Search NASA⌕ Search

Engineering topics

Jang, J.

Publications and source records attributed to Jang, J..

A sustained high-temperature fusion plasma regime facilitated by fast ions

Nuclear fusion is one of the most attractive alternatives to carbon-dependent energy sources. Harnessing energy from nuclear fusion in a large reactor scale, however, still presents many scientific challenges despite the many years of research and steady advances in magnetic confinement approaches. State-of-the-art magnetic fusion devices cannot yet achieve a sustainable fusion performance, which requires a high temperature above 100 million kelvin and sufficient control of instabilities to ensure steady-state operation on the order of tens of seconds. Here, in this study, we report experiments at the Korea Superconducting Tokamak Advanced Research device producing a plasma fusion regime that satisfies most of the above requirements: thanks to abundant fast ions stabilizing the core plasma turbulence, we generate plasmas at a temperature of 100 million kelvin lasting up to 20 seconds without plasma edge instabilities or impurity accumulation. A low plasma density combined with a moderate input power for operation is key to establishing this regime by preserving a high fraction of fast ions. This regime is rarely subject to disruption and can be sustained reliably even without a sophisticated control, and thus represents a promising path towards commercial fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synchronous High-frequency Distributed Readout For Edge Processing At The Fermilab Main Injector And Recycler

The Main Injector (MI) was commissioned using data acquisition systems developed for the Fermilab Main Ring in the 1980s. New VME-based instrumentation was commissioned in 2006 for beam loss monitors (BLM)[2], which provided a more systematic study of the machine and improved displays of routine operation. However, current projects are demanding more data and at a faster rate from this aging hardware. One such project, Real-time Edge AI for Distributed Systems (READS), requires the high-frequency, low-latency collection of synchronized BLM readings from around the approximately two-mile accelerator complex. Significant work has been done to develop new hardware to monitor the VME backplane and broadcast BLM measurements over Ethernet, while not disrupting the existing operations critical functions of the BLM system. This paper will detail the design, implementation, and testing of this parallel data pathway.

43 PARTICLE ACCELERATORS↗

Drilling of sub-100 μm hourglass-shaped holes in diamond with femtosecond laser pulses

We present images of microholes drilled in diamond using a homemade femtosecond Yb : KGW laser. We use a femtosecond laser source emitting pulses with a duration of 230 fs at a wavelength of 1030 nm, the focusing spot size amounting to 8.9 μm. The effect of the pulse energy and the number of pulses on the microhole geometry (hole diameter, circularity, taper angle, and drilling quality) is evaluated. The obtained results demonstrate the feasibility of drilling of hourglass-shaped holes in a diamond sample, which have similar diameters at the hole entrance (92 μm) and exit (95 μm), but a much smaller diameter (28 μm) at a certain waist section inside the hole. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Use of NH4Cl-H2O Analogue Castings to Model Aspects of Continuous Casting: Columnar-Equiaxed Grain Transition and Crystal Sedimentation Rates - Part 2

In this paper, aspects of the columnar-equiaxed transition with particular reference to the rates of sedimentation of equiaxed crystals and analysis of measured values are considered. The attempt is made to compare data from an aqueous analogue system with those expected in a metal, specifically, from NH4CI-70 wt-%H20 and Fe-0.2 wt-%C.

Jang, J.↗

Use of NH4Cl-H2O Analogue Castings to Model Aspects of Continuous Casting: Asymmetry in Inclined Moulds - Part 1

Crystallisation of NH4Cl from aqueous solutions has been used to examine grain formation in a configuration similar to that existing in the curved mould of a continuous, steel casting machine. The observations show how falling equiaxed crystals accumulate at the lower (outer) columnar front earlier than at the upper (inner) front and, thus, lead to an asymmetric grain structure. The usefulness of the aqueous system as a realistic model for steel casting is discussed in terms of relative temperature profiles, materials properties, and observed columnar and eutectic growth rates.

Jang, J.↗