures but accounts for an increasingly dominant fraction of the total reaction flux at higher temperatures. C–C bond scission is observed only after significant dehydrogenation (x ≤ 3) and is more likely to happen in surface intermediates where one of the cleavage products is CO. Here, the process is highly selective to the production of H2 compared to methanol. For aqueous-phase model development, free energies of solvation were computed for all surface intermediates and transition states using a continuum solvation approach. Our aqueous-phase microkinetic model predicts a 0.4 eV lower apparent activation energy and an order of magnitude larger turnover frequencies. Initial C–H bond cleavage becomes more important but the general trends are similar to the vapor phase, suggesting that the reaction chemistry is similar in both vapor and aqueous phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

β-O-4 Bond Cleavage Mechanism for Lignin Model Compounds over Pd Catalysts Identified by Combination of First-Principles Calculations and Experiments

Lignin in lignocellulosic biomass is the only renewable source for aromatic compounds, and effective valorization of lignin remains a significant challenge in biomass conversion processes. Here, we have performed density functional theory calculations and experiments to investigate the cleavage mechanism of the C–O ether bond in the lignin model compound 2-phenoxy-1-phenylethanol with a β-O-4 linkage over a Pd(111) catalyst surface model. We propose the favorable reaction pathway to proceed as follows: the dilignol reactant gets dehydrogenated first on the α-carbon and then on the -OH group to generate its corresponding ketone 2-phenoxy-1-phenylethanone; the ketone continues to get dehydrogenated on the β-carbon by first a equilibrated keto–enol tautomerization to its enol form and then -OH dehydrogenation; finally, the C–O ether bond cleavage happens afterward, leading to one-aromatic-ring surface intermediates followed by hydrogenation to yield acetophenone and phenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvation Effects in the Hydrodeoxygenation of Propanoic Acid over a Model Pd(211) Catalyst

The effects of liquid water and 1,4-dioxane on the hydrodeoxygenation of propionic acid over Pd(211) model surfaces have been studied from first principles. Here, a microkinetic model with parameters obtained from density functional theory and implicit solvation models was developed to study the effects of these solvents on the reaction mechanism and kinetic parameters. In the presence of water, dehydrogenated derivatives of propionic acid and propionate are stabilized, and a new decarboxylation mechanism involving CH 3 CCOOH surface species is facilitated, leading to a higher decarboxylation rate. However, stronger adsorption of CO in the presence of liquid water resulted in fewer free sites and an overall lower turnover frequency. By contrast, in the presence of 1,4-dioxane, the most dominant decarboxylation pathway does not involve a dehydrogenated propionate species, but propionate goes through decarboxylation to form CO 2 and C 2 fragments very similar to the mechanism in the gas phase. Again, in the presence of 1,4-dioxane, CO adsorbs more strongly, and fewer free sites are available for catalysis, leading to a slightly smaller turnover frequency. In all reaction environments, we observed that the decarbonylation mechanism is slightly preferred over the decarboxylation mechanism and that C–OH bond cleavage is the most rate-controlling step followed by α-carbon dehydrogenation steps and (in liquid water) decarboxylation of dehydrogenated derivatives. Comparing solvent effects over Pd(211) with those over Pd(111), we observe that the free site coverage is reduced in the presence of solvents on all Pd surfaces, which reduces the activity of Pd(211). In addition, elementary steps that involve a carboxyl/carboxylate group changing its orientation from the surface to the liquid phase, such as the dehydrogenation of propionate, are significantly facilitated such that liquid water increased the activity of Pd(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent effects in the liquid phase hydrodeoxygenation of methyl propionate over a Pd(1 1 1) catalyst model

Solvation effects of liquid water and 1,4-dioxane have been studied from first principles for the hydrodeoxygenation of methyl propionate over a Pd(1 1 1) catalyst surface model. Microkinetic reaction models have been developed for various reaction environments to study the effects of solvents on the reaction mechanism. Our models predict that in all reaction environments, decarbonylation pathways are favored over decarboxylation pathways. However, in the presence of liquid water the decarboxylation mechanism is facilitated due to solvent stabilization of the dehydrogenated derivatives of propionate. Altogether, the activity of Pd(1 1 1) is one order of magnitude lower in water than in 1,4-dioxane where we predict the activity to be very similar to the vapor phase. The decrease in Pd(1 1 1) activity due to liquid water can be traced back to the Pd surface being more crowded and propanoyl–methoxy type dissociations becoming more difficult. Propanoyl–methoxy type dissociations also become more rate controlling in liquid water than the dehydrogenation steps that are most rate controlling in 1,4-dioxane and in the vapor phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Investigation of the Reaction Mechanism of the Guaiacol Hydrogenation over a Pt(111) Catalyst

The reaction mechanism of the mild hydrogenation of guaiacol over Pt(111) has been investigated by density functional theory calculations and microkinetic modeling. Our model suggests that at 573 K, catechol is the preferred reaction product and that any deoxygenation to, for example, phenol or benzene is at least 4 orders of magnitude slower than the production of catechol. Slow deoxygenation of guaiacol can occur by decarbonylation and possibly by hydrogenation of the phenyl ring followed by C–OH bond cleavage. Direct –OH removal without activation of the phenyl ring is found to be at least 5 orders of magnitude slower. Altogether, this study suggests that Pt(111) sites are not active deoxygenation sites and that the experimentally observed deoxygenation activity of Pt catalysts originates likely from the involvement of the catalyst support or Pt step and corner sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗