Truss-Core Corrugation
Strength-to-weight ratio exceeds beaded-web design by 60 percent. New corrugation design offers significant weight saving. Truss-core web replaces beaded web of previous corrugation designs.
Davis, Randall C.↗
Engineering topics
Jackson, L. R.
Publications and source records attributed to Jackson, L. R..
Analytical study of reusable flight-weight cryogenic propellant tank design
Explore the source record for details and available documents.
Taylor, A. H.↗
Aerospace vehicle
A dual structure aerospace vehicle is described which has an aeroshell structure and an internally disposed separable and reusable integral tank/thrust structure. The tank/thrust structure is inuslated for cryogenic fuels and the cavity within aeroshell is insulated from the tank/thrust structure. An internal support ring within the cavity serves as an attachment for lugs on the tank/thrust structure via double hinges. The aft end of tank/thrust structure is provided with rocket engines and exit nozzles with a trunnion supporting the tank/thrust structure within the aeroshell.
Jackson, L. R.↗
Fastening Parts Having Mismatched Thermal Coefficients
Fastener eliminates thermal stresses and maintains snug fit. Conicalhead bolt and metal washer main components of fastener that keeps constant tension on carbon/carbon parts regardless of thermal stress. Fastener used in cases where fastened parts have unmatched thermalexpansion coefficients. Does not become looser or tighter as conventional bolts and nuts or rivets do at elevated temperatures.
Jackson, L. R.↗
Structural concepts for future space transportation system orbiters
Explore the source record for details and available documents.
Taylor, A. H.↗
Design study of a slant-nose-cylinder aeroassisted orbital transfer vehicle
A slant-nose-cylinder aeroassisted orbital transfer vehicle configuration is described and analyzed in this study. The vehicle is sized for a 12,000 lb roundtrip payload between low earth orbit and geosynchronous orbit and is assumed to be space based. The vehicle can be fabricated using near-term technologies and is fully reusable. Optional advanced technologies offer potential for improved performance. The vehicle can be assembled on the ground and carried to orbit in the Shuttle cargo bay. An enclosed payload bay is provided in the vehicle to protect payloads during the pass through the atmosphere. The payload bay capacity can be increased from a 10 ft to a 14 ft diameter payload by replacing a modular section of the payload bay in space. The results of calculations used to size the vehicle and to predict its performance and weight are presented.
Blosser, M. L.↗
Daze fasteners
A daze fastener system for connecting two or more structural elements wherein the structural elements and fastener parts have substantially different coefficient of thermal expansion physical property characteristics is employed in this invention. By providing frusto-conical abutting surfaces between the structural elements and fastener parts any differences in thermal expansion/contraction between the parts is translated to sliding motion and avoids deleterious thermal stresses in the connection. An essential feature for isotropic homogeneous material connections is that at least two sets of mating surfaces are required wherein each set of mating surfaces have line element extensions that pass through a common point.
Jackson, L. R.↗
Orbit on demand - Structural analysis finds vertical launchers weigh less
Structural considerations arising from favored design concepts for the next generation on-demand launch vehicles are explored. The two emerging concepts are a two stage fully reusable vertical take-off vehicle (V-2) and a horizontal take-off, two stage subsonic boost launch vehicle (H-2-Sub). Both designs have an 1100 n. mi. cross-range capability, with the V-2 orbiter having small wings with winglets for hypersonic trim and the H-2-Sub requiring larger, swept wings. The rockets would be cryogenic, while airbreathing initial boosters would be either turbofans, turbojets and/or ramjets. Dynamic loading is lower in the launch of a V-2. The TPS is a critical factor due to thinner leading edges than on the Shuttle and may require heat-pipe cooling. Airframe structures made of metal matrix composites have passed finite element simulations of projected loads and can now undergo proof-of-concept tests, although whisker-reinforced materials may be superior once long-whisker technology is developed.
Taylor, A. H.↗
Curved cap corrugated sheet
The report describes a structure for a strong, lightweight corrugated sheet. The sheet is planar or curved and includes a plurality of corrugation segments, each segment being comprised of a generally U-shaped corrugation with a part-cylindrical crown and cap strip, and straight side walls and with secondary corrugations oriented at right angles to said side walls. The cap strip is bonded to the crown and the longitudinal edge of said cap strip extends beyond edge at the intersection between said crown and said side walls. The high strength relative to weight of the structure makes it desirable for use in aircraft or spacecraft.
Davis, R. C.↗
An analytical study of reusable flight-weight cryogenic propellant tank designs
Thermostructural analyses of reusable flight-weight cryogenic tanks for a vertically launched space vehicle have been conducted. An analytical procedure was developed for sizing the tank structure, cryogenic insulation, and thermal protection system. Unstiffened, integrally-stiffened, and honeycomb core sandwich tank skins using aluminum or stainless steel materials were compared for their ability to meet design criteria at least weight. Cryogenic insulation systems were also evaluated, including closed-cell cryogenic foams and evacuated honeycomb core. The results indicate that a 400 F foam-insulated unstiffened-skin aluminum tank structure is the lightest structure for either LOX or LH2 tanks that meet the selected design criteria, but only two to four percent lighter than a stiffened aluminum tank.
Taylor, A. H.↗
Operational modules for space station construction
Identification of an effective space construction concept is a current objective of NASA studies. One concept, described in this memorandum, consists of repetitive use of operational modules, which minimizes on-orbit stay time for the shuttle. A space station constructed of operational modules may benefit from fabrication and system checkout in ground-based facilities, and since the modules are the primary structure of the space station, a minimum of additional structure, and trips and on-orbit stay time of the shuttle are required.
Jackson, L. R.↗
Analytical comparison of two wing structures for Mach 5 cruise airplanes
Previously cited in issue 12, p. 1701, Accession no. A83-29806
Taylor, A. H.↗
Structural efficiency studies of corrugated compression panels with curved caps and beaded webs
Curved cross-sectional elements are employed in structural concepts for minimum-mass compression panels. Corrugated panel concepts with curved caps and beaded webs are optimized by using a nonlinear mathematical programming procedure and a rigorous buckling analysis. These panel geometries are shown to have superior structural efficiencies compared with known concepts published in the literature. Fabrication of these efficient corrugation concepts became possible by advances made in the art of superplastically forming of metals. Results of the mass optimization studies of the concepts are presented as structural efficiency charts for axial compression.
Davis, R. C.↗
Vortex Lift Augmentation by Suction
Lift performance is improved on a 60 degrees swept Gothic wing. Vortex lift at moderate to high angles of attack on highly swept wings used to improve takeoff performance and maneuverability. New design proposed in which suction of propulsion system augments vortex. Turbofan placed at down stream end of leading-edge vortex system induces vortex to flow into inlet which delays onset of vortex breakdown.
Taylor, A. H.↗
Curved Caps Raise Corrugation Strength
Construction concept increases strength-to-weight ratio of corrugated panels. Flat caps are replaced by curved caps in new concept for constructing corrugated panels. Geometry utilizes curved cap for wider cap/web attachment. Beading web prevents local buckling in web while allowing maximum separation between cap strips. Geometry offers significant weight saving over conventional geometry for wide range of loading.
Davis, R. C.↗
Structures and subsystems
New and improved materials combined with efficient structural design concepts have made an essential contribution towards the shaping of the present transportation system (STS), and now, for the replacement of the STS in the year 2005, new materials and novel designs are being studied to identify the technologies which should be developed for a low-cost future space transportation system (FSTS). Three basic structural arrangements were considered for the FSTS orbiter. They include a nonintegral tank arrangement, an integral-tank arrangement, and a hybrid of the first two. Three representative arrangements regarding wall constructions are considered. Each employs a blade-stiffened aluminum tank with reinforced closed-cell-foam cryogenic insulation. Attention is given to an aluminum-alloy structure, a graphite-epoxy structure, a graphite-polyimide structure, a carbon-carbon surface panel structure, a graphite-composite fuselage structure, serviceability and all-weather considerations, and structural concept ratings.
Taylor, A. H.↗
Research in structures and materials for future space transportation systems - An overview
(Previously cited in issue 14, p. 2544, Accession no. A79-34703)
Kelly, H. N.↗
Structural concepts for future space transportation orbiters
Two structural concepts for a fully reusable STS orbiter are compared with respect to weight and the ability to satisfy structural goals. The cryogenic propellant tanks for both concepts use welded, blade-stiffened aluminum skins for leak-free containment and compatibility with LOX and LH2. The tanks are sized primarily by pressure, although some areas are sized by bending and fracture mechanics considerations. The tank concept is regarded as state-of-the-art, even though it requires a closed cell foam insulation with a dry air purge to prevent air liquefaction and ice formation. It is noted that the foam will require testing to verify its design life for use in the STS. One concept has nonintegral tanks suspended inside an insulated aluminum airframe and thrust structure. Here, a durable thermal protection system external insulation is mechanically attached to the airframe, allowing a buckled skin design. The other concept uses a novel structural arrangement consisting of a separate tank/thrust structure that supports a hot advanced-carbon-carbon aeroshell structure.
Taylor, A. H.↗