Search NASA⌕ Search

Engineering topics

Heyden, Andreas

Publications and source records attributed to Heyden, Andreas.

At least 73 records · Page 4

Theoretical investigation of the decarboxylation and decarbonylation mechanism of propanoic acid over a Ru(0 0 0 1) model surface

The hydrodeoxygenation of organic acids is often found to be a rate-controlling process during upgrading of biomass feedstocks into fuels. We developed a microkinetic model based on data obtained from density functional theory calculations for the decarboxylation and decarbonylation mechanisms of propanoic acid (CH 3 CH 2 COOH) over a Ru(0 0 0 1) model surface. The model predicts that the decarbonylation mechanism is two orders of magnitude faster than the decarboxylation mechanism. The most favorable decarbonylation pathway proceeds via removal of the acid –OH group to produce propanoyl (CH 3 CH 2 CO) followed by C–CO bond scission of propanoyl to produce CH 3 CH 2 and CO. Finally, CH 3 CH 2 is hydrogenated to CH 3 CH 3 . Dehydrogenation reactions that have been observed to be important over Pd catalysts play no role over Ru(0 0 0 1), and a sensitivity analysis indicates that removal of the acid –OH group is the rate-controlling step in the deoxygenation. Altogether, our results suggest that to improve the Ru catalyst performance for the decarbonylation of organic acids, the free site coverage needs to be increased by, for example, adding a catalyst promoter that decreases the hydrogen and CO adsorption strength (without significantly affecting the C–OH bond scission rate), or by raising the reaction temperature and operating at relatively low CO and H 2 partial pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical investigation of the reaction mechanism of the hydrodeoxygenation of guaiacol over a Ru(0 0 0 1) model surface

The reaction mechanism of the hydrodeoxygenation of guaiacol to aromatic products has been studied by density functional theory calculations and microkinetic modeling over a Ru(0 0 0 1) model surface. Our model suggests that the dominant hydrodeoxygenation pathway proceeds via O–H bond cleavage of guaiacol, C 6 H 4 (OH)(OCH 3 ), to C 6 H 4 (O)(OCH 3 ), followed by dehydrogenation of the methoxy group to C 6 H 4 (O)(OC), decarbonylation to C 6 H 4 O, and finally hydrogenation to phenol. At the adsorbed C 6 H 4 (O)(OCH) intermediate, a competitive deoxygenation pathway is identified, which involves methyne group removal to C 6 H 4 O 2 , followed by hydrogenation to C 6 H 4 (OH)(O), dehydroxylation to C 6 H 4 O, and finally hydrogenation to phenol. In agreement with experimental results, phenol is predicted to be the major product and catechol is the most relevant minority side product. Further deoxygenation of phenol to benzene is found to be slow. Lastly, computations predict the last dehydrogenation step of the methoxy species in guaiacol to be at least partially rate controlling over Ru(0 0 0 1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Investigation of H₂ Oxidation on the Sr 2 Fe 1.5 Mo 0.5 O 6 (001) Perovskite Surface Under Anodic Solid Oxide Fuel Cell Conditions

Periodic density functional theory (DFT) calculations and microkinetic modeling are used to investigate the electrochemical oxidation of H₂ fuel on the (001) surface of Sr 2 Fe 1.5 Mo 0.5 O 6 (SFMO) perovskite under anodic solid oxide fuel cell conditions. Three surface models with different Fe/Mo ratios in the topmost layer-identified by ab initio thermodynamic analysis-are used to investigate the H₂ oxidation mechanism. A microkinetic analysis that considers the effects of anode bias potential suggests that a higher Mo concentration in the surface increases the activity of the surface toward H₂ oxidation. At operating voltage and anodic SOFC conditions, the model predicts that water desorption is rate-controlling and that stabilizing the oxygen vacancy structure increases the overall rate for H₂ oxidation. Although we find that Mo plays a crucial role in improving catalytic activity of SFMO, under fuel cell operating conditions, the Mo content in the surface layer tends to be very low. On the basis of these results and in agreement with previous experimental observations, a strategy for improving the overall electrochemical performance of SFMO is increasing the Mo content or adding small amounts of an active transition metal, such as Ni, to the surface to lower the oxygen vacancy formation energy of the SFMO surface.

Environmental Molecular Sciences Laboratory↗

Hybrid Quantum Mechanics/Molecular Mechanics Solvation Scheme for Computing Free Energies of Reactions at Metal–Water Interfaces

We report the development of a quantum mechanics/molecular mechanics free energy perturbation (QM/MM-FEP) method for modeling chemical reactions at metal-water interfaces. This novel solvation scheme combines planewave density function theory (DFT), periodic electrostatic embedded cluster method (PEECM) calculations using Gaussian-type orbitals, and classical molecular dynamics (MD) simulations to obtain a free energy description of a complex metal-water system. We derive a potential of mean force (PMF) of the reaction system within the QM/MM framework. A fixed-size, finite ensemble of MM conformations is used to permit precise evaluation of the PMF of QM coordinates and its gradient defined within this ensemble. Local conformations of adsorbed reaction moieties are optimized using sequential MD-sampling and QM-optimization steps. An approximate reaction coordinate is constructed using a number of interpolated states and the free energy difference between adjacent states is calculated using the QM/MM-FEP method. By avoiding on-the-fly QM calculations and by circumventing the challenges associated with statistical averaging during MD sampling, a computational speedup of multiple orders of magnitude is realized. The method is systematically validated against the results of ab initio QM calculations and demonstrated for C–C cleavage in double-dehydrogenated ethylene glycol on a Pt (111) model surface.

Chemical calculations↗

On the Importance of the Associative Carboxyl Mechanism for the Water-Gas Shift Reaction at Pt/CeO 2 Interface Sites

Periodic density functional theory calculations and microkinetic modeling are used to investigate the associative carboxyl pathways of the water-gas shift (WGS) reaction at the Pt/CeO 2 (111) interface. Analysis of a microkinetic model based on parameters obtained from first principles suggests that the turnover frequencies for the CO-assisted associative carboxyl mechanism are comparable to experimental results. However, this microkinetic model containing various associative carboxyl pathways at interface sites cannot explain the experimentally observed activation barriers and reaction orders of Pt/CeO 2 catalysts. Considering furthermore that a model of an associative carboxyl mechanism with redox regeneration, also derived from first principles and recently published by us, accurately predicts all kinetic parameters while displaying a 2 orders of magnitude higher turnover frequency, we conclude that at Pt/CeO 2 interface sites, the WGS reaction follows a bifunctional Mars-van Krevelen mechanism in which support oxygen vacancies facilitate water dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Importance of Metal–Oxide Interface Sites for the Water–Gas Shift Reaction Over Pt/CeO2 Catalysts

The mechanism of water–gas shift reaction at the three-phase boundary of Pt/CeO2 catalysts has been investigated using density functional theory and microkinetic modeling to better understand the importance of metal–oxide interface sites in heterogeneous catalysis. Analysis of a microkinetic model based on parameters obtained from first principles suggests that both the “Redox pathway” and the “Associative carboxyl pathway with redox regeneration” could operate on Pt/CeO2 catalysts. Although (1) only few interfacial Pt atoms are found to be catalytically active at low temperatures due to strong adsorption of CO and (2) interfacial O–H bond breakage is difficult due to the high reducibility of ceria, interface sites are 2–3 orders of magnitude more active than Pt (1 1 1) and stepped Pt surface sites and therefore effectively determine the overall activity of Pt/CeO2. The high activity of Pt/CeO2 interface sites originates from a significantly enhanced water activation and dissociation at interfacial oxygen vacancies.

Environmental Molecular Sciences Laboratory↗

Solvent effects on the hydrodeoxygenation of propanoic acid over Pd(111) model surfaces

The effects of liquid water, n-octane, and n-butanol on the hydrodeoxygenation of propanoic acid over Pd(111) model surfaces have been studied from first principles. We developed a microkinetic model for the hydrodeoxygenation and studied the reaction mechanism at a temperature of 473 K. Our model predicts that for all reaction media, decarbonylation pathways are favored over decarboxylation pathways. However, in the presence of polar solvents like water, decarboxylation routes become competitive with decarbonylation routes. The activity of the Pd surface varies as a function of the environment as follows: water > n-butanol > octane ≈ gas phase. Lastly, a sensitivity analysis of our models suggests that both C–OH and C–H bond cleavages control the overall rate of the catalyst in all environments and are likely to be activity descriptors for the hydrodeoxygenation of organic acids.

COSMO↗

Obtaining Mixed Ionic/Electronic Conductivity in Perovskite Oxides in a Reducing Environment: A Computational Prediction for Doped SrTiO3

The electronic conductivity and thermodynamic stability of mixed p- and n-doped SrTiO3 perovskites have been investigated under anodic solid oxide fuel cell conditions using density functional theory (DFT). In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability of various Ga- and La-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to determine the number of charge carriers and the degree of electronic conductivity. We find that a mixed ionic/electronic conductor can be obtained when doping SrTiO3 perovskite oxide with both p-type and n-type dopants. Calculations show that 10% Ga- and 20% La-doped SrTiO3 exhibit mixed ionic/electronic conductivity at high temperature and low oxygen partial pressure whereas doping with higher concentrations of Ga, e.g., 20%, diminishes the electronic conductivity of the material. Furthermore, changing the n-dopant from La (A-site) to Nb (B-site) does not significantly affect the reducibility and number of charge carriers in p- and n-doped SrTiO3. However, a higher degree of oxygen vacancy clustering is observed for the La-doped material which reduces the oxygen ion diffusion rate and traps electrons. Nevertheless, our findings suggest that independent of doping site, mixed ionic/ electronic conductivity can be obtained in SrTiO3 perovskite oxides under reducing conditions and high temperatures when using a mixed p- and n-type doping strategy that uses a p-dopant concentration smaller than the n-dopant concentration.

Environmental Molecular Sciences Laboratory↗

Synthesis and characterization of Mo-doped SrFeO 3-δ as cathode materials for solid oxide fuel cells

This paper demonstrates the potential application of Mo-doped SrFeO 3-δ perovskites as new cathode materials for solid oxide fuel cells (SOFCs). SrFe 1-x MoxO 3-δ (x = 0, 0.05, 0.1, 0.2 and 0.25) perovskite materials have been synthesized by a microwave-assisted combustion method. By doping with Mo, the electrical conductivity of the doped SrFeO 3-δ in air is reduced with increasing amounts of Mo. At 800 °C, the conductivity drops from about 62 to 22 S cm -1 when the doping level is increased to 25%. According to X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) results, a decrease in the concentration of charge carrier Fe 4+ ions may account for the decrease in electrical conductivity. In contrast, the resistance to sintering and tolerance to reduction of SrFeO 3-δ are improved by Mo-doping. Additionally, the thermal expansion coefficient at 800 °C drops from 40.8 × 10 -6 K -1 for SrFeO 3-δ to 25.7 × 10 -6 K -1 for SrFe 0.8 Mo 0.2 O 3-δ and 20.9 × 10 -6 K -1 for SrFe0.75Mo0.25O 3-δ . This significant decrease in the thermal expansion coefficient makes Mo-doped SrFeO 3-δ materials attractive as cathode candidates for SOFCs. Finally, a relatively low polarization resistance of 0.074 Ω cm2 is obtained for SrFe 0.8 Mo 0.2 O 3-δ at 800 °C in air.

25 ENERGY STORAGE↗

HeteroFoaM at USC

This video describes the HeteroFoam Center at USC.

30 DIRECT ENERGY CONVERSION↗

Nature of Ptn/TiO2(110) Interface under Water-Gas Shift Reaction Conditions: A Constrained ab Initio Thermodynamics Study

The electronic structure of small Ptn (n = 1-8) clusters supported on the stoichiometric and partially reduced rutile TiO2(110) surface have been investigated using density functional theory. Pt atoms prefer to form a close-packed structure with (111) facet near an oxygen vacancy of the TiO2 support and a less dense structure with (100) facet away from oxygen vacant sites. Themain focus of this study is on identifying a realistic catalyst model for the Pt/TiO2 interface under watergas shift (WGS) reaction conditions. Constrained ab initio thermodynamic simulations on the stability of oxygen vacancies and formation of adsorbed gas phase molecules such as oxygen, CO, and hydrogen at the metal/oxide interface reveal that under WGS reaction conditions the formation of surface oxygen vacancies are thermodynamically favorable, platinum oxide species (PtOx) can easily be reduced and should not be present, CO adsorbs only weakly on interfacial Pt atoms, and CO poisoning of these sites should be less important. While hydrogen generally interacts weakly with interfacial Pt atoms, it forms very stable hydride species on Pt atoms neighboring an oxygen vacancy of the TiO2(110) support, possibly negatively affecting the WGS reaction rate.

Environmental Molecular Sciences Laboratory↗