Search NASA⌕ Search

Engineering topics

Laboure, Vincent M

Publications and source records attributed to Laboure, Vincent M.

26 records · Page 2

Modeling Nuclear Thermal Propulsion Startup Transients

A poster for the 2021 intern poster session. This poster details the RELAP-7/Griffin model developed for transient simulations to compare the effects of startup sequencing on the propellant efficiency, startup time, and maximum core temperature of a nuclear thermal propulsion (NTP) system. The sequencing parameters under consideration in this study are the ramping rates of both reactivity insertion and hydrogen propellant mass flow rate. Recommendations are made regarding startup sequencing based on the results produced by this model.

33 ADVANCED PROPULSION SYSTEMS↗

Impact of Grain Size on Performance Degradation of TREAT LEU

We argue that radiation damage induced degradation of thermal conductivity does not set a lower limit on fuel grain sizes for the low enriched uranium fuel design of the Transient Reactor Test Facility (TREAT). Earlier work reports that smaller grains cause a larger degradation of thermal conductivity than larger grains constraining the smallest feasible size of fuel grains. This work assesses TREAT’s transient performance in the presence of radiation damage. The difference between the two studies is in treating damaged and fresh graphite as serial (this work) or parallel (previous) heat resistors. We use a multiphysics model of TREAT fuel grains to compute the reduction in transient capability measured by the total deposited energy as a function of irradiation dose. We find that radiation damage has a negligible effect on energy deposition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improvements to the Modeling of the TREAT Reactor and Experiments

This paper summarizes the latest improvements and lessons learned from the modeling and simulation of the transient test reactor at Idaho National Laboratory using the MAM- MOTH reactor physics application. MAMMOTH is a MOOSE-based, Finite Element Method application that specializes in the analysis of the spatial dynamics behavior of nuclear reactors. Since early 2018 several transient tests have been conducted at TREAT, thus providing the opportunity to apply and benchmark modern modeling and simulation tools. MAMMOTH was used to provide predictions of the power coupling factor between the core and the experiment for various experiments. Even though the power coupling factor predictions agree very well with the experimental data, within the bounds of the experimental uncertainty, one shortcoming was the underprediction of the total energy deposited in the core and in the experiment. Determination of the sources for this discrepancy are ongoing, but several key problems have been identified and resolved, thus providing valuable insights for future research. This paper discusses several of these lessons learned. First, the heat capacity data for the TREAT fuel has some significant problems due to limitations of the measurement techniques used circa 1960s. The sensitivity of the peak power and the total energy deposition to various representations of the heat capacity is approximately 5%. Second, the effects of the biological shield and thermal column on the modeling of the core are non-negligible, since they affect the mean generation time and the effective reflection of neutrons back into the core, which is suspected to be important during the core heat up. Matching the reactor period resolves the fact that the reduced spatial domain used in the MAMMOTH model underpredicts the mean generation time. The neutron reflection from these regions is marginally improved with the use of an albedo boundary condition. Third, modeling of the control rod movement with a multi-scheme method is introduced and its current limitations are exposed. Fourth, we explore the effects of using a homogenized model with Superhomogenization equivalence and how that differs from fully heterogeneous simulations. Finally, the energy condensation effects for this graphite core are significant. Solutions with 10 and 26 energy groups show the benefits of using a finer coarse group structure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MULTIPHYSICS STEADY-STATE SIMULATION OF THE HIGH TEMPERATURE TEST REACTOR WITH MAMMOTH, BISON AND RELAP-7

In this work we present a new approach to solving a multiphysics steady-state simulation for the High Temperature Test Reactor (HTTR) using one Super Homogenization (SPH) corrected homogenized 3-D neutronics model in MAMMOTH, multiple heterogeneous 2-D axisymmetric fuel pin models in BISON and several 1-D annular flow thermohydraulics models in RELAP-7. The coupling of the different physics is complicated by the fundamentally disparate models, potentially affecting the stability of the global system. A pseudo-transient to converge the temperature fields is used to circumvent this difficulty. The benefit of doing so as opposed to having fully 3-D heterogenous models for all physics is that the computational burden for reactors as complex as HTTR may quickly become unbearable while coarse models may not capture all the essential phenomena of the problem. The driving purpose of this work is to establish a self-sustaining steady-state solution that can be used to start safety transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MULTIPHYSICS STEADY-STATE SIMULATION OF THE HIGH TEMPERATURE TEST REACTOR WITH MAMMOTH, BISON AND RELAP-7

In this work we present a new approach to solving a multiphysics steady-state simulation for the High Temperature Test Reactor (HTTR) using one Super Homogenization (SPH) corrected homogenized 3-D neutronics model in MAMMOTH, multiple heterogeneous 2-D axisymmetric fuel pin models in BISON and several 1-D annular flow thermohydraulics models in RELAP-7. The coupling of the different physics is complicated by the fundamentally disparate models, potentially affecting the stability of the global system. A pseudo-transient to converge the temperature fields is used to circumvent this difficulty. The benefit of doing so as opposed to having fully 3-D heterogenous models for all physics is that the computational burden for reactors as complex as HTTR may quickly become unbearable while coarse models may not capture all the essential phenomena of the problem. The driving purpose of this work is to establish a self-sustaining steady-state solution that can be used to start safety transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MULTIPHYSICS STEADY-STATE SIMULATION OF THE HIGH TEMPERATURE TEST REACTOR WITH MAMMOTH, BISON AND RELAP-7

In this work we present a new approach to solving a multiphysics steady-state simulation for the High Temperature Test Reactor (HTTR) using one Super Homogenization (SPH) corrected homogenized 3-D neutronics model in MAMMOTH, multiple heterogeneous 2-D axisymmetric fuel pin models in BISON and several 1-D annular flow thermohydraulics models in RELAP-7. The coupling of the different physics is complicated by the fundamentally disparate models, potentially affecting the stability of the global system. A pseudo-transient to converge the temperature fields is used to circumvent this difficulty. The benefit of doing so as opposed to having fully 3-D heterogenous models for all physics is that the computational burden for reactors as complex as HTTR may quickly become unbearable while coarse models may not capture all the essential phenomena of the problem. The driving purpose of this work is to establish a self-sustaining steady-state solution that can be used to start safety transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗