Search NASA⌕ Search

DOE OSTI · 21180054

Phase evolution in {sup 57}Fe/Al multilayers studied through dc magnetization, conversion electron Moessbauer spectroscopy, and transmission electron microscopy

Abstract

Fe/Al multilayer thin films with an overall atomic concentration ratio of Fe:Al=1:2 have been prepared by ion-beam sputtering. Phase formation and microstructural evolution with thermal annealing have been studied by x-ray reflectivity, cross-sectional transmission electron microscopy, dc magnetization, and conversion electron Moessbauer spectroscopy. These studies show that although the starting composition is Al rich, the intermixing of Fe and Al at the interfaces leads to the formation of a magnetic Fe{sub 3}Al-like region at the interface. Thus, the magnetic contribution in the as-deposited multilayer structure (MLS) is not only from pure Fe but also from an Fe{sub 3}Al-like region formed at the interface. On annealing the MLS, a stable nonmagnetic MLS consisting of intermetallic B2Fe{sub 50}Al{sub 50} separated by thin Al layers is formed. Further annealing only induces better ordering of Fe{sub 50}Al{sub 50} and does not destroy the MLS.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jani, Snehal, Lakshmi, N, Venugopalan, K, Sebastian, Varkey, Reddy, V R, Gupta, Ajay, Lalla, N P. 2008-12-15. Phase evolution in {sup 57}Fe/Al multilayers studied through dc magnetization, conversion electron Moessbauer spectroscopy, and transmission electron microscopy. https://doi.org/10.1063/1.3050336

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗