Search NASA⌕ Search

Engineering topics

Lakshmi, N

Publications and source records attributed to Lakshmi, N.

Inter particle interaction in Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} prepared by self combustion method

Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} has been prepared by self combustion method and studied using X-ray diffraction, Moessbauer spectroscopy and DC magnetization techniques. X-ray diffractogram shows highly crystalline nano sized sample with no impurity phases. The room temperature Moessbauer and magnetization measurements show the co-existence of superparamagnetic and ferrimagnetic particles in the sample. The presence of inter particle interaction is confirmed from the {delta}M(H) curve at 20K. The dependence of magnetic moment below blocking temperature in the field cooling curve indicates that the inter particle interaction is weak in the as prepared sample.

36 MATERIALS SCIENCE↗

MOKE Study of Fe/Co/Al Multilayers

The multilayer system (MLS)-[{sup 57}Fe{sub 25}A/Co{sub 11}A/Al{sub 17}A]x20 has been deposited by Ion beam sputtering (IBS) technique. The MLS has been annealed at 700 deg. C for 1 h. Overall composition of as deposited and annealed MLS have been characterized by EDX and magnetic properties have been studied through angular dependent magneto optic Kerr effect (MOKE) hysteresis curves. The study shows that the as-deposited MLS has excellent soft magnetic properties coupled with perpendicular magnetic isotropy which is destroyed on annealing.

36 MATERIALS SCIENCE↗

TEM and Moessbauer Study of Nano Sized Fe{sub 2}MnAl Flakes

Magnetic and structural properties of L21 ordered Fe{sub 2}MnAl Heusler alloy have been studied by X-ray diffraction, Transmission electron microscopy (TEM), Moessbauer spectroscopy and DC magnetization. Structural texturing induced by ball milling is destroyed on heating while Moessbauer and DC magnetization studies show magnetic texturing persists after thermal treatment. TEM shows large distribution in particle size with an average size of 27 nm. Thermal annealing of ball milled sample results L2{sub 1} ordering and the needle shaped particle contributes spin texturing.

36 MATERIALS SCIENCE↗

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase evolution in {sup 57}Fe/Al multilayers studied through dc magnetization, conversion electron Moessbauer spectroscopy, and transmission electron microscopy

Fe/Al multilayer thin films with an overall atomic concentration ratio of Fe:Al=1:2 have been prepared by ion-beam sputtering. Phase formation and microstructural evolution with thermal annealing have been studied by x-ray reflectivity, cross-sectional transmission electron microscopy, dc magnetization, and conversion electron Moessbauer spectroscopy. These studies show that although the starting composition is Al rich, the intermixing of Fe and Al at the interfaces leads to the formation of a magnetic Fe{sub 3}Al-like region at the interface. Thus, the magnetic contribution in the as-deposited multilayer structure (MLS) is not only from pure Fe but also from an Fe{sub 3}Al-like region formed at the interface. On annealing the MLS, a stable nonmagnetic MLS consisting of intermetallic B2Fe{sub 50}Al{sub 50} separated by thin Al layers is formed. Further annealing only induces better ordering of Fe{sub 50}Al{sub 50} and does not destroy the MLS.

36 MATERIALS SCIENCE↗