Engineering topics

Hu, Enyuan

Publications and source records attributed to Hu, Enyuan.

At least 37 records · Page 2

DOE OSTI2023

Oxygen redox chemistry: A new approach to high energy density world

Sodium-ion batteries (SIBs) have been considered as promising candidates for large scale energy storage systems due to the great abundance of sodium resources. For sodium layered transition metal oxide cathode materials, oxygen redox can increase the energy density by enabling extra capacity and delivering high voltage. Here we provide a comprehensive overview of oxygen redox in SIBs from the perspectives of mechanism, challenges, and solutions. The previous studies on voltage hysteresis, capacity decay and oxygen release induced by oxygen redox as well as the effectiveness of different strategies including superlattice engineering, elemental substitution, and surface modification on the electrochemical performances of cathode materials with oxygen redox are comprehensively summarized with typical examples. Finally, the remaining challenges and the future research direction are discussed.

25 ENERGY STORAGE↗

DOE OSTI2023

Review on Low-Temperature Electrolytes for Lithium-Ion and Lithium Metal Batteries

Abstract Among various rechargeable batteries, the lithium-ion battery (LIB) stands out due to its high energy density, long cycling life, in addition to other outstanding properties. However, the capacity of LIB drops dramatically at low temperatures (LTs) below 0 °C, thus restricting its applications as a reliable power source for electric vehicles in cold climates and equipment used in the aerospace. The electrolyte engineering has proved to be one of the most effective approaches to mitigate LIB performance degradation at LTs. In this review, we summarize the important factors contributing to the deterioration in Li + transport and capacity utilization at LTs while systematically categorize the solvents, salts and additives reported in the literature. Strategies to improve the Li + transport kinetics, in the bulk electrolyte and across the interphases, are discussed. In particular, the formation mechanism of solid electrolyte interphase and its functionality for LT electrolytes are analyzed. Perspectives on the future evolution of this area are also provided. Graphical abstract

25 ENERGY STORAGE↗

DOE OSTI2023

Localized high-concentration electrolytes get more localized through micelle-like structures

Liquid electrolytes in batteries are typically treated as macroscopically homogeneous ionic transport media despite having a complex chemical composition and atomistic solvation structures, leaving a knowledge gap of the microstructural characteristics. Here, we reveal a unique micelle-like structure in a localized high-concentration electrolyte, in which the solvent acts as a surfactant between an insoluble salt in a diluent. The miscibility of the solvent with the diluent and simultaneous solubility of the salt results in a micelle-like structure with a smeared interface and an increased salt concentration at the centre of the salt–solvent clusters that extends the salt solubility. These intermingling miscibility effects have temperature dependencies, wherein a typical localized high-concentration electrolyte peaks in localized cluster salt concentration near room temperature and is used to form a stable solid–electrolyte interphase on a Li metal anode. Importantly, these findings serve as a guide to predicting a stable ternary phase diagram and connecting the electrolyte microstructure with electrolyte formulation and formation protocols of solid–electrolyte interphases for enhanced battery cyclability.

25 ENERGY STORAGE↗

DOE OSTI2023

High-Voltage Potassium Hexacyanoferrate Cathode via High-Entropy and Potassium Incorporation for Stable Sodium-Ion Batteries

Prussian blue analogues (PBAs) used as sodium ion battery (SIB) cathodes are usually the focus of attention due to their three-dimensional open frame and high theoretical capacity. Nonetheless, the disadvantages of a low working voltage and inferior structural stability of PBAs prevent their further applications. Herein, we propose constructing the K x (MnFeCoNiCu)[Fe(CN) 6 ] (HE-K-PBA) cathode by high-entropy and potassium incorporation strategy to simultaneously realize high working voltage and cycling stability. In this study, the reaction mechanism of metal cations in HE-K-PBA are revealed by synchrotron radiation X-ray absorption spectroscopy (XAS), ex situ X-ray photoelectron spectroscopy (XPS), and in situ Raman spectra. We also investigate the entropy stabilization mechanism via finite element simulation, demonstrating that HE-K-PBA with small von Mises stress and weak structure strain can significantly mitigate the structural distortion. Benefit from the stable structure and everlasting K + (de)intercalation, the HE-K-PBA delivers high output voltage (3.46 V), good reversible capacity (120.5 mAh g –1 at 0.01 A g –1 ), and capacity retention of 90.4% after 1700 cycles at 1.0 A g –1 . Moreover, the assembled full cell and all-solid-state batteries with a stable median voltage of 3.29 V over 3000 cycles further demonstrate the application prospects of the HE-K-PBA cathode.

25 ENERGY STORAGE↗

DOE OSTI2023

Promoting reversibility of layered potassium cathode through interstitial doping

With the increasing needs for large-scale and low-cost energy storage devices, Mn-based layered oxide cathodes have achieved considerable researching interests for potassium-ion batteries owing to their high energy density, abundant resource and low toxicity. However, their developments are challenged by the absence of suitable cathode materials to tolerate large-sized K-ion insertion/extraction and the presence of Jahn-Teller distortion of Mn 3+ . To address this issue, here we present a strategy of embedding boron into interstitial tetrahedral sites to obtain a P3-K 0.5 Mn 0.8 Co 0.2 B 0.1 O 2 cathode. Strong B-O covalent bonds facilitate the construction of robust orthorhombic framework and alleviate the undesired elongation of Mn-O bonds, contributing to excellent electrochemical performance. In addition, boron ions are verified to promote the formation of a homogeneous cathode electrolyte interphase layer, improving interfacial stability and realizing highly reversible cycling in a wide voltage range (1.4-4.3 V). This strategy provides a new pathway towards the development of high-performance cathode materials for potassium-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Fast Charge Induced Phase Evolution and Element Contribution of Nickel-Rich Layered Cathode for Lithium-Ion Batteries

In nickel-rich layered cathode materials, three transition metals (TM = Ni, Co and Mn) play critical roles in Li storage performance. However, rate-dependent phase evolution and elemental contribution of nickel-rich cathode materials are not well understood, but very important for further design and development of these cathodes in high-power applications. Here, the rate-dependent phase evolution and elemental contribution of LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathode are investigated thoroughly by using time-resolved synchrotron-based in situ X-ray diffraction and absorption techniques. The increase of Ni content in NMC532 has been found to be the main cause of the complex structural changes, resulting in distortion of TM-O 6 octahedron and strong static vibration between TM and O coordination. It is revealed that the fast charge (10C and 30C) of NMC532 leads to intermediate Li-poor phases, shrinking of H2 phase region, and prolonged O1 phase. During high-rate charging, Co is oxidized easily in low voltage region, while Ni mainly dominates charge compensation in high voltage region. It is found that delithiation-induced local structure distortion transfers from Ni to Co sites in fast kinetic process. In conclusion, these findings provide in-depth understanding for the fast charge behavior of Ni-rich layered cathode materials and help to guide further development of advanced high-power lithium-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Electron Delocalization Enables Sulfone-based Single-solvent Electrolyte for Lithium Metal Batteries

Li-metal batteries (LMB), although providing high energy density, face the grand challenge of identifying good electrolyte solvents for cycling. Common solvents are either only stable against lithium metal anode or only stable against LiNi x MnyCo 1-x-y O 2 (NMC) cathode. There is significant effort trying to increase the cathode stability for ether electrolytes, which are in general stable against lithium metal anode. In comparison, there is much less effort trying to increase the anode stability of electrolytes that are stable against NMC cathode. One example is the sulfone-based electrolyte. It has good cathode stability but is hindered from practical application because of (1) high viscosity and poor wetting capability and (2) poor anode stability. Here, we solve these issues by modifying the sulfone molecules using resonance and electron withdrawing effect. The viscosity is significantly reduced by delocalizing the electrons through introducing additional oxygen on the molecular backbone and applying appropriate fluorination. The resulting molecule 2,2,2-trifluoroethyl mesylate (TFEM) has decreased Lewis basicity and less reactivity toward Li + . In conclusion, the electrolyte based on TFEM as single solvent enables cycling of LMB under harsh conditions of low N/P ratio (21 mg/cm 2 NMC811 and 50 μm Li) with 90 % capacity retention after 160 cycles at C/3 discharge rate.

25 ENERGY STORAGE↗

DOE OSTI2023

Electron Delocalization Enables Sulfone-based Single-solvent Electrolyte for Lithium Metal Batteries

Li-metal batteries (LMB), although providing high energy density, face the grand challenge of identifying good electrolyte solvents for cycling. Common solvents are either only stable against lithium metal anode or only stable against LiNi x Mn y Co 1-x-y O 2 (NMC) cathode. There is significant effort trying to increase the cathode stability for ether electrolytes, which are in general stable against lithium metal anode. In comparison, there is much less effort trying to increase the anode stability of electrolytes that are stable against NMC cathode. One example is the sulfone-based electrolyte. It has good cathode stability but is hindered from practical application because of (1) high viscosity and poor wetting capability and (2) poor anode stability. Here, we solve these issues by modifying the sulfone molecules using resonance and electron withdrawing effect. The viscosity is significantly reduced by delocalizing the electrons through introducing additional oxygen on the molecular backbone and applying appropriate fluorination. The resulting molecule 2,2,2-trifluoroethyl mesylate (TFEM) has decreased Lewis basicity and less reactivity toward Li + . The electrolyte based on TFEM as single solvent enables cycling of LMB under harsh conditions of low N/P ratio (21 mg/cm 2 NMC811 and 50 μm Li) with 90 % capacity retention after 160 cycles at C/3 discharge rate.

25 ENERGY STORAGE↗

DOE OSTI2023

Simultaneous Single Crystal Growth and Segregation of Ni-Rich Cathode Enabled by Nanoscale Phase Separation for Advanced Lithium-Ion Batteries

Here, a novel nanoscale phase separation process has been discovered to promote the growth and segregation of single-crystal LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). This process occurs directly during high-temperature calcination without significant agglomeration. The key lies in converting transition metal hydroxide (TM(OH) 2 ) precursors with well-controlled morphology into transition metal oxide (TMO) intermediates before reacting them with lithium salt. The nanoscale redistribution of Ni in TMO, resulting from the concurrent formation of spinel and rock salt phases, helps to deagglomerate the clusters of later-formed NMC811 crystals. The as-prepared single-crystal NMC811 is further validated in a 2Ah pouch cell, demonstrating 1,000 stable cycles. The fundamentally new reaction mechanism of single-crystal growth and segregation provides a new direction for large-scale synthesis of a broad range of single crystals for advanced energy storage.

25 ENERGY STORAGE↗

DOE OSTI2023

Interphasial engineering for Ni-rich NMC cathode materials

Ni-rich LiNi 1-x-y Mn x CoyO 2 , (NMC: 1-x-y ≥ 0.6) are promising cathode materials for lithium-ion batteries (LIBs) due to high reversible capacity and low cost. However, the fast capacity decay and voltage fading caused by interphasial instability requires improvement. The unstable cathodeelectrolyte interphase (CEI) and transition metal (TM) dissolution at higher voltages can lead to the drastic deterioration of electrochemical performance. In this review, recent approaches to novel electrolyte and additive design, cathode engineering including artificial CEI, and doping/coating on the surface of particles or the whole electrode are comprehensively summarized. In conclusion, the importance of multi-model and multi-scale characterization methods in understanding the effects of interphasial chemistry on battery performance is highlighted.

25 ENERGY STORAGE↗

DOE OSTI2023

Anion-tethered Single Lithium-ion Conducting Polyelectrolytes through UV-induced Free Radical Polymerization for Improved Morphological Stability of Lithium Metal Anodes

Single Li + ion conducting polyelectrolytes (SICs), which feature covalently tethered counter-anions along their backbone, have the potential to mitigate dendrite formation by reducing concentration polarization and preventing salt depletion. However, due to their low ionic conductivity and complicated synthetic procedure, the successful validation of these claimed advantages in lithium metal (Li 0 ) anode batteries remains limited. In this study, we fabricated a SIC electrolyte using a single-step UV polymerization approach. The resulting electrolyte exhibited a high Li + transference number (t + ) of 0.85 and demonstrated good Li + conductivity (6.3×10 -5 S/cm at room temperature), which is comparable to that of a benchmark dual ion conductor (DIC, 9.1×10 -5 S/cm). Benefitting from the high transference number of SIC, it displayed a three-fold higher critical current density (2.4 mA/cm 2 ) compared to DIC (0.8 mA/cm 2 ) by successfully suppressing concentration polarization-induced short-circuiting. Additionally, the t + significantly influenced the deposition behavior of Li0, with SIC yielding a uniform, compact, and mosaic-like morphology, while the low t + DIC resulted in a porous morphology with Li 0 whiskers. Using the SIC electrolyte, Li 0 ||LiFePO 4 cells exhibited stable operation for 4500 cycles with 70.5 % capacity retention at 22 °C.

25 ENERGY STORAGE↗

DOE OSTI2023

Anion-tethered Single Lithium-ion Conducting Polyelectrolytes through UV-induced Free Radical Polymerization for Improved Morphological Stability of Lithium Metal Anodes

Single Li + ion conducting polyelectrolytes (SICs), which feature covalently tethered counter-anions along their backbone, have the potential to mitigate dendrite formation by reducing concentration polarization and preventing salt depletion. However, due to their low ionic conductivity and complicated synthetic procedure, the successful validation of these claimed advantages in lithium metal (Li 0 ) anode batteries remains limited. In this study, we fabricated a SIC electrolyte using a single-step UV polymerization approach. The resulting electrolyte exhibited a high Li + transference number (t + ) of 0.85 and demonstrated good Li + conductivity (6.3×10 -5 S/cm at room temperature), which is comparable to that of a benchmark dual ion conductor (DIC, 9.1×10 -5 S/cm). Benefitting from the high transference number of SIC, it displayed a three-fold higher critical current density (2.4 mA/cm 2 ) compared to DIC (0.8 mA/cm 2 ) by successfully suppressing concentration polarization-induced short-circuiting. Additionally, the t + significantly influenced the deposition behavior of Li 0 , with SIC yielding a uniform, compact, and mosaic-like morphology, while the low t + DIC resulted in a porous morphology with Li 0 whiskers. In conclusion, using the SIC electrolyte, Li 0 ||LiFePO 4 cells exhibited stable operation for 4500 cycles with 70.5 % capacity retention at 22 °C.

25 ENERGY STORAGE↗

DOE OSTI2023

Asymmetric Lithium Extraction and Insertion in High Voltage Spinel at Fast Rate

Spinel-structured ordered-LiNi 0.5 Mn 1.5 O 4 (o-LNMO) has experienced a resurgence of interest in the context of reducing scarce elements such as cobalt from lithium-ion battery. O-LNMO undergoes two two-phase reaction at slow rates. However, it is not known if such phenomenon also applies at fast rates. Herein, we investigate the rate-dependent phase transition behavior of o-LNMO through in operando time-resolved X-ray diffraction. The results indicate that a narrow region of solid solution reaction exists for charge and discharge at both slow and fast rate. The overall phase transition is highly asymmetric at fast rates. During fast charge, it is a particle-by-particle mechanism resulting from asynchronized reaction among the particles. Finally, during fast discharge, it is likely a core-shell mechanism involving transition from Li 0+x Ni 0.5 Mn 1.5 O 4 to Li 1+x Ni 0.5 Mn 1.5 O 4 in the outer layer of particles. The Li 0.5 Ni 0.5 Mn 1.5 O 4 phase is suppressed during fast discharge and only appears through Li redistribution upon relaxation.

25 ENERGY STORAGE↗

DOE OSTI2023

Structural and Interphasial Stabilities of Sulfurized Polyacrylonitrile (SPAN) Cathode

Sulfurized polyacrylonitrile (SPAN) has attracted a lot of attention because of its low cost, high capacity, and great reversibility. Due to its structural complexity and amorphous nature, reaction mechanism of SPAN is little understood. Here, for this paper, we study the structural and interphasial changes of SPAN using synchrotron-based pair distribution function (PDF) analysis and soft X-ray absorption spectroscopy (sXAS). PDF identifies key structural features, including C–S bond, sulfur dimer, and sulfur chain in SPAN. The sulfur dimer bridging the pyridine network partially converts to sulfur chain during the first charging. In the following cycles, sulfur chain goes through lithiation and delithiation with reversibility dependent on the electrolytes. SXAS reveals surface changes of SPAN. After the first cycle, a negatively charged carbon or fused benzene layer is formed, on top of which is another layer formed by the electrolyte decomposition. The layer formed by localized high concentration electrolyte is stable during cycling.

25 ENERGY STORAGE↗

DOE OSTI2023

Realizing High Capacity and Zero Strain in Layered Oxide Cathodes via Lithium Dual-Site Substitution for Sodium-Ion Batteries

Sodium-ion batteries have garnered unprecedented attention as an electrochemical energy storage technology, but it remains challenging to design high-energy-density cathode materials with low structural strain during the dynamic (de)sodiation processes. In this paper, we report a P2-layered lithium dual-site-substituted Na 0.7 Li 0.03 [Mg 0.15 Li 0.07 Mn 0.75 ]O 2 (NMLMO) cathode material, in which Li ions occupy both transition-metal (TM) and alkali-metal (AM) sites. The combination of theoretical calculations and experimental characterizations reveals that Li TM creates Na–O–Li electronic configurations to boost the capacity derived from the oxygen anionic redox, while Li AM serves as LiO 6 prismatic pillars to stabilize the layered structure through suppressing the detrimental phase transitions. As a result, NMLMO delivers a high specific capacity of 266 mAh g –1 and simultaneously exhibits the nearly zero-strain characteristic within a wide voltage range of 1.5–4.6 V. Our findings highlight the effective way of dual-site substitution to break the capacity–stability trade-off in cathode materials for advanced rechargeable batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Fe-N 4 O-C Nanoplates Covalently Bonding on Graphene for Efficient CO 2 Electroreduction and Zn-CO 2 Batteries

Electrochemical carbon dioxide (CO 2 ) reduction into value-added products holds great promise in moving toward carbon neutrality but remains a grand challenge due to lack of efficient electrocatalysts. Herein, the nucleophilic substitution reaction is elaborately harnessed to synthesize carbon nanoplates with a Fe-N 4 O configuration anchored onto graphene substrate (Fe-N 4 O-C/Gr) through covalent linkages. Density functional theory calculations demonstrate the unique configuration of Fe-N 4 O with one oxygen (O) atom in the axial direction not only suppresses the competing hydrogen evolution reaction, but also facilitates the desorption of *CO intermediate compared with the commonly planar single-atomic Fe sites. The Fe-N 4 O-C/Gr shows excellent performance in the electroreduction of CO 2 into carbon monoxide (CO) with an impressive Faradaic efficiency of 98.3% at -0.7 V versus reversible hydrogen electrode (RHE) and a high turnover frequency of 3511 h -1 . Furthermore, as a cathode catalyst in an aqueous zinc (Zn)-CO 2 battery, the Fe-N 4 O-C/Gr achieves a high CO Faradaic efficiency (≈91%) at a discharge current density of 3 mA cm -2 and long-term stability over 74 h. Here this work opens up a new route to simultaneously modulate the geometric and electronic structure of single-atomic catalysts toward efficient CO 2 conversion.

25 ENERGY STORAGE↗

DOE OSTI2023

Toward Complete Transformation of Sodium Polysulfides by Regulating the Second-Shell Coordinating Environment of Atomically Dispersed Fe

Room temperature sodium-sulfur (RT Na-S) batteries are highly competitive as potential energy storage devices. Nevertheless, their actually achieved reversible capacities are far below the theoretical value due to incomplete transformation of polysulfides. Herein, atomically dispersed Fe-N/S active center by regulating the second-shell coordinating environment of Fe single atom is proposed. The Fe-N4S2 coordination structure with enhanced local electronic concentration around the Fermi level is revealed via synchrotron radiation X-ray absorption spectroscopy (XAS) and theoretical calculations, which can not only significantly promote the transformation kinetics of polysulfides, but induce uniform Na deposition for dendrite-free Na anode. Here as a result, the obtained S cathode delivers a high initial reversible capacity of 1590 mAh g-1, nearly the theoretical value. Here this work opens up a new avenue to facilitate the complete transformation of polysulfides for RT Na-S batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Toward Complete Transformation of Sodium Polysulfides by Regulating the Second–Shell Coordinating Environment of Atomically Dispersed Fe

Room temperature sodium-sulfur (RT Na-S) batteries are highly competitive as potential energy storage devices. Nevertheless, their actually achieved reversible capacities are far below the theoretical value due to incomplete transformation of polysulfides. Herein, atomically dispersed Fe-N/S active center by regulating the second-shell coordinating environment of Fe single atom is proposed. The Fe–N 4 S 2 coordination structure with enhanced local electronic concentration around the Fermi level is revealed via synchrotron radiation X-ray absorption spectroscopy (XAS) and theoretical calculations, which can not only significantly promote the transformation kinetics of polysulfides, but induce uniform Na deposition for dendrite-free Na anode. As a result, the obtained S cathode delivers a high initial reversible capacity of 1590 mAh g –1 , nearly the theoretical value. Finally, this work opens up a new avenue to facilitate the complete transformation of polysulfides for RT Na-S batteries.

25 ENERGY STORAGE↗