Search NASA⌕ Search

Engineering topics

Hooker, M W

Publications and source records attributed to Hooker, M W.

Electrical and Mechanical Characterizations of Nanocomposite Insulation for HTS Systems

As HTS wire technology continues to advance, a critical need has emerged for dielectric materials that can be used in superconducting components such as terminations, fault current limiters, transformers, and motors. To address this need, CTD is developing nanocomposite insulations based on epoxy and benzoxazine chemistries. Depending on part geometry, some processing methods are more efficient than others. For this reason, CTD is investigating both fiber-reinforced and filled resin systems for use in these applications. A thorough set of electrical testing including AC breakdown, breakdown as a function of thickness, and flashover shows promising performance characteristics. In addition, mechanical testing (short beam shear and compression) indicate that these new materials to have as good or better performance than G10.

Walsh, J K↗

Nanocomposite Insulation for HTS Applications

High temperature superconducting (HTS) cable technology is rapidly developing for use in the areas of power generation and distribution. While significant progress has been made thus far in developing this technology, further effort is needed to improve the efficiency and cost of dielectric materials for use in these systems. These materials must be compatible with cryogenic operation, exhibit excellent dielectric properties at cryogenic temperatures, and provide a high level of reliability when in service. Moreover, the dielectric materials must be able to be produced into complex forms using cost-effective, industrially scalable processes. To improve upon current fiber-reinforced-polymer composite dielectric materials, the present study investigates the advantages of including nanomaterial reinforcement within the polymer resins. It was found that the nanomaterial additions did not greatly impact the polymer viscosity or increase the cure rate, which enables the nanomaterial-enhanced polymer to be used in fabricating fiber-reinforced composite dielectric materials. The nanomaterial-enhanced composite dielectric materials demonstrated greater than 60% higher AC dielectric breakdown strengths and improved consistency of performance compared to the current standard, G10. Similarly, shear and compression strengths of nanomaterial-enhanced composite dielectric materials compared well with those of G10.

36 MATERIALS SCIENCE↗

NEW INSULATION APPLICATION PROCESS FOR WIND-AND-REACT MAGNET FABRICATION

Wind-and-react processes offer a cost-effective means of fabricating large-scale Nb{sub 3}Sn magnets, while also eliminating the need to manipulate the brittle superconductor after the high-temperature reaction process. Composite Technology Development, Inc. (CTD) has developed a hybrid inorganic/organic insulation system that can be co-processed with the Nb{sub 3}Sn magnet at elevated temperatures. In this work, a new process was demonstrated for applying a thin, ceramic-based insulation that is compatible with wind-and-react processing. The insulation was applied to Rutherford cables using a continuous manufacturing process, and cable assemblies (i.e., 10-stacks) were fabricated and tested. The results of this work show that the insulation possesses a high strain tolerance, as well as the dielectric strength and fatigue resistance needed for high-field magnet applications.

36 MATERIALS SCIENCE↗