Search NASA⌕ Search

DOE OSTI · 21136737

NEW INSULATION APPLICATION PROCESS FOR WIND-AND-REACT MAGNET FABRICATION

Abstract

Wind-and-react processes offer a cost-effective means of fabricating large-scale Nb{sub 3}Sn magnets, while also eliminating the need to manipulate the brittle superconductor after the high-temperature reaction process. Composite Technology Development, Inc. (CTD) has developed a hybrid inorganic/organic insulation system that can be co-processed with the Nb{sub 3}Sn magnet at elevated temperatures. In this work, a new process was demonstrated for applying a thin, ceramic-based insulation that is compatible with wind-and-react processing. The insulation was applied to Rutherford cables using a continuous manufacturing process, and cable assemblies (i.e., 10-stacks) were fabricated and tested. The results of this work show that the insulation possesses a high strain tolerance, as well as the dielectric strength and fatigue resistance needed for high-field magnet applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kano, K S, Stewart, M W, Hooker, M W. 2008-03-03. NEW INSULATION APPLICATION PROCESS FOR WIND-AND-REACT MAGNET FABRICATION. https://doi.org/10.1063/1.2900347. https://searchnasa.com/record/osti%3A21136737/new-insulation-application-process-for-wind-and-react-magnet-fabrication

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗