Search NASA⌕ Search

Engineering topics

Hirofumi Hashimoto

Publications and source records attributed to Hirofumi Hashimoto.

26 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Development of a Global Reference Surface Reflectance and BRDF Datasets from Geostationary Satellite Observations and AERONET Measurements

Surface reflectances and their dependency on illumination-view geometries (i.e., BRDF) are the foundation of many high-level satellite products for land and water monitoring. Yet it is difficult to evaluate the quality of satellite-based surface reflectances with ground-based measurements due to the spatial scale differences. In order to fill the gap, here we develop a reference dataset of surface reflectance and BRDF at the global AERONET sites with data streams from operational geostationary sensors including Himawari 8/9 AHI, GK-2A AMI, and GOES 16/17 ABI. Taking the top-of-atmosphere (TOA) reflectance and the site measured atmospheric aerosol optical depth (AOD) as the main inputs, we apply the GeoNEX-AC algorithm to performance accurate atmospheric correction and derive 10-minute surface reflectance and daily Ross-Thick-Li-Sparse (RTLS) BRDF parameters at AERONET sites where coincident AOD measurements and TOA observations are available from 2016 (for Himawari) or 2018 (for GOES) onwards. The algorithm ensures that the retrieved surface BRDF parameters, along with the site-measured AOD, allow the atmospheric radiative transfer model, SHARM, accurately simulate the observed TOA reflectance at diurnal and longer time scales. They are our best estimates of the surface optical properties and thus can serve as the “reference” to evaluate the performance of operational atmospheric correction algorithms (where AOD is assumed unknown and needs to be retrieved). The reference BRDF also allow us to evaluate the spectral band ratios between the SWIR (e.g., 2200 nm) and the visible (e.g., 650 nm) regions, which are commonly used in operational atmospheric correction algorithms. Finally, we demonstrate that the reference dataset can be used to develop potential data synergies between different GEO satellites as well as GEO-LEO sensors.

Weile Wang↗
NASA NTRSDate not supplied

Hourly Carbon Fluxes Estimation Using the GOES Advanced Baseline Imager (ABI) Data Over the Conterminous USA

Tremendous efforts by Fluxnet scientists over the past few decades have made thousands of site-years of carbon flux observations available for advancing our understanding of carbon cycling in terrestrial ecosystems. One of key Fluxnet measurements is net ecosystem exchange (NEE) as it is directly related to carbon budget of terrestrial ecosystems. However, carbon flux estimation studies using satellite remote sensing have focused mainly on daily Gross Primary Production (GPP). The satellite based carbon flux estimation used the polar orbiting satellite sensors (e.g., Moderate Resolution Imaging Spectroradiometer (MODIS)), which allow us to observe target regions only once during the day. Because daily NEE is close to zero value, the carbon flux models using the polar orbiting satellite data have not been well used for NEE estimation. The new generation of geostationary satellite sensors (e.g., GOES Advanced Baesline Imager (ABI) and Himawari Advanced Himawari Imager (AHI)) provide frequent observations, often less than every 10 minutes. Here, we use GOES ABI data to estimate hourly NEE over the conterminous USA. We used the Terrestrial Observation Prediction System (TOPS) model for estimating hourly NEE. TOPS is a diagnostic ecosystem process model that simulates the fluxes of carbon and water through vegetation in response to climate variability. For the climate input, we developed hourly climate data using the same algorithm with NASA Earth Exchange Gridded Daily Meteorology (NEX-GDM) datasets based on machine learning techniques. The hourly climate data includes precipitation, maximum temperature, minimum temperature, dew point temperature, and, in particular, solar radiation that is directly derived from the Geostationary observations. The spatial patterns of ecosystem parameters used in TOPS are optimized using satellite Solar Induced Fluorescence (SIF) data. The high frequency GPP estimations from geostationary satellite sensors make it comparable to the instantaneous SIF data than daily GPP. We also used Fluxnet data for optimization of model parameters and the validation of the output. The derived data addresses the diurnal dynamics of carbon cycling at large scales and should help in reducing the uncertainties in carbon budget studies.

Geostationary satellite↗
NASA NTRSDate not supplied

Fusing GeoNEX and VIIRS Surface BRDF Retrievals: Exploring a GEO-LEO Synergy

The Bidirectional Reflectance Distribution Function or BRDF, which describes the dependency of surface reflectance on the illumination-view geometries, are the foundation of many high-level satellite products for terrestrial and aquatic system monitoring. The latest geostationary sensors like GOES ABI provide high frequent (~10 minutes) observations of the Earth surface that feature continuously changing sun angles, allowing us to retrieve surface BRDF with dedicated atmospheric correction algorithms like MAIAC (Multi-Angle Implementation of Atmospheric Correction). For mid-latitude locations, because geostationary satellites have fixed view angles in the back-scattering directions, the angular sampling of surface BRDF by GEO sensors is not comprehensive. This study explores a GEO-LEO synergy to address this issue. We first extract concurrent GeoNEX and VIIRS BRDF data with the best quality (cloud-free and low aerosol loading) at chosen AERONET sites. We then compare the magnitude and the shape factors of the two set of BRDF parameters as well as their variations through the season. We calculate the “distances” between the GeoNEX and VIIRS BRDF by using them to cross-predict the top-of-atmosphere reflectance measured by their counterpart and evaluating the corresponding prediction errors. This metric allows us to derive a set of optimized BRDF parameters that minimize such distances or prediction errors, which are considered as the fused BRDF result. We validate the algorithm with reserved AERONET data and then apply it to generate the GEO-LEO BRDF synergy over CONUS. We expect the fused BRDF to have reduced uncertainties as compared to the source GeoNEX or VIIRS data and may find broadly application in deriving other high-level satellite products.

Geostationary satellite↗
NASA NTRSDate not supplied

Development of Carbon Flux Model Using ABI Data Over the Conterminous US

The satellite-driven carbon flux estimation has been playing important role to estimate continental-scale carbon budget. One of the biggest recent advances in the satellite-driven carbon flux modeling is utilization of high-frequent geostationary satellites to estimate diurnal cycle in carbon fluxes. The satellite based carbon flux estimation used the polar orbiting satellite sensors (e.g., Moderate Resolution Imaging Spectroradiometer (MODIS)), which allow us to observe target regions only once during the day. The new generation of geostationary satellite sensors provide frequent observations, often less than every 10 minutes. Here, we use GOES Advanced Baseline Imager (ABI) data to estimate hourly NEE over the conterminous US. We used the Terrestrial Observation Prediction System (TOPS) model for estimating hourly NEE. TOPS is a diagnostic ecosystem process model that simulates the fluxes of carbon and water through vegetation in response to climate variability. For the climate input, we developed hourly climate data using the same algorithm with NASA Earth Exchange Gridded Daily Meteorology (NEX-GDM) datasets based on machine learning techniques. The hourly climate data includes precipitation, maximum temperature, minimum temperature, dew point temperature, and solar radiation were derived from the Geostationary observations. The spatial patterns of ecosystem parameters used in TOPS are optimized using satellite Solar Induced Fluorescence (SIF) data. The high frequency GPP estimations from geostationary satellite sensors make it comparable to the instantaneous SIF data than daily GPP. We also used Ameriflux data for optimization of model parameters and the validation of the output. The derived data addresses the diurnal dynamics of carbon cycling at large scales and should help in reducing the uncertainties in carbon budget studies.

geostationary satellite↗
NASA NTRSDate not supplied

Joint Retrieval of Surface BRDF from Geostationary and Polar-Orbiting Satellite Sensors

The latest geostationary sensors like GOES 16/17 ABI and Himawari 8/9 AHI provide high frequent observations of the Earth surface with continuously changing solar illumination geometries, which allow us to retrieve the surface Bidirectional Reflectance Distribution Function (BRDF) with dedicated atmospheric correction algorithms like MAIAC (Multi-Angle Implementation of Atmospheric Correction). However, because the viewing geometry of a specific location from the geostationary satellites are fixed, the angular sampling of surface BRDF by GEO (Geostationary Earth Orbit) sensors is far from comprehensive. This study tries to address this issue by exploring a GEO-LEO (Low-Earth-Orbit) synergy, in particular, jointly retrieving surface BRDF parameters with concurrent ABI/AHI and VIIRS top-of-atmosphere (TOA) reflectance for the near-infrared (NIR) band. The NIR band is chosen because the ABI, AHI, and VIIRS instruments have very similar spectral response functions in this band and therefore simplifies the requirements for cross-sensor radiometric calibration. We compile ABI/AHI and VIIRS TOA data with the best quality (cloud-free and low aerosol loading) at chosen AERONET sites. We then run the GeoNEX MAIAC algorithm to retrieve the Ross-Thick-Li-Sparse (RTLS) surface BRDF parameters with or without the AEORNET measured atmospheric aerosol optical depth (AOD) as inputs. The joint retrieval results are considered the best estimate of surface BRDF. We compare the joint BRDF retrievals with the corresponding MAIAC BRDF products, retrieved with ABI/AHI or VIIRS separately, to evaluate their differences. We expect that the jointly retrieved BRDF data are more robust than the standard products and may help us reduce uncertainties in higher-level earth observation satellite products.

Remote Sensing↗
NASA NTRSDate not supplied

Mapping Surface Vapor Pressure Deficits From Geostationary Satellites for Fire Weather Monitoring

The increase in the wildfires were observed globally in accordance with global warming, and to real- time monitoring of wildfire risk in broad scale is demanded for wildfire management to prevent the spread of wildfires. Scientists invented a lot of indices to assess the wildfire risk. Vapor Pressure Deficit (VPD) is one of the most important meteorological components for those indices. Compared to other components of fire weather indices, VPD can change quickly from lower risk to higher risk even in sub-hourly. Therefore, real-time fire risk monitoring requires high-resolution and high- temporal VPD spatial map. Here, we developed VPD estimation method using the GOES Advanced Baseline Imager (ABI) data. Unlike the polar-orbital satellite data, the ABI can observe target region every 10 minutes, so that we can estimate VPD for fire weather in real-time. The method used to estimate VPD is same with the algorithm of NASA Earth Exchange Gridded Daily Meteorology (NEX- GDM), which estimate meteorological variables from ground weather observation and spatial variables based on random forest (RF). We calculated RF importance to select bands of ABI as input of the model. To validate our results, we compared the spatial pattern of our VPD data with the Real- Time Mesoscale Analysis (RTMA) data over the conterminous USA. We sought possibility of applying our method to the region where no real-time high-resolution weather data is available, such as South America. The developed method can produce real-time high-resolution high-frequent VPD data in the continental scale. The derived data from GOES ABI could contribute to improve the fire weather monitoring and lead to prevent wildfires.

Hirofumi Hashimoto↗
NASA NTRSDate not supplied

Fusing Surface BRDF from Geostationary and Polar-Orbiting Satellite Sensors

The bi-directional reflectance distribution function (BRDF) describes the fundamental optical property of a surface and therefore has been retrieved from both geostationary (GEO) and polar-orbiting (or Low-Earth Orbit, LEO) satellite observations. In theory, although GEO and LEO observations feature different illumination-view geometries, they reflect the same physical property and the retrieved BRDF should be mutually consistent. This fact also suggests that we may derive a better BRDF product by synergistically fusing the GEO and LEO datasets. Here we demonstrate the idea by fusing Terra/Aqua MODIS and GOES16/17 ABI surface BRDF with the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm. Our processing is implemented in two steps. First, we compile and project both MODIS and ABI data on the same GeoNEX common grid, and then use the MODIS MAIAC BRDF (MCD19A3) as the prior information to perform atmospheric correction of ABI data and retrieve surface BRDF with the ABI MAIAC code. In the second step, we run the MAIAC code in the forward mode to simulate MODIS and ABI TOA radiances from the jointly retrieved surface BRDF and the corresponding illumination-view geometries. By comparing the simulated TOA radiances with corresponding observations (e.g., MOD02 and ABI05), we can quantitatively evaluate whether the jointly retrieved ABI surface BRDF improves over the separately retrieved MODIS and ABI BRDF products. We expect that the jointly retrieved BRDF data are more robust than the standard products and can help us reduce uncertainties in higher-level earth observation satellite products.

Geostationary satellite↗