Search NASA⌕ Search

Engineering topics

Jain, Nikhil

Publications and source records attributed to Jain, Nikhil.

At least 19 records

Tunnel junctions for multijunction solar cells

Tunnel junctions for multijunction solar cells are provided. According to an aspect of the invention, a tunnel junction includes a first layer including p-type AlGaAs, a second layer including n-type GaAs, wherein the second layer is a quantum well, and a third layer including n-type AlGaAs or n-type lattice matched AlGaInP. The quantum well can be GaAs or AlxGaAs with x being more than about 40%, and lattice matched GaInAsNSb in the Eg range of from about 0.8 to about 1.4 eV.

Jain, Nikhil↗

Mitigating Inter-Job Interference via Process-Level Quality-of-Service

Jobs on most high-performance computing (HPC) systems share the network with other concurrently executing jobs. Network sharing leads to contention that can severely degrade performance. Here we investigate the use of Quality of Service (QoS) mechanisms to reduce the negative impacts of network contention. QoS allows users to manage resource sharing between network flows and to provide bandwidth guarantees to specific flows. Our results show that careful use of QoS reduces the impact of network contention for specific jobs, resulting in up to a 40% performance improvement. In some cases, it completely eliminates the impact of contention. It achieves these improvements with limited negative impact to other jobs; any job that experiences performance loss typically degrades less than 5%, and often much less. Our approach can help ensure that HPC machines maintain high levels of throughput as per-node compute power continues to increase faster than network bandwidth.

97 MATHEMATICS AND COMPUTING↗

Evaluating Trade-offs in Potential Exascale Interconnect Technologies

This report details work to study trade-offs in topology and network bandwidth for potential interconnects in the exascale (2021-2022) timeframe. The work was done using multiple interconnect models across two parallel discrete event simulators. Results from each independent simulator are shown and discussed and the areas of agreement and disagreement are explored.

97 MATHEMATICS AND COMPUTING↗

III-V/Si Tandem Cells Utilizing Interdigitated Back Contact Si Cells and Varying Terminal Configurations

Integrating wide-bandgap III-V with Si solar cells has been shown to yield higher efficiencies than Si alone: As also presented at this conference, four-terminal efficiencies exceeding 32% have been attained. In this contribution, independent and electrically connected operation of the subcells in such tandem cells is examined. The optics of the tandem cell change significantly if a conducting interconnect, rather than an insulating glass slide, is required between the subcells. These effects are studied, and optically optimized structures for different types of tandem cell operation are presented. It is found that minimizing reflection at the conductive interface between the two cells while maintaining conductivity is the key challenge faced in such devices.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Visualizing Hierarchical Performance Profiles of Parallel Codes Using CallFlow

Calling context trees (CCTs) couple performance metrics with call paths, helping understand the execution and performance of parallel programs. To identify performance bottlenecks, programmers and performance analysts visually explore CCTs to form and validate hypotheses regarding degraded performance. However, due to the complexity of parallel programs, existing visual representations do not scale to applications running on a large number of processors. In this work, we present CallFlow, an interactive visual analysis tool that provides a high-level overview of CCTs together with semantic refinement operations to progressively explore CCTs. Using a flow-based metaphor, we visualize a CCT by treating execution time as a resource spent during the call chain, and demonstrate the effectiveness of our design with case studies on large-scale, production simulation codes.

97 MATHEMATICS AND COMPUTING↗

AlGaInP/GaAs Tandem Solar Cells for Power Conversion at 400 degrees C and 1000X Concentration

We demonstrate dual junction (Al)GaInP/GaAs solar cells that are designed to operate at 400 degrees C and 1000X concentration. The cells have stable front metallization and anti-reflection coatings at 400 degrees C. The choice of bandgaps was first estimated using ideal solar cell characteristics and then refined based on empirical data. We show power conversion efficiency of ~15 +/- 1% for AR-coated cells at 400 degrees C and high concentration, with pathways to improved performance.

14 SOLAR ENERGY↗

Absorption Enhancement in InGaAsP/InGaP Quantum Well Solar Cells

InGaAsP/InGaP quantum well (QW) structure is a potential candidate for subcells in next-generation multijunction solar cells because of its tunable bandgap (1.5-1.8 eV). However, the insufficient light absorption in the QWs has previously limited the sub-bandgap quantum efficiency (QE) to less than 25%. We report on the development of InGaAsP/InGaP superlattice solar cell with improved sub-bandgap QE exceeding 75% and bandgap-voltage offset of 0.40 V. The enhancements were accomplished by reducing the background doping in the QW region, monitoring the stress evolution during growth, modifying the QW design to grow thicker wells and processing the devices with optical reflector to enhance light absorption.

14 SOLAR ENERGY↗

GaAs Solar Cells on V-Grooved Silicon via Selective Area Growth

Interest in integrating III-Vs onto Si has recently resurged as a promising pathway towards high-efficiency, lowcost tandem photovoltaics. Here, we present single-junction GaAs solar cells grown monolithically on on-axis Si (001) substrates using V-grooves, selective area growth, and aspect ratio trapping to mitigate defect formation without the use of expensive, thick graded buffers, along with homoepitaxially grown GaAs solar cell test structures. The GaAs buffer grown directly on Si is free of antiphase domains and exhibits a relatively low TDD of 4 x 107 cm-2, despite the lack of a graded buffer. These demonstration solar cells show promise for further improvements to III-V/Si tandems to enable cost-competitive photovoltaics.

14 SOLAR ENERGY↗

GaLnAsP Solar Cells Grown by Hydride Vapor Phase Epitaxy for One-Sun & Low-Concentration III-V/Si Photovoltaics

Dynamic hydride vapor phase epitaxy (D-HVPE) has recently reemerged as a low-cost alternative to metalorganic chemical vapor deposition (MOCVD) for the growth of highefficiency III-V solar cells. Quaternary GaInAsP solar cells in the bandgap range of ~1.6-1.8 eV are promising top-cell candidates for III-V/Si tandem solar cells. In this work, we report on the development of lattice-matched GaInAsP (Eg~1.66 eV) solar cells grown via low-cost HVPE at very high growth rates of ~0.7 um/min (~42 um/h). We demonstrate for the first time HVPE grown passivated GaInAsP homojunction solar cells that show substantial improvement in the short-wavelength photoresponse attributed to the incorporation of a GaInP window layer. The heterointerfaces in these multilayer devices were characterized by transmission electron microscopy. The best device achieved a certified one-sun efficiency of 18.7% under AM1.5G, demonstrating the viability of HVPE to grow multilayered structures comprising ternary and quaternary alloys. This work represents a promising step towards low-cost III-V/Si tandem photovoltaics with one-sun efficiencies exceeding 30%.

14 SOLAR ENERGY↗

GaAs Solar Cells on Nanopatterned Si Substrates

Integrating III-Vs onto Si is a promising route toward tandem photovoltaics and cost mitigation of III-V substrates. While many III-V/Si photovoltaic integration approaches have been studied, epitaxial growth on Si allows for fewer processing steps compared to other approaches. However, current epitaxial pathways utilize expensive techniques, such as thermal cycle annealing or thick buffer layers to control defect densities, undermining the low-cost goal of integrating III-Vs with Si. Here, we present single-junction GaAs solar cells grown directly on Si using selective area growth as an alternative low-cost technique to control material quality with a much thinner buffer. We demonstrate a 10.4%-efficient GaAs device grown on a V-grooved Si substrate, which achieved an antiphase domain-free III-V/Si interface and a threading dislocation density of 2 x 107 cm-2, despite the lack of a graded buffer. We compare this growth on V-grooved Si to solar cells grown on polished Si with and without a patterned silica buffer layer, which demonstrate efficiencies of 6.5% and 6.8%, respectively; the polished Si was patterned using nanoimprint lithography, which is a low-cost patterning technique compatible with III-V selective area growth. Cracking is found to be a critical challenge that hinders solar cell performance and is exacerbated by the V-grooved Si surface topography. The results in this paper provide a promising pathway toward high-efficiency, low-cost III-V/Si tandem photovoltaics.

14 SOLAR ENERGY↗

Tunable Bandgap GaInAsP Solar Cells With 18.7% Photoconversion Efficiency Synthesized by Low-Cost and High-Growth Rate Hydride Vapor Phase Epitaxy

As market-dominant Si solar cell technology approaches its practical efficiency limit of 27.1%, a key challenge for the photovoltaic industry is to search for a low-cost ~1.7 eV top cell that can enable cost-competitive tandems with solar-to-electricity conversion efficiency exceeding 30%. III-V semiconductors offer tunable bandgap and unparalleled efficiencies for tandem devices. However, their high manufacturing cost has been the biggest impediment for market entry. Hydride vapor phase epitaxy (HVPE) has recently reemerged as a promising low-cost alternative to incumbent metalorganic chemical vapor deposition (MOCVD) for III-V solar cells. Here, we show the first demonstration of ~1.7 eV GaInAsP solar cells that achieve nearly 19% photoconversion efficiency synthesized by HVPE. The unprecedented growth rate of ~42 um/h achieved via HVPE (~10x faster than conventional MOCVD) allowed the device layers to be deposited in less than seven minutes. Nearly abrupt and chemically distinct heterointerfaces were attained in spite of high-growth rates, which are known to exacerbate phase separation in GaInAsP alloys. Demonstration of ideality factor of n=1 at max power point highlight the advancements in growth optimization and device design. The results presented here highlight a promising path toward tunable bandgap, high-growth rate, low-cost, and high-efficiency GaInAsP devices for direct solar-to-electricity and solar-to-hydrogen conversion.

14 SOLAR ENERGY↗

High-efficiency inverted metamorphic 1.7/1.1 eV GaInAsP/GaInAs dual-junction solar cells

Photovoltaic conversion efficiencies of 32.6 +/- 1.4% under the AM1.5 G173 global spectrum, and 35.5 +/- 1.2% at 38-suns concentration under the direct spectrum, are demonstrated for a monolithic, dual-junction 1.7/1.1 eV solar cell. The tandem cell consists of a 1.7 eV GaInAsP top-junction grown lattice-matched to a GaAs substrate, followed by a metamorphic 1.1 eV GaInAs junction grown on a transparent, compositionally graded metamorphic AlGaInAs buffer. This bandgap combination is much closer to the dual-junction optimum and offers headroom for absolute 3% improvement in efficiency, in comparison to the incumbent lattice-matched GaInP/GaAs (~1.86/1.41 eV) solar cells. The challenge of growing a high-quality 1.7 eV GaInAsP solar cell is the propensity for phase separation in the GaInAsP alloy. The challenge of lattice-mismatched GaInAs solar cell growth is that it requires minimizing the residual dislocation density during the growth of a transparent compositionally graded buffer to enable efficient metamorphic tandem cell integration. Transmission electron microscopy reveals relatively weak composition fluctuation present in the 1.7 eV GaInAsP alloy, attained through growth control. The threading dislocation density of the GaInAs junction is ~1 x 10^6 cm-2, as determined from cathodoluminescence measurements, highlighting the quality of the graded buffer. These material advances have enabled the performance of both junctions to reach over 80% of their Shockley-Queisser limiting efficiencies, with both the subcells demonstrating a bandgap-voltage offset, WOC (=Eg/q-VOC), of ~0.39 V.

14 SOLAR ENERGY↗

(Al)GaInP/GaAs Tandem Solar Cells for Power Conversion at Elevated Temperature and High Concentration

We demonstrate dual-junction (Al)GaInP/GaAs solar cells designed for operation at 400 degrees C and 1000x concentration. For the top junction, we compare (Al)GaInP solar cells with room-temperature bandgaps ranging from 1.9 to 2.0 eV. At 400 degrees C, we find that ~1.9 eV GaInP solar cells have a higher open-circuit voltage and a lower sheet resistance than higher bandgap (Al)GaInP solar cells, giving them a clear advantage in a tandem configuration. Dual-junction GaInP/GaAs solar cells are fabricated, and we show temperature-dependent external quantum efficiency, illuminated current-voltage, and concentrator measurements from 25 degrees C to 400 degrees C. We measure a power conversion efficiency of 16.4% +/- 1% at 400 degrees C and 345 suns for the best dual-junction cell, and discuss multiple pathways to improve the performance further. After undergoing a 200 h soak at 400 degrees C, the dual-junction device shows a relative loss in efficiency of only ~1%.

14 SOLAR ENERGY↗

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

We propose practical six-junction (6J) inverted metamorphic multijunction (IMM) concentrator solar cell designs with the potential to exceed 50% efficiency using moderately high quality junction materials. We demonstrate the top three junctions and their monolithic integration lattice matched to GaAs using 2.1-eV AlGaInP, 1.7-eV AlGaAs or GaInAsP, and 1.4-eV GaAs with external radiative efficiencies >0.1%. We demonstrate tunnel junctions with peak tunneling current >400 A/cm 2 that are transparent to <2.1-eV light. We compare the bottom three GaInAs(p) junctions with bandgaps of 1.2, 1.0, and 0.7 eV grown on InP and transparent metamorphic grades with low dislocation densities. The solution to an integration challenge resulting from Zn diffusion in the GaAs junction is illustrated in a five-junction IMM. Excellent 1-sun performance is demonstrated in a complete 6J IMM device with VOC = 5.15 V, and a promising pathway toward >50% efficiency at high concentrations is presented.

14 SOLAR ENERGY↗

Tunnel Junction Development Using Hydride Vapor Phase Epitaxy

We demonstrate for the first time III-V tunnel junctions grown using hydride vapor phase epitaxy (HVPE) with peak tunneling currents >8 A/cm 2 , sufficient for operation of a multijunction device to several hundred suns of concentration. Multijunction solar cells rely on tunneling interconnects between subcells to enable series connection with minimal voltage loss, but tunnel junctions have never been shown using the HVPE growth method. HVPE has recently reemerged as a low-cost growth method for high-quality III-V materials and devices, including the growth of high-efficiency III-V solar cells. We previously showed single-junction GaAs solar cells with conversion efficiencies of ~24% with a path forward to equal or exceed the practical efficiency limits of crystalline Si. Moving to a multijunction device structure will allow for even higher efficiencies with minimal impact on cost, necessitating the development of tunnel interconnects. Here in this paper, we demonstrate the performance of both isolated HVPE-grown tunnel junctions, as well as single-junction GaAs solar cell structures with a tunnel junction incorporated into the contact region. We observe no degradation in device performance compared to a structure without the added junction.

14 SOLAR ENERGY↗

Trace Replay and Network Simulation Tool

TraceR Is a trace replay tool built upon the ROSS-based CODES simulation framework. TraceR can be used for predicting network performance and understanding network behavior by simulating messaging In High Performance Computing applications on interconnection networks.

Jain, Nikhil↗