Search NASA⌕ Search

Engineering topics

Kamat, M. P.

Publications and source records attributed to Kamat, M. P..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

On a concurrent element-by-element preconditioned conjugate gradient algorithm for multiple load cases

Element-by-element preconditioned conjugate gradient (EBE-PCG) algorithms have been advocated for use in parallel/vector processing environments as being superior to the conventional LDL(exp T) decomposition algorithm for single load cases. Although there may be some advantages in using such algorithms for a single load case, when it comes to situations involving multiple load cases, the LDL(exp T) decomposition algorithm would appear to be decidedly more cost-effective. The authors have outlined an EBE-PCG algorithm suitable for multiple load cases and compared its effectiveness to the highly efficient LDL(exp T) decomposition scheme. The proposed algorithm offers almost no advantages over the LDL(exp T) algorithm for the linear problems investigated on the Alliant FX/8. However, there may be some merit in the algorithm in solving nonlinear problems with load incrementation, but that remains to be investigated.

Watson, Brian↗
NASA NTRS1984

Crash Simulation and Nonlinear Structural Analysis

Behavior of structures composed of trusses, frames and membranes modeled. Crash simulation analysis useful in developing understanding of multifaceted relationship between complex structural configuration, such as aircraft, and response during crash. CDC version written in FORTRAN IV.

Kamat, M. P.↗
NASA NTRS1983

Robust penalty method for structural synthesis

The Sequential Unconstrained Minimization Technique (SUMT) offers an easy way of solving nonlinearly constrained problems. However, this algorithm frequently suffers from the need to minimize an ill-conditioned penalty function. An ill-conditioned minimization problem can be solved very effectively by posing the problem as one of integrating a system of stiff differential equations utilizing concepts from singular perturbation theory. This paper evaluates the robustness and the reliability of such a singular perturbation based SUMT algorithm on two different problems of structural optimization of widely separated scales. The report concludes that whereas conventional SUMT can be bogged down by frequent ill-conditioning, especially in large scale problems, the singular perturbation SUMT has no such difficulty in converging to very accurate solutions.

Kamat, M. P.↗
NASA NTRS1983

Identification of large flexible structures mass/stiffness and damping from on-orbit experiments

Two methods for identifying the mass, damping and stiffness matrices of a linear vibrating system are presented. Both methods require the measurement of acceleration, velocity and displacement at various locations of the system. In the first method, the response of the system subjected to known forces is used while the second method employs the free vibration data. The unknown parameters are recovered through the standard least squares procedure. Numerical results are presented for several examples.

Hendricks, S. L.↗
NASA NTRS1983

A new strategy for stress analysis using the finite element method

In the paper the authors examine the effectiveness of the Powell-Toint strategy for evaluating the Hessian of the potential energy surface of a finite element model that can be used for linear stress analysis and transient response predictions of structures. Cases for which the Powell-Toint strategy may be cost-effective with the conventional method of stress analysis are identified.

Kamat, M. P.↗
NASA NTRS1983

A quasi-Newton versus a homotopy method for nonlinear structural analysis

The globally convergent quasi-Newton minimization algorithm and the homotopy algorithms are discussed in detail and their effectiveness in solving certain classes of highly nonlinear problems of structural analysis is demonstrated. The application of the double dogleg strategy controls the directions and step-lengths of the quasi-Newtonian algorithm and overcomes the problem of nonpositive definite Hessians being produced during the iteration process. The algorithms are applied to a centrally loaded clamped beam, the snap-through of a shallow arch, and a shallow reticulated dome.

Kamat, M. P.↗
NASA NTRS1982

Minimization versus homotopy algorithms

The relative merits and demerits of the minimization techniques are assessed using globally convergent quasi-Newton algorithms on the one hand and the homotopy algorithms on the other hand for the solution of problems of nonlinear structural analysis. Like the homotopy algorithms, the globally convergent quasi-Newton algorithms are equally suited for the solution of the nonlinear equations of structural analysis directly without having to pose the problem as an equivalent minimization problem. In the close neighborhood of the limit and bifurcation points quasi-Newton algorithms experience difficulties. Homotopy algorithms are robust for practically all types of nonlinear problems but are computationally not as cost effective since they provide an extremely accurate prediction of the response by calculating it as a large number of points. Globally convergent algorithms can perform well with very approximate Hessians, while homotopy algorithms require extremely accurate Hessians. While quasi-Newton algorithms can be very easily structured to exploit sparsity and symmetry, homotopy algorithms are not presently so structured and would require special modifications for exploitation of such features without sacrificing robustness and global convergence.

Kamat, M. P.↗
NASA NTRS1982

Modified SUMT for structural synthesis

The concepts of the singular perturbation theory are employed to modify the SUMT (Sequential Unconstrained Minimization Technique) algorithm of Fiacco-McCormick (1968) in order to make it more robust and reliable. The algorithm, which uses a sequence of penalty parameters to convert a constrained problem into a sequence of unconstrained problems, suffers from the need to minimize an ill-conditioned penalty function. By using the modified SUMT algorithm on two different structural optimization problems, it is shown that the singular perturbation SUMT easily converges to accurate solutions.

Kamat, M. P.↗
NASA NTRS1981

Recent developments in quasi-Newton methods for structural analysis and synthesis

Unlike the Newton-Raphson method, quasi-Newton methods by virture of the updates and step length control procedures are globally convergent and hence better suited for the solution of nonlinear problems of structural analysis and synthesis. Extension of quasi-Newton algorithms to large scale problems has led to the development of sparse update algorithms and to economical strategies for evaluating sparse Hessians. Ill-conditioning problems have led to the development of self-scaled variable metric and conjugate gradient algorithms, as well as the use of the singular perturbation theory. This paper emphasizes the effectiveness of such quasi-Newton algorithms for nonlinear structural analysis and synthesis.

Kamat, M. P.↗
NASA NTRS1980

Three dimensional inelastic finite element analysis of laminated composites

Formulations of the inelastic response of laminated composites to thermal and mechanical loading are used as the basis for development of the computer NALCOM (Nonlinear Analysis of Laminated Composites) computer program which uses a fully three dimensional isoparametric finite element with 24 nodes and 72 degrees of freedom. An incremental solution is performed with nonlinearities introduced as pseudoloads computed for initial strains. Equilibrium iteration may be performed at every step. Elastic and elastic-plastic response of boron/epoxy and graphite/epoxy graphite/epoxy and problems of curing 0/90 sub s Gr/Ep laminates with and without circular holes are analyzed. Mechanical loading of + or - 45sub s Gr/Ep laminates is modeled and symmetry conditions which exist in angle-ply laminates are discussed. Results are compared to experiments and other analytical models when possible. All models are seen to agree reasonably well with experimetnal results for off-axis tensile coupons. The laminate analyses show the three dimensional effects which are present near holes and free corners.

Griffin, O. H., Jr.↗
NASA NTRS1980

Nonlinear transient analysis by energy minimization: A theoretical basis for the ACTION computer code

The formulation basis for establishing the static or dynamic equilibrium configurations of finite element models of structures which may behave in the nonlinear range are provided. With both geometric and time independent material nonlinearities included, the development is restricted to simple one and two dimensional finite elements which are regarded as being the basic elements for modeling full aircraft-like structures under crash conditions. Representations of a rigid link and an impenetrable contact plane are added to the deformation model so that any number of nodes of the finite element model may be connected by a rigid link or may contact the plane. Equilibrium configurations are derived as the stationary conditions of a potential function of the generalized nodal variables of the model. Minimization of the nonlinear potential function is achieved by using the best current variable metric update formula for use in unconstrained minimization. Powell's conjugate gradient algorithm, which offers very low storage requirements at some slight increase in the total number of calculations, is the other alternative algorithm to be used for extremely large scale problems.

Kamat, M. P.↗
NASA NTRS1980

Energy minimization versus pseudo force technique for nonlinear structural analysis

The effectiveness of using minimization techniques for the solution of nonlinear structural analysis problems is discussed and demonstrated by comparison with the conventional pseudo force technique. The comparison involves nonlinear problems with a relatively few degrees of freedom. A survey of the state-of-the-art of algorithms for unconstrained minimization reveals that extension of the technique to large scale nonlinear systems is possible.

Kamat, M. P.↗
NASA NTRS1980

User's manual to the ACTION computer code

The form and interpretation of input and output data are defined. The Analysis of Crash Transients in Inelastic and Geometrically Nonlinear structures program (ACTION) performs nonlinear transient response analysis of structures subjected to time varying loads, allowing for nonlinear, time independent material properties and large geometry changes.

Kamat, M. P.↗
NASA NTRS1979

Nonlinear structural crash dynamics analyses

Presented in this paper are the results of three nonlinear computer programs, KRASH, ACTION and DYCAST used to analyze the dynamic response of a twin-engine, low-wing airplane section subjected to a 8.38 m/s (27.5 ft/s) vertical impact velocity crash condition. This impact condition simulates the vertical sink rate in a shallow aircraft landing or takeoff accident. The three distinct analysis techniques for nonlinear dynamic response of aircraft structures are briefly examined and compared versus each other and the experimental data. The report contains brief descriptions of the three computer programs, the respective aircraft section mathematical models, pertinent data from the experimental test performed at NASA Langley, and a comparison of the analyses versus test results. Cost and accuracy comparisons between the three analyses are made to illustrate the possible uses of the different nonlinear programs and their future potential.

Hayduk, R. J.↗
NASA NTRS1978

Nonlinear transient analysis via energy minimization

The formulation basis for nonlinear transient analysis of finite element models of structures using energy minimization is provided. Geometric and material nonlinearities are included. The development is restricted to simple one and two dimensional finite elements which are regarded as being the basic elements for modeling full aircraft-like structures under crash conditions. The results indicate the effectiveness of the technique as a viable tool for this purpose.

Kamat, M. P.↗
NASA NTRS1978

Efficiency of unconstrained minimization techniques in nonlinear analysis

Unconstrained minimization algorithms have been critically evaluated for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth, first, or second order depending upon the highest derivative of the function required by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives clearly suggests using analytically derived gradients instead of finite difference approximations. The use of analytic gradients results in better control of the number of minimizations required for convergence to the exact solution.

Kamat, M. P.↗
NASA NTRS1978

A critical evaluation of the minimization techniques as applied to nonlinear structural analyses

This paper identifies the potential for unconstrained minimization algorithms of mathematical programming to be cost-effective with other conventional techniques of transient nonlinear structural analysis. With this in mind the authors have attempted to critically evaluate a few of the most commonly used algorithms for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth order, first order and second order depending upon the order of the derivative of the function called for by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives derived on the basis of finite difference operations clearly suggest using analytically derived derivatives to obtain better control on the number of minimizations required for convergence to the exact solution.

Kamat, M. P.↗