Search NASA⌕ Search

Engineering topics

Holman, Zachary C.

Publications and source records attributed to Holman, Zachary C..

23 records · Page 2

Photonic Crystal Waveguides for >90% Light Trapping Efficiency in Luminescent Solar Concentrators

Luminescent solar concentrators are currently limited in their potential concentration factor and solar conversion efficiency by the inherent escape cone losses present in conventional planar dielectric waveguides. Here, we demonstrate that photonic crystal slab waveguides tailored for luminescent solar concentrator applications can exhibit >90% light trapping efficiency. This is achieved by use of quantum dot luminophores embedded within the waveguide that absorb light at photon energies corresponding to photonic crystal leaky modes that couple to incoming sunlight. The luminophores then emit at lower photon energies into photonic crystal bound modes that enable highly efficient light trapping in slab waveguides of wavelength-scale thickness. Photonic crystal waveguides thus nearly eliminate escape cone losses, and overcome the performance limitations of previously proposed wavelength-selective dielectric multilayer filters. We describe designs for hole-array and rod-array photonic crystals comprised of hydrogenated amorphous silicon carbide using CdSe/CdS quantum dots. Our analysis suggests that photonic crystal waveguide luminescent solar concentrators using these materials these can achieve light trapping efficiency above 92% and a concentration factor as high as 100.

36 MATERIALS SCIENCE↗

Surface Photovoltage Measurement of Perovskite Solar Cells to Screen Carrier Selective Contacts

SPV measurement through the Kelvin probe method is described. Silicon heterojunction structures show the maximum SPV of 700 V. Measurement on perovskite structures, and the results suggest adding BCP with C60 enhances the selectivity of C60 electron contact. Furthermore, PTAA and PTAA/PFN have similar selectivity but NiO x is poorly selective. SPV is an easy way to provide a relative comparison between various cell structures and contact layers to determine the relative extractable Voc and properties of the contact layer (selectivity, passivation) limiting the efficiency.

Kavadiya, Shalinee↗

Inserting a Low-Refractive-Index Dielectric Rear Reflector into PERC Cells: Challenges and Opportunities

One of the simplest and most effective ways to reduce the operating temperature of photovoltaic systems in the field is to reflect unusable, 'sub-bandgap' light with energies below the cell absorber's bandgap energy. In this work, low-refractive index SiO2 nanoparticle films inserted between c-Si wafers and metal electrodes significantly increase the reflectance of sub-bandgap light in fabricated test structures. These films are then integrated into the standard PERC fabrication sequence, revealing that the reflection benefits remains after some processing steps but are lost in certain conditions. The SiO2 nanoparticle films are easily ablated during laser contact opening, but are undesirably etched during post-laser cleaning. After Al metallization, the fully fabricated devices show enhanced sub-bandgap reflection when annealed at moderate temperatures, but energy-dispersive X-ray spectroscopy shows that high-temperature firing causes unwanted Al penetration into the SiO2 nanoparticle film, compromising reflection.

14 SOLAR ENERGY↗