Search NASA⌕ Search

Engineering topics

Jackson, L. R.

Publications and source records attributed to Jackson, L. R..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

An analytical comparison of two wing structures for Mach 5 cruise airplanes

Mach 5 cruise research conducted by NASA is related to aerodynamics, propulsion, and structures. The study of structures includes the propulsion system, fuselage, and wings. Various studies have shown that the achievement of adequate range is largely dependent on a low structural mass fraction. The present investigation is concerned with a study of two wing structure configurations for Mach 5 aircraft. An uprated version (Ti-6242 replacing B-120 titanium) of the YF-12/SR-71 wing structure is considered. The B-120 titanium structure represents the current art of high speed aircraft wing structures. The YF-12 wing structure was designed about 20 years ago when the analytical methods for calculating thermal stresses were limited. The second wing structural configuration studied in the present investigation also used Ti-6242 materials but replaced the corrugated-beaded panels with diffusion bonded honeycomb-core sandwich panels, and replaced the z-stiffened shear webs with sine-wave stiffened shear webs.

Taylor, A. H.↗
NASA NTRS1982

Multiwall thermal protection system

Multiwall insulating sandwich panels are provided for thermal protection of hypervelocity vehicles and other enclosures. In one embodiment, the multiwall panels are formed of alternate layers of dimpled and flat metal (titanium alloy) foil sheets and beaded scarfed edge seals to provide enclosure thermal protection up to 1000 F. An additional embodiment employs an intermediate fibrous insulation for the sandwich panel to provide thermal protection up to 2000 F. A third embodiment employs a silicide coated columbium waffle as the outer panel skin and fibrous layered intermediate protection for thermal environment protection up to 2500 F. The use of multiple panels on an enclosure facilitate repair and refurbishment of the thermal protection system due to the simple support provided by the tab and clip attachment for the panels.

Jackson, L. R.↗
NASA NTRS1982

Vortex lift augmentation by suction on a 60 deg swept Gothic wing

An experimental investigation was conducted in the Langley high-speed 7- by 10-foot wind tunnel to determine the aerodynamic performance of suction applied near the wing tips above the trailing edge of a 60 deg swept Gothic wing. Moveable suction inlets were symmetrically mounted in the proximity of the trailing edge, and the amount of suction was varied to maximize wing lift. Tests were conducted at Mach 0.15, 0.30, and 0.45, and the angle of attack was varied from -4 to 50 deg. The suction augmentation increases the lift coefficient over the entire range of angle of attack. The lift improvement exceeds the unaugmented wing lift by over 20%. Moreover, the augmented lift exceeds the lift predicted by vortex lattice theory to 30 deg angle of attack. Suction augmentation is postulated to strengthen the vortex system by increasing its velocity and making it more concentrated. This causes the vortex breakdown to be delayed to a higher angle of attack

Taylor, A. H.↗
NASA NTRS1981

Orbiter/launch system

The system includes reusable turbojet propelled booster vehicles releasably connected to a reusable rocket powered orbit vehicle. The coupled orbiter-booster combination takes off horizontally and ascends to staging altitude and speed under booster power with both orbiter and booster wings providing lift. After staging, the booster vehicles fly back to Earth for horizontal landing and the orbiter vehicle continues ascending to orbit.

Jackson, L. R.↗
NASA NTRS1980

A design assessment of multiwall, metallic stand-off, and RSI reusable thermal protection systems including space shuttle application

The design and assessment of reusable surface insulation (RSI), metallic stand off and multiwall thermal protection systems (TPS) is discussed. Multiwall TPS is described in some detail, and analyses useful for design of multiwall are included. Results indicate that multiwall has the potential to satisfy the TPS design goals better than the other systems. The total mass of the stand-off TPS and of the metallic systems require less primary structure mass than the RSI system, since the nonbuckling skin criteria required for RSI may be removed. Continued development of multiwall TPS is required to verify its potential and to provide the necessary data base for design.

Jackson, L. R.↗
NASA NTRS1980

Thermostructural analyses of structural concepts for hypersonic cruise vehicles

A matrix of structural concepts suitable for Mach 5 hydrogen-fueled hypersonic vehicles are defined, and a thermostructural analysis of each is presented. The thermal environment encountered in this flight regime mandates hot structures of superalloy materials or insulated structures using more conventional materials such as titanium, aluminum, and composites. This paper compares the thermostructural performance of several concepts. The various structures are initially sized to carry a 2.5 g subsonic maneuver load. The structural weights are determined, and these components are then evaluated in a transient heating program along with various thermal protection systems to determine the minimum weight combination. The temperature profiles generated for these minimum weight solutions are used as input to a structural analysis along with a model of the appropriate structural concept to calculate thermal stresses. Generally, hot structure concepts have higher thermal stresses. In most cases, the thermal stresses are below the yield strength of the material. It is shown that integral tanks have weights similar to nonintegral tank concepts for the same level of technology. Moreover, an insulated tubular aluminum-composite structure with nonintegral tanks appear attractive for near-term vehicles.

Taylor, A. H.↗
NASA NTRS1979

Research in structures and materials for future space transportation systems - An overview

The paper provides a review of some of the advances of the past decade in structures and materials that have application to future space transportation systems. The paper concentrates on metallic thermal protection systems and structures which could provide the structural efficiency, reliability, and durability dictated by future space utilization requirements. The need for completely reusable, on-board cryogenic fuel tanks is cited as the most challenging technical opportunity and potential thermostructural concepts for tanks are identified. Other critical areas needing technology advances are discussed. Finally, the unique research opportunities offered by the Shuttle Orbiter experiments program for testing structures and thermal protection systems are explored.

Kelly, H. N.↗
NASA NTRS1979

Thermostructural analysis of three structural concepts for reusable space vehicles

Three structural concepts are studied: (1) a state-of-the-art insulated aluminum skin-stringer structure; (2) a near-art insulated evacuated aluminum-alloy honeycomb structure; and (3) an advanced evacuated Rene 41 honeycomb hot structure. Each is evaluated for its thermostructural performance for each of the flight profiles (ascent, entry, and a recall or abort). Results indicate that (1) the state-of-the-art structure encounters negligible thermal stress; (2) the near-art structure has acceptable thermal stresses; and (3) the advanced structure will have thermal stress levels above the material allowables.

Taylor, A. H.↗
NASA NTRS1978

Structural concepts and experimental considerations for a versatile high-speed research airplane

Future aircraft may be hydrogen fueled and fly at hypersonic speeds. The resulting environments will require new structural concepts to satisfy performance goals. Large representative structures will have to be flight tested prior to commitment to a costly vehicle fleet. To perform flight tests, a versatile, economical, high-speed research airplane is defined. Results of this study including experimental considerations for a hypersonic research airplane are reported.

Jackson, L. R.↗
NASA NTRS1978

High-strength blind rivet

Method of upsetting blind head of rivets produces reliable, strong, pressure-tight fastenings.

Jackson, L. R.↗
NASA NTRS1978

Multiwall TPS

A study of multiwall TPS as an alternative to LRSI for the space shuttle indicated that vented multiwall, with foil thicknesses limited to those used in multiwall fabricated to date, is some what heavier than LRSI. With reduced foil thicknesses, multiwall TPS may equal the weight of LRSI. Metallic conduction through multiwall TPS transfered less heat than gas conduction or radiation. Radiation heat transfer was greatest at high temperatures; however, the number of layers selected can significantly reduce radiation. At low-to-intermediate temperatures, gas conduction transfered the most heat through multiwall TPS. Gas conduction may be eliminated by evacuation of panels. Oxidation rates required a trade of foil thickness against life.

Jackson, L. R.↗
NASA NTRS1977

Evaluation of three thermal protection systems in a hypersonic high-heating-rate environment induced by an elevon deflected 30 deg

Three thermal protection systems proposed for a hypersonic research airplane were subjected to high heating rates in the Langley 8 foot, high temperature structures tunnel. Metallic heat sink (Lockalloy), reusable surface insulation, and insulator-ablator materials were each tested under similar conditions. The specimens were tested for a 10 second exposure on the windward side of an elevon deflected 30 deg. The metallic heat sink panel exhibited no damage; whereas the reusable surface insulation tiles were debonded from the panel and the insulator-ablator panel eroded through its thickness, thus exposing the aluminum structure to the Mach 7 environment.

Taylor, A. H.↗
NASA NTRS1977

A fully reusable, horizontal takeoff space transport concept with two small turbojet boosters

Results of a preliminary study of a space transport concept are presented. The concept consists of a winged orbiter containing ascent propellants and two small turbojet-powered winged boosters, used for acceleration to supersonic speeds. The concept offers full reuse and horizontal takeoff from numerous existing airports. With current structure and rocket technology, this transport concept has lower gross weight for a selected payload than single-stage-to-orbit concepts, which require structural advancements. Discussion includes alternatives to the baseline space transport concept which improve performance; such as advanced structures, dual-fuel rockets, and lightweight scramjets for the orbiter. A concept of using a stretched shuttle orbiter instead of an all-new configuration is discussed for two payload-class vehicles.

Jackson, L. R.↗
NASA NTRS1977

Sonic environment tests of an insulator/ablator material

A 50.8 cm (20 inch) square panel of perpyrolized insulator/ablator was subjected to six 30-minute tests at 160 and 158 dB in the Langley Thermo-Acoustic Fatigue Apparatus (TAFA). This environment simulates the aerodynamic and engine noise encountered by a research airplane while in captive flight on the B-52 pylon during takeoff and climb. The pyrolized layer sustained damage in the form of three chips and numerous cracks. The chips occurred during the first test. Some cracking resulted during aerodynamic heating tests, and additional cracking resulted from the sonic environment tests.

Jackson, L. R.↗
NASA NTRS1977

Heat sink structural design concepts for a hypersonic research airplane

Hypersonic research aircraft design requires careful consideration of thermal stresses. This paper relates some of the problems in a heat sink structural design that can be avoided by appropriate selection of design options including material selection, design concepts, and load paths. Data on several thermal loading conditions are presented on various conventional designs including bulkheads, longerons, fittings, and frames. Results indicate that conventional designs are inadequate and that acceptable designs are possible by incorporating innovative design practices. These include nonintegral pressure compartments, ball-jointed links to distribute applied loads without restraining the thermal expansion, and material selections based on thermal compatibility.

Taylor, A. H.↗
NASA NTRS1976

A structural design for a hypersonic research aircraft

A research aircraft is being studied that has potential for large-scale demonstration of advanced propulsive, structural, and aerodynamic technologies for hypersonic application. Versatility is achieved through a large removable payload bay with removable thermal protection, by removable wings, and by the configuration, which considers engine-airframe integration. Design criteria have been applied to an effective heat-sink structure of Lockalloy (Be-38Al), wherein thermal stress alleviation is a prime consideration in the design. Structural analyses are being performed with the SPAR computer program. Results indicate that no critical problems exist and the resulting structural weight is within initial estimates.

Jackson, L. R.↗
NASA NTRS1975

Performance of a hypersonic hot fuselage structure with a carbon dioxide frost projected, nonintegral cryogenic tank

A model which consisted of a hot structure and a nonintegral tank protected by a carbon dioxide frost thermal protection system was tested under the following conditions: (1) room temperature loading and (2) heating and loading corresponding to the Mach 8 flight of an air-breathing launch vehicle. In the simulated flight tests, liquid nitrogen inside the tank was withdrawn at the rate fuel would be consumed. Prior to each simulated flight test, carbon dioxide was cryodeposited in the insulation surrounding the tank; during the tests, subliming CO2 frost absorbed heat and provided a purge gas for the space between the tank and the structure. A method of flame spraying the joints between panels with a nickel-aluminum material was developed to prevent excessive leakage of the purge gas through the outer structure. The tests indicated that the hot structure (with a joint repaired by riveting), the nonintegral tank and suspension system, and the carbon dioxide frost thermal protection system provide a workable concept with predictable performance.

Sharpe, E. L.↗