Engineering topics
Publications and source records attributed to Kumar, A..
The paper discusses mixing problems in hypervelocity scramjet combustors. Techniques for providing turbulence and/or mixing enhancement are described. One such technique, the oscillating shock interaction, is studied numerically and options for producing oscillatory shock waves for mixing augmentation in scramjet combustors are discussed.
NASCRIN program analyzes two-dimensional flow fields in supersoniccombustion ramjet (scramjet) inlets. Solves two-dimensional Euler or Navier-Stokes equations in conservative form by unsplit, explicit, two-step finite-difference method. More recent explicit/implicit, two-step scheme incorporated by analysis of viscous flow. Algebraic, two-layer eddy-viscosity model used for turbulent-flow calculations. Vectorized version, written for CDC CYBER 205, whereas scalar version, can be run on CRAY or other scalar computers.
A set of partial differential equations, describing the two-dimensional supersonic chemically-reacting flow of the hydrogen-air system, is formulated such that the equations are parabolic in the streamwise direction. A fully-implicit fully-coupled finite-difference algorithm is used to develop a computer code which solves the governing equations by marching in the streamwise direction. The combustion process is modeled by a two-step finite-rate chemistry whereas turbulence is simulated by an algebraic turbulence model. Results of two calculations of internal supersonic reacting flow show fairly good agreement with the results obtained by the more costly full Navier-Stokes procedure.
A general formulation is presented to investigate the transient radiative interaction in nongray absorbing-emitting species between two parallel plates. Special attention is directed to investigate the radiative interaction in a system initially at a uniform reference temperature where suddenly the temperature of the bottom plate is reduced to a lower but constant temperature. The interaction is considered for the case of radiative equilibrium as well as for combined radiation and conduction. General as well as limiting forms of the govering equations are presented and solutions are obtained numerically by employing the method of variation of parameters. Specific results are obtained for CO, CO2, H2O, and OH. The information on species H2O and OH is of special interest for the proposed scramjet engine application. The results demonstrate the relative ability of different species for radiative interactions.
A three-dimensional Navier-Stokes code is used to study the flow through an inlet with a rectangular capture area, but with circular or essentially circular internal cross-sections. The inlet may have a center body extending partially or fully over the length of the inlet. Calculations are made under a variety of geometrical constraints imposed on the inlet cross-sections to study the flow quality in the inlet. It is observed that for this class of inlets, the boundary layer has a tendency to thicken and separate readily due to the adverse pressure gradient caused by the continuous compression in the inlet. Since no experimental results are yet available, this paper has presented only the numerical results from the present analysis.
Flow through a two-dimensional duct with supersonic inflow is numerically investigated, from the viewpoint of the formation of Mach reflection, aerodynamic choking, and the possibility of constructing a curve similar to that for the quasi-one-dimensional flow in a converging-diverging duct. Such a curve can be used to determine whether a duct with a certain area ratio will or will not choke for a given inflow Mach number. Plots of pressure and mass flux contours are obtained for a given duct configuration. It is found that the two-dimensional flow always chokes at a higher Mach number than the corresponding quasi-one-dimensional flow for a given throat/inlet flow area ratio.
NASCRIN analyzes two-dimensional flow fields in supersonic combustion ramjet (scramjet) inlets. Solves two-dimensional Euler or Navier-Strokes equations in conservative form by unsplit, explicit, two-step finitedifference method. More recent explicit/implicit, two-step scheme also incorporated for viscous flow analysis. Algebraic, two-layer eddy-viscosity model used for turbulent flow calculations.
A multi-stage Runge-Kutta method is analyzed for solving the two-dimensional Euler equations for external and internal flow problems. Subsonic, supersonic and, highly supersonic flows are studied. Various techniques for accelerating the convergence to a steady state are described and analyzed. Effects of the grid aspect ratio on the rate of convergence are evaluated. An enthalpy damping technique applicable to supersonic flows is described in detail. Numerical results for supersonic flows containing both oblique and normal shocks are presented confirming the efficiency of the method.
A multi-stage Runge-Kutta method is analyzed for solving the two-dimensional Euler equations for external and internal flow problems. Subsonic, supersonic and, highly supersonic flows are studied. Various techniques for accelerating the convergence to a steady state are described and analyzed. Effects of the grid aspect ratio on the rate of convergence are evaluated. An enthalpy damping technique applicable to supersonic flows is described in detail. Numerical results for supersonic flows containing both oblique and normal shocks are presented confirming the efficiency of the method.
Computational Fluid Dynamics (CFD) methods are presently applied to the design and analysis of scramjet propulsion systems for missiles and aircraft operating at speeds in excess of Mach 5, in forms ranging from simple inviscid codes for parametric studies of inlet geometries to Navier-Stokes codes incorporating chemistry models which address complex scramjet combustion phenomena. Attention is given to the development history of CFD for the hypersonic regime, as well as to scramjet flowfield modeling in inlets, combustors and nozzles, and prospective development trends.
The governing equations of two-dimensional chemically reacting flows are presented together with a global two-step chemistry model for H2-air combustion. The explicit unsplit MacCormack finite difference algorithm is used to advance the discrete system of the governing equations in time until convergence is attained. The source terms in the species equations are evaluated implicitly to alleviate stiffness associated with fast reactions. With implicit source terms, the species equations give rise to a block-diagonal system which can be solved very efficiently on vector-processing computers. A supersonic reacting flow in an inlet-combustor configuration is calculated for the case where H2 is injected into the flow from the side walls and the strut. Results of the calculation are compared against the results obtained by using a complete reaction model.
A three-dimensional Reynolds-averaged Navier-Stokes code has been used to numerically analyze flow through a two-strut, supersonic combustion ramjet (scramjet) inlet configuration. It solves the governing equations in full conservation form using either the fully explicit or explicit-implicit method due to MacCormack. An algebraic two-layer eddy viscosity model is used for turbulent flow calculations. The analysis allows inclusion of end effects which are caused by the aft placement of the cowl on the underside of the inlet. A special grid has been developed to accommodate the struts embedded in the inlet flow field. Detailed numerical results are presented here for the two-strut configuration, and a comparison is made with the available experimental results.
A stable global-iteration procedure is applied to a fully implicit noniterative parabolized Navier-Stokes algorithm to improve the solutions of the single-sweep method as well as to resolve small separation bubbles due to shock-wave/boundary-layer interactions. A modified form of the FLARE approximation is employed in the separated regions and some requirements for stable iterations are discussed. The results of the global-iteration scheme for two test cases of supersonic internal flows are compared against the results of the single-sweep method as well as the results of the full Navier-Stokes solver.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Two-dimensional Euler and Navier-Stokes solutions of the flow through three inlet/diffuser configurations with terminal shock systems are reported. Calculations without bleed indicate that the terminal shock location is very sensitive to the outflow back pressure. For cases where there are no available experimental results, it becomes difficult to estimate the back pressure that will result in a terminal shock. Estimates based on quasi-one-dimensional analysis are not found adequate for complex two-dimensional flows. It is found that since the flow downstream of the terminal shock is subsonic, and what happens at the outflow boundary affects the flow inside the inlet, enough of the subsonic diffuser must be modeled to accurately predict the terminal shock region. The diffuser portion should be fairly long with the outflow boundary occurring in a region of more or less uniform flow to be able to prescribe a uniform back pressure. The third configuration studied was investigated with and without incorporating bleed in the code. It is found that the use of bleed stabilizes the shock location and allows solutions which without bleed result in unstarting of the inlet. Comparisons are made with available experimental data.
A wind tunnel experiment was performed to study the characteristics of supersonic airflow (M(infinity) = 2.5-3.86) through an open channel with a contoured floor. The measured static pressures along the centerline of the channel floor exhibited an unexpected rise at the end of the channel. Complex three-dimensional interactions of compression and expansion waves within the channel coupled with external flow perturbations caused by model/tunnel wall interference were the suspected sources of this flow behavior. Three-dimensional inviscid flow analysis procedures were used to investigate and explain this phenomenon. The results of the computations and the experiment are presented and discussed.
A computer program NASCRIN has been developed for analyzing two-dimensional flow fields in high-speed inlets. It solves the two-dimensional Euler or Navier-Stokes equations in conservation form by an explicit, two-step finite-difference method. An explicit-implicit method can also be used at the user's discretion for viscous flow calculations. For turbulent flow, an algebraic, two-layer eddy-viscosity model is used. The code is operational on the CDC CYBER 203 computer system and is highly vectorized to take full advantage of the vector-processing capability of the system. It is highly user oriented and is structured in such a way that for most supersonic flow problems, the user has to make only a few changes. Although the code is primarily written for supersonic internal flow, it can be used with suitable changes in the boundary conditions for a variety of other problems.