Search NASA⌕ Search

Engineering topics

Hirofumi Hashimoto

Publications and source records attributed to Hirofumi Hashimoto.

At least 19 records

What Does Global Land Climate Look Like at 2°C Warming?

Constraining an increase in global mean temperature below 2°C compared to pre-industrial levels is critical to limiting dangerous and cascading impacts of anthropogenic climate change. Understanding future climatic changes and their spatial heterogeneity at 2°C warming is thus important for policy makers to prepare actionable adaptation and mitigation plans by identifying where and to what extent lives and livelihoods will be impacted. This study uses the recently released NASA Earth eXchange Global Daily Downscaled Projections (NEX-GDDP) CMIP6 data to provide a broad overview of projected changes in six key climate variables and two climate impact indicators at a time when warming exceeds 2°C. Analysis of global mean temperature changes indicates the 2040s as the decade when most CMIP6 models reach 2°C warming with respect to a pre-industrial period (1850–1900). During the 2040s, we find that global mean temperature, precipitation, relative humidity, downwelling shortwave and longwave radiation, and wind speed over land under the high emission scenario are projected to change by +2.8°C, +22.4 mm/year, −0.73%, −2.23 , +15.9 W/m 2 , and −0.04 m/s, respectively. Many of the future changes are expected to exacerbate climate impacts including heat stress and fire danger. Our analysis shows geographic patterns of policy-relevant climatic changes, as parts of the globe will experience significant climate impacts even if the goal to keep warming below 2°C goal is achieved. Our results highlight the urgent need for further studies focused on identifying key hotspots and advancing region-specific actionable adaptation and mitigation plans.

GDDP↗

A Novel Atmospheric Correction Algorithm to Exploit the Diurnal Variability in Hypertemporal Geostationary Observations

This study developed a new atmospheric correction algorithm, GeoNEX-AC, that is independent from the traditional use of spectral band ratios but dedicated to exploiting information from the diurnal variability in the hypertemporal geostationary observations. The algorithm starts by evaluating smooth segments of the diurnal time series of the top-of-atmosphere (TOA) reflectance to identify clear-sky and snow-free observations. It then attempts to retrieve the Ross-Thick–Li-Sparse (RTLS) surface bi-directional reflectance distribution function (BRDF) parameters and the daily mean atmospheric optical depth (AOD) with an atmospheric radiative transfer model (RTM) to optimally simulate the observed diurnal variability in the clear-sky TOA reflectance. Once the initial RTLS parameters are retrieved after the algorithm’s burn-in period, they serve as the prior information to estimate the AOD levels for the following days and update the surface BRDF information with the new clear-sky observations. This process is iterated through the full time span of the observations, skipping only totally cloudy days or when surface snow is detected. We tested the algorithm over various Aerosol Robotic Network (AERONET) sites and the retrieved results well agree with the ground-based measurements. This study demonstrates that the high-frequency diurnal geostationary observations contain unique information that can help to address the atmospheric correction problem from new directions.

atmospheric correction↗

Emerging satellite observations for diurnal cycling of ecosystem processes

Diurnal cycling of plant carbon uptake and water use, and their responses to water and heat stresses, provide direct insight into assessing ecosystem productivity, agricultural production and management practices, carbon and water cycles, and feedbacks to the climate. Temperature, light, atmospheric water demand, soil moisture and leaf water potential vary over the course of the day, leading to diurnal variations in stomatal conductance, photosynthesis and transpiration. Earth observations from polar-orbiting satellites are incapable of studying these diurnal variations. Here, we review the emerging satellite observations that have the potential for studying how plant functioning and ecosystem processes vary over the course of the diurnal cycle. The recently launched ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) and Orbiting Carbon Observatory-3 (OCO-3) provide land surface temperature, evapotranspiration (ET), gross primary production (GPP) and solar-induced chlorophyll fluorescence data at different times of day. New generation operational geostationary satellites such as Himawari-8 and the GOES-R series can provide continuous, high-frequency data of land surface temperature, solar radiation, GPP and ET. Future satellite missions such as GeoCarb, TEMPO and Sentinel-4 are also planned to have diurnal sampling capability of solar-induced chlorophyll fluorescence. We explore the unprecedented opportunities for characterizing and understanding how GPP, ET and water use efficiency vary over the course of the day in response to temperature and water stresses, and management practices. We also envision that these emerging observations will revolutionize studies of plant functioning and ecosystem processes in the context of climate change and that these observations and findings can inform agricultural and forest management and lead to improvements in Earth system models and climate projections.

Plant functioning↗

First Provisional Land Surface Reflectance Product from Geostationary Satellite Himawari-8 AHI

A provisional surface reflectance (SR) product from the Advanced Himawari Imager (AHI) on-board the new generation geostationary satellite (Himawari-8) covering the period between July 2015 and December 2018 is made available to the scientific community. The Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm is used in conjunction with time series Himawari-8 AHI observations to generate 1-km gridded and tiled land SR every 10 minutes during day time. This Himawari-8 AHI SR product includes retrieved atmospheric properties (e.g., aerosol optical depth at 0.47μm and 0.51μm), spectral surface reflectance (AHI bands 1–6), parameters of the RTLS BRDF model, and quality assurance flags. Product evaluation shows that Himawari-8 AHI data on average yielded 35% more cloud-free, valid pixels in a single day when compared to available data from the low earth orbit (LEO) satellites Terra/Aqua with MODIS sensor. Comparisons of Himawari-8 AHI SR against corresponding MODIS SR products (MCD19A1) over a variety of land cover types with the similar viewing geometry show high consistency between them, with correlation coefficients (r) being 0.94 and 0.99 for red and NIR bands, respectively. The high-frequency geostationary data are expected to facilitate studies of ecosystems on daily to diurnal time scales, complementing observations from networks such as the FLUXNET.

Himawari-8 AHI↗

An Interplay between Photons, Canopy Structure, and Recollision Probability: A Review of the Spectral Invariants Theory of 3D Canopy Radiative Transfer Processes

Earth observations collected by remote sensors provide unique information to our ever-growing knowledge of the terrestrial biosphere. Yet, retrieving information from remote sensing data requires sophisticated processing and demands a better understanding of the underlying physics. This paper reviews research efforts that lead to the developments of the stochastic radiative transfer equation (RTE) and the spectral invariants theory. The former simplifies the characteristics of canopy structures with a pair-correlation function so that the 3D information can be succinctly packed into a 1D equation. The latter indicates that the interactions between photons and canopy elements converge to certain invariant patterns quantifiable by a few wavelength independent parameters, which satisfy the law of energy conservation. By revealing the connections between plant structural characteristics and photon recollision probability, these developments significantly advance our understanding of the transportation of radiation within vegetation canopies. They enable a novel physically-based algorithm to simulate the “hot-spot” phenomenon of canopy bidirectional reflectance while conserving energy, a challenge known to the classic radiative transfer models. Therefore, these theoretical developments have a far-reaching influence in optical remote sensing of the biosphere.

vegetation remote sensing; stochastic radiative tr↗

GeoNEX: A geostationary earth observatory at NASA Earth eXchange: Earth monitoring from operational geostationary satellite systems

The latest generation of geostationary satellites (Himawari 8/9, GOES-16/17, FY-4, GK-2A) carries sensors that closely mimic the spatial and spectral characteristics of widely used polar-orbiting, global monitoring sensors such as MODIS and VIIRS. When combined, data from various currently operating/planned geostationary platforms provide a geo-ring of hyper-temporal (5-10 minutes), multispectral observations at spatial resolutions as high as 500 m. These high frequency observations offer exciting new possibilities for monitoring our planet, including better retrievals of geophysical variables by overcoming cloud cover, enabling studies of diurnally varying phenomena in the atmosphere, land, and the oceans, and support operational decision-making in agriculture, hydrology and disaster management. The NASA Earth Exchange (NEX) team, in collaboration with scientists from JAXA, KARI, NOAA and other international institutions, created the GeoNEX (www.nasa.gov/geonex) pipeline to integrate data from all available geostationary platforms and produce and distribute spatially, temporally, and radiometrically consistent data for the earth science community. We envision various institutions adapting the Geo component (e.g., GeoNOAA, GeoKARI, GeoChiba, GeoJAXA, GeoCMA) and customizing the pipeline and downstream products to serve the local/regional research and applied science communities.

Ramakrishna R Nemani↗

AN INTRODUCTION TO THE GEONEX LEVEL-1G PRODUCTS: TOP-OF-ATMOSPHERE REFLECTANCE AND BRIGHTNESS TEMPERATURE

This paper introduces the GeoNEX (Geostationary-NASA Earth eXchange) Level-1G products of top-of-atmosphere (TOA) reflectance and brightness temperature. The products use data streams from the latest geostationary (GEO) sensors including the GOES-16/17 ABI and the Himawari-8/9 AHI. The GeoNEX processing pipeline starts by converting digital numbers to physical quantities with the latest radiometric calibration information. It integrates algorithms to automatically detect and remove residual geolocation errors, to estimate the pixel-wise data-acquisition time, and to accurately calculate the solar illumination angles for each pixel in the domain at every time step. The outputs are reprojected to a globally tiled common grid in geographic coordinates designed to facilitate inter-comparisons and/or synergies between the GeoNEX products and existing Earth observation datasets from polar-orbiting satellites. Therefore, the GeoNEX L1G products provide accurate and consistent TOA reflectance and brightness temperature datasets for scientific analyses and downstream product development.

Geostationary satellite, GOES-16, Himawari-8, NASA↗

Hourly GPP Estimation In Australia Using Himawari-8 AHI Products

We extended the MODIS 17 algorithm to hourly Gross Primary Product (GPP) estimation for Australia in 2018. AHI 1-km data are available at NASA Earth Exchange (NEX) facility. The high-frequent observation of Advanced Himawari Imager (AHI) enabled us to calculate hourly GPP, which is corresponding to ground observation of carbon flux measured by TERN OzFlux. We interpolated the weather observation data to 1-km grid over Australia ingesting AHI reflectance and radiometric temperature data (NEX-Gridded Hourly Meteorology (NEX-GHM)). Then, we applied MODIS 17 algorithm to each grid with optimized climate regulation functions. The estimation of climate and GPP were well correlated with OzFlux ground observation data.

Himawari-8↗

Uncertainty Analysis of the GeoNEX Top-of-Atmospheric Reflectance Products Generated from the Third-Generation Geostationary Satellite Sensors

The GeoNEX (Geostationary-NASA Earth eXchange) Level-1G products consist of top-of-atmosphere (TOA) bi-directional reflectance factor (BRF) and brightness temperature generated with data streams from the latest geostationary (GEO) sensors including GOES-16/17 ABI, Himawari-8/9 AHI, and GK-2A AMI on a global tiled common grid (60oN-60o and 180oW-180oE) in geographic coordinates. With their 16 spectral bands, 0.01o/0.02o nadir spatial resolution, and 10-minute temporal resolutions, these products provide exciting opportunity to monitor Earth surface processes. However, the unique Sun-Target-Satellite geometry of geostationary sensors demands special attention in analyzing/interpreting these datasets. In this study we present a systematic analysis on the relationship between the radiometric uncertainties of the GeoNEX TOA reflectance and the corresponding solar/satellite zenith angles. We show that the signal-to-noise ratio (SNR) of the BRF are positively proportional to the square roots of the cosine of solar illuminating zenith angles. That is, the BRF data are noisier earlier in the morning or later in the afternoon than in the mid of the day. The cosine of satellite viewing zenith angles do not directly influence the SNR of the TOA BRF. However, they positively regulate the relative importance of the surface component in the TOA BRF. This means that variations in surface reflectance are more difficult to detect for pixels with larger view zenith angles, even when the SNR of the TOA BRF is the same. We are developing metrics to specify such illumination-view geometry related uncertainties in the GeoNEX L1G TOA BRF products so that this key information can be easily accessed by the user community.

Geostationary satellite↗

Generation of Land Surface Reflectance with Combined Geo-KOMPSAT-2A AMI and Himawari 8 AHI Observations

The latest generation of geostationary satellites has opened a new era of Earth observations with unprecedented spatiotemporal resolution and spectral range. Together with GOES 16/17 ABI, FY4-A AGRI, and Himawari-8 AHI, a new Korean geostationary satellite (Geo-KOMPSAT-2A AMI) has operationally collected a full-disk image in 16 channels every ten minutes since July 2019, allowing diurnal land surface monitoring over a large proportion of Asia and all of Oceania. Retrieving accurate surface reflectance (SR) over land from GK-2A/AMI is a challenging but high priority objective. One of the challenges is the absence of a spectral band in the 2.2 m SWIR range from AMI, which is required by many atmospheric correction algorithms to retrieve atmospheric aerosol properties. To remedy this issue, we adopt a strategy that combines concurrent GK-2A/AMI and Himawari 8/AHI observations in order to derive AMI SR. We have adapted the NASA Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to process the data stream from Himawari 8/AHI. The advantages of the MAIAC algorithm is its capability to exploit the high temporal frequency and varying illumination geometry of the geostationary data for advanced cloud/snow detection, aerosol retrieval, and characterization of surface bidirectional reflectance properties. Leveraging the similarities of spectral bands and the sun-target-sensor geometry between AMI and AHI, we are able to create denser time series of observations and enhanced BRDF samples over most of the spatial coverage of AMI (and AHI). The combined stereo-type observations not only help derive SR for AMI but also enhance retrievals of the corresponding AHI surface products. We evaluate the resulting AMI SR using ground (AERONET) observations and corresponding MODIS products. Further, we discuss potential challenges in utilizing the geostationary satellite data for land surface monitoring.

geostationary satellite↗

Detecting Short Term Drought Impact in the Southwest US Using GOES-16 ABI Data

Satellite optical remote sensing has been often used for monitoring broad-region vegetation change, for example, phenology observations and the year-to-year leaf area index (LAI) responses to climate oscillations. However, rapid responses of vegetation to day-to-day weather perturbations are difficult to detect using available optical remote sensing satellites because of the low frequency of the observations. Sun-synchronous optical sensors, such as Moderate Resolution Imaging Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR), can observe a target area once a day. Daily observations cannot distinguish whether short-term changes in Normalized Differential Vegetation Index (NDVI) are actual LAI change or cloud contamination. NOAA’s GOES satellites make observations every 10 to 15 minutes using the Advanced Baseline Imager (ABI). In this study, we used the Geostationary-NASA Earth Exchange (GeoNEX) L1G Top-of-Atmosphere (TOA) ABI data to detect drought impact on NDVI time series in the Southwest US. We used an empirical method to cancel the BRDF effect of varying solar zenith angle. The ABI was able to detect short term drought impacts as well as an NDVI decrease in the dry season. Increased NDVI right after a rainfall followed by an immediate decrease was observed. These ABI NDVI changes were correlated with the RGB time series from PhenoCam Network data. Results indicated that the ABI can be used for short-term analysis of LAI and can detect small LAI changes caused by drought in an arid area, suggesting the potential for its use in near-real time drought monitoring applications.

ABI↗

Geostationary Satellite Observations Over Global Environmental Monitoring Sites

Globally, there are now hundreds of ground-based environmental monitoring stations routinely collecting data on a variety of earth-atmosphere interactions. Such observations are also being augmented with data from orbiting satellites. With the beginning of the EOS-era, the MODIS subset around flux towers has been frequently used for validating ecosystem models developed at flux towers and upscaling the observed flux data to regional scales. However, MODIS on the polar-orbiting satellites can observe target regions only once a day, while the Fluxnet eddy- covariance data are compiled as sub-hourly. Therefore, summarizing the sub-hourly flux data into daily statistics is necessary for the comparison between MODIS and Flux data. The new generation geostationary satellite sensors (GOES-16/17 ABI and Himawari-8/9 AHI) have capabilities similar to MODIS but collect data at 5-15 minute intervals. These high-frequency observations allow us to understand and scale diurnal fluxes. Some studies have already shown the effective utilization of time series of geostationary satellite data for ecosystem modeling. We are producing NEX Level-1G products, which are gridded Top-of-Atmosphere reflectance and brightness temperature data from geostationary satellite sensors. We cut out the NEX Level-1G data using the same file format with the MODIS subset except for the projection. The other data products (e.g., surface reflectance, land surface temperature, vegetation indices, and climate data) will be added upon their availability. Currently included networks are Fluxnet, PhenoCam, and AERONET. The NEX subset data will be provided through NASA NEX data portal.

Geostationary Satellites↗

Using the Diurnal Variability in GeoNEX TOA Reflectances for Earth Monitoring

Observations from the third-generation geostationary satellite instruments (GOES 16/17 ABI, Himawari 8/9 AHI, and etc.) have spatial resolution and spectral band configurations comparable to flagship LEO sensors (e.g., MODIS/VIIRS). More importantly, these data are acquired at very high temporal resolution, faithfully recording the variations of the full disk of Earth at every 5-10 minutes. They thus provide unique information about Earth’s atmosphere and surface. In order to explore the unique information content of geostationary data, this study systematically analyzes the diurnal variability in the GeoNEX L1G TOA reflectance products and compares them to simulated results by state-of-the-art radiative transfer codes. Our results show that • The smoothness of the TOA reflectance diurnal cycle provides a convenient and reliable way to identify stable atmospheric conditions and filter out passing clouds/shadows. • The diurnal variability of the blue band (0.47µm) reflectance is regulated mainly by atmospheric optical conditions over a majority of land cover types. As such, the diurnal variability of the blue band data allows us to retrieve AOD without invoking the use of spectral band ratios (SRC) as in previous algorithms. • In comparison, the diurnal variability of the short-wave infrared band (2.2µm) BRFs is mainly regulated by surface reflectance and the sun-target-satellite geometry. This information allows us to test and, if suitable, retrieve surface BRDF parameters. • Spectral band ratios, especially those between the 2.2µm and 0.47µm bands, are not constant but vary by locations and sun-target-satellite geometries. Our analysis clearly demonstrates that the information provided in high-frequent geostationary observations is unique and complementary to LEO sensors. Therefore, a synergy of GEO and LEO (and other) sensors has the great potential to improve existing remote sensing models and algorithms for better Earth monitoring.

Diurnal Variability↗

2021 NASA Ames Earth Science Division Seminar Series

The Earth Science Division at NASA Ames Research Center in Silicon Valley, CA, conducts research in various topics including theoretical and experimental research into radiative transfer, remote sensing, aerosols, clouds, and climate change, as well as ways in which this research can be applied for decision making. You can find out more about the division at: https://www.nasa.gov/centers/ames/earthscience. The seminar series invites nationally and internationally recognized researchers to present their research. Seminars are held biweekly on Thursdays and are open to everyone int he Ames Science Directorate

Tushar Prabhakar↗

Development of the GeoNEX Level 2G Products: Exploiting the Diurnal Variability of TOA Reflectance in Atmospheric Correction

This study develops a new atmospheric correction algorithm to generate the Level 2G products, in particular the gap-filled Surface Reflectance at 10-minute time steps, for the Geostationary-NASA Earth Exchange (GeoNEX) project. The algorithm is based on the MODIS MAIAC (Multi-Angle Implementation of Atmospheric Correction) framework but with significant modifications to exploit angular/temporal information from the diurnal variability of the GeoNEX L1G TOA (Top-of-Atmosphere) reflectance. The algorithm starts by evaluating the roughness/smoothness of the diurnal time series of the TOA reflectance. Because rapid changes in TOA reflectance are generally caused by passing clouds or shadows, rough segments of the time series are automatically filtered out while the smooth segments are further tested for brightness and temperature to identify clear-sky and snow-free observations. Next the algorithm runs the MAIAC RTM (Radiative Transfer Model) to retrieve the Ross-Thick-Li-Sparse (RTLS) BRDF model parameters and the daily-mean atmospheric optical depth (AOD) that allow the RTM to optimally simulate the observed diurnal variability of clear-sky TOA reflectance. Once the initial RTLS parameters are retrieved after the algorithm’s burn-in period, they are used as the prior information to predict the AOD level for the next days, while the subsequent clear-sky observations are used to make necessary adjustments to the RTLS parameters in an continuous fashion. This “prediction-analysis” cycle is then iterated to process the full time series of the L1G data, skipping only total-cloudy days or when surface snow is detected. We tested the algorithm over a list of selected AERONET sites. The retrieved results (the daily mean AOD and the RTLS parameters) reasonably agree with the ground-based measurements. Importantly, the results indicate that the diurnal cycles of surface reflectance are continuous functions of the illumination-view geometry. Thus we can use the retrieved RTLS model to accurately fill in data gaps on partial cloudy days. Also, our algorithm is totally independent from the traditional approaches based on the use of spectral band ratios between the shortwave infrared (e.g., 2.2µm) and the visible (e.g., 0.47µm and 0.64µm) bands. Our results thus demonstrate that the high-frequent diurnal geostationary observations contain unique information that helps us improve atmospheric correction of remote sensing data.

GeoNEX↗

Improving Geolocation Accuracy of the Advanced Meteorological Imager on the GEO-KOMPSAT-2A

GeoNEX is a collaborative project led by scientists from NASA and many other international institutes to generate Earth monitoring products using data streams from the latest geostationary (GEO) sensors. Its consistent processing and common gridding systems can produce research-quality data products from GEO sensors and leverage GEO-GEO or GEO-LEO (low earth orbit) synergistic uses. Currently, GeoNEX has produced and disseminated L1G (geometrically corrected Level 1 products) from GOES 16/17 ABIs and Himawari-8 AHI, but a new Korean geostationary sensor (Advanced Meteorological Imager, AMI) onboard Geo-KOMPSAT-2A covering a large proportion of Asia and all of Oceania is in development. Our recent efforts on assessing geolocation accuracy in ABI and AHI suggest a nontrivial residual exists in both level 1B data with varying spatiotemporal patterns. The findings urge us to prioritize identifying and correcting geolocation residuals of AMI to generate accurate and consistent GeoNEX top-of-atmosphere (TOA) reflectance products and following processing chains. Here we implement a phase correlation correction approach to a visible band (0.64 μm, 500 m) using landmarks prepared from finer scale digital terrain models. We characterize spatiotemporal patterns (e.g., diurnal & daily) of geolocation residuals of AMI before and after correction. We then assess stability of datasets and quantify impact of unexpected geolocation errors on terrestrial monitoring. The geolocation corrected AMI data are further compared with GeoNEX AHI L1G products which are able to create unique stereo-type observations with AMI through leveraging the similarities of spectral bands and the sun-target-sensor geometry. Further, we discuss challenges in utilizing the GEO-GEO (e.g., AMI & AHI) satellite data for potential applications.

Geostationary Satellites↗

GeoNEX-SUBSETS: Geostationary Satellite Observations Over International Observing Network Sites

Satellite remote sensing is crucial for monitoring the Earth’s surface and for simulating global carbon and water cycles. Subsets of satellite data from sensors such as MODIS over established observing networks have been valuable for researchers for comparing the ground observed phenomena with satellite observations. Here, we introduce new subsets of the GeoNEX geostationary satellite datasets over locations of several ground observation networks. The NASA Earth Exchange group has been generating geostationary satellite products with our international partners and universities to cover the entire globe. In comparison to polar-orbiting satellite sensors such as MODIS, the new generation geostationary satellites observe target areas at a higher frequency (5-10 minutes), which also significantly increased the data volume. To reduce the burden of downloading and extracting geostationary time series data and provide easy access to the community, we provide subsets of GeoNEX products through our data portal [www.data.nas.nasa.gov]. The ready-to-use subset follows the same format as the MODIS fixed sites subset tools for users who are familiar with MODIS subset data and software. The selected networks include Fluxnet, AERONET, and Phenocam over the conterminous US. We demonstrate the usage of the GeoNEX fixed-site subset data and showcase thir advantages with three example studies. The first example is simulating the diurnal cycle of plant ecophysiology at Fluxnet sites. The high frequency of the GeoNEX time series allows us to run ecological models at sub-hour time steps and directly compare the simulated carbon and water fluxes with half-hourly Fluxnet data. The second example uses the geostationary data to track phenological changes. It highlights the high-frequent observations of geostationary satellites in helping mask cloud covers and capture the quick responses of vegetation to environmental changes. As such, these examples demonstrate the value of ready-to-use GeoNEX subsets data in terrestrial ecophysiology research.

GeoNEX↗

GeoNEX-SUBSETS: Cutouts of geostationary satellite data over long-term monitoring sites

Satellite remote sensing data are important tool for extrapolating the knowledge obtained at the Fluxnet towers. We introduce our GEO-NEX geostationary satellite subset products, which make it easy to compare between ground observation and Geo-NEX products. The MODIS subset has been frequently used for validating ecosystem models developed at flux towers and upscaling the observed flux data to regional scales. However, MODIS on the polar orbiting satellites can observe target regions only once a day, while the Fluxnet eddy-covariance data are compiled as sub-hourly datasets. As a results, summarizing the sub-hourly flux data into daily statistics is necessary for the comparison between MODIS and Flux data. Here, the new generation geostationary satellite sensors (GOES-16/17 ABI and Himawari-8/9 AHI) has the high-frequent observation feature (10 minutes) in addition to similar spectral band and spatial resolution with MODIS. The high frequent observation allows us to compare the flux diurnal cycle with geostationary satellite sensor data. Some studies have already shown the effective utilization of time series of geostationary satellite data for ecosystem modeling. We are producing NEX Level-1G products, which is the gridded Top-of-Atmosphere reflectance and brightness temperature data of geostationary satellite sensors. We cut out the NEX Level-1G data using the same file format with the MODIS subset except for the projection. The other data products (e.g., surface reflectance, land surface temperature, vegetation indices and climate data) will be also added upon their availability. We selected the ground observation sites from Fluxnet, Phenocam, and AERONET networks. The NEX subset data will be provided through NASA NEX data portal.

GeoNEX↗