Search NASA⌕ Search

Engineering topics

Lei, Yu

Publications and source records attributed to Lei, Yu.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Ammonia gas sensors: A comprehensive review

We report that in recent years, sensitive, selective and accurate sensing techniques for ammonia gas detection have been highly demanded since ammonia is both a commonly utilized gas in various industrial sectors and a highly toxic and corrosive agent that can threat human health and environment. This review article discusses the widely used gas sensing techniques in ammonia detection. The fundamental working principles of the ammonia detection techniques relying on electronics, electrochemistry, tunable diode laser spectroscopy, surface acoustic wave, and field effect transistors are briefly described first, in conjunction with various sensing materials. Furthermore, recent progress in the development of advanced ammonia gas sensors was comprehensively reviewed and summarized. Finally, the outlook for future development of high-performance ammonia sensors was presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Carbon doping of WS 2 monolayers: Bandgap reduction and p-type doping transport

Chemical doping constitutes an effective route to alter the electronic, chemical, and optical properties of two-dimensional transition metal dichalcogenides (2D-TMDs). We used a plasma-assisted method to introduce carbon-hydrogen (CH) units into WS 2 monolayers. We found CH-groups to be the most stable dopant to introduce carbon into WS 2 , which led to a reduction of the optical bandgap from 1.98 to 1.83 eV, as revealed by photoluminescence spectroscopy. Aberration corrected high-resolution scanning transmission electron microscopy (AC-HRSTEM) observations in conjunction with first-principle calculations confirm that CH-groups incorporate into S vacancies within WS 2 . According to our electronic transport measurements, undoped WS 2 exhibits a unipolar n-type conduction. Nevertheless, the CH-WS 2 monolayers show the emergence of a p-branch and gradually become entirely p-type, as the carbon doping level increases. Therefore, CH-groups embedded into the WS 2 lattice tailor its electronic and optical characteristics. This route could be used to dope other 2D-TMDs for more efficient electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High temperature sensor for reducing gas

The present disclosure provides improved sensor assemblies for gases. More particularly, the present disclosure provides for gas sensor assemblies operating at high temperature. Improved high temperature sensor assemblies for reducing gas are provided. In some embodiments, the present disclosure provides advantageous impedancemetric high temperature gas sensor assemblies based on electrospun nanofibers and having selectivity towards reducing gas, and related methods of use. In exemplary embodiments, the present disclosure provides for impedancemetric high temperature gas sensor assemblies having selectivity towards reducing gas. In certain embodiments, the sensor assembly includes electrospun nanofibers. Impedancemetric techniques have been employed at high operating frequency (e.g., 105 Hz) for the first time to provide real-time assemblies, methods and devices to sensitively and/or selectively detect reducing gas (e.g., CO, C3H8 (propane), etc.) at high temperatures (e.g., at about 800° C.).

Lei, Yu↗
DOE OSTI2018

Mesopore differences between pillared lamellar MFI and MWW zeolites probed by atomic layer deposition of titania and consequences on photocatalysis

The pillared MWW (PMWW or MCM-36) and pillared MFI (PMFI) are two prominent representatives of meso-/microporous lamellar zeolites, which are made by pillaring of layered MCM-22(P) and multilamellar MFI precursors, respectively. They both consist of a 10-membered ring sinusoidal micropore channel within each zeolitic layer and mesopore voids created by pillars between two adjacent zeolitic layers. Although catalytic activities of PMWW and PMFI have been compared, identification of mesopore differences between these two pillared lamellar zeolites has not been attempted. In this work, we report the differences in mesopore characteristics between PMWW and PMFI zeolites probed by atomic layer deposition (ALD) of titania (ALD-TiO2) species and a combination of structural, textural, composition and catalytic property analyses of the samples before and after ALD treatment, respectively. The results suggest PMFI has cylindrical mesopores with uniform sizes from pore entrance to main body, while PMWW has ink-bottle mesopores with the neck size much smaller than pore body. The communication between micropore and mesopore in PMFI is direct, but no communication exists in PMWW zeolites. Here, the ALD-TiO 2 process considerably modified external surface composition of PMFI and PMWW zeolites, which consequently led to a new application of the pillared lamellar zeolite materials, i.e., photo-catalytically active meso-/microporous zeolites for environmental remedy reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Sensitive and Selective NH3 Monitoring at Room Temperature Using ZnO Ceramic Nanofibers Decorated with Poly(styrene sulfonate)

Ammonia (NH3) gas is a prominent air pollutant that is frequently found in industrial and livestock production environments. Due to the importance in controlling pollution and protecting public health, the development of new platforms for sensing NH3 at room temperature has attracted great attention. In this study, a sensitive NH3 gas device with enhanced selectivity is developed based on zinc oxide nanofibers (ZnO NFs) decorated with poly(styrene sulfonate) (PSS) and operated at room temperature. ZnO NFs were prepared by electrospinning followed by calcination at 500 °C for 3 h. The electrospun ZnO NFs are characterized to evaluate the properties of the as-prepared sensing materials. The loading of PSS to prepare ZnO NFs/PSS composite is also optimized based on the best sensing performance. Under the optimal composition, ZnO NFs/PSS displays rapid, reversible, and sensitive response upon NH3 exposure at room temperature. The device shows a dynamic linear range up to 100 ppm and a limit of detection of 3.22 ppm and enhanced selectivity toward NH3 in synthetic air, against NO2 and CO, compared to pure ZnO NFs. Additionally, a sensing mechanism is proposed to illustrate the sensing performance using ZnO NFs/PSS composite. Therefore, this study provides a simple methodology to design a sensitive platform for NH3 monitoring at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Atomic layer deposition of molybdenum disulfide films using MoF 6 and H 2 S

Molybdenum sulfide films were grown by atomic layer deposition on silicon and fused silica substrates using molybdenum hexafluoride (MoF6) and hydrogen sulfide at 200 degrees C. In situ quartz crystal microbalance (QCM) measurements confirmed linear growth at 0.46 angstrom/cycle and self-limiting chemistry for both precursors. Analysis of the QCM step shapes indicated that MoS2 is the reaction product, and this finding is supported by x-ray photoelectron spectroscopy measurements showing that Mo is predominantly in the Mo(IV) state. However, Raman spectroscopy and x-ray diffraction measurements failed to identify crystalline MoS2 in the as-deposited films, and this might result from unreacted MoFx residues in the films. Annealing the films at 350 degrees C in a hydrogen rich environment yielded crystalline MoS2 and reduced the F concentration in the films. Optical transmission measurements yielded a bandgap of 1.3 eV. Finally, the authors observed that the MoS2 growth per cycle was accelerated when a fraction of the MoF6 pulses were substituted with diethyl zinc. Published by the AVS

Mane, Anil U.↗
DOE OSTI2017

High-Capacity Sodium Peroxide Based Na–O 2 Batteries with Low Charge Overpotential via a Nanostructured Catalytic Cathode

The superoxide based Na-O 2 battery has circumvented the issue of large charge overpotential in Li-O-2 batteries; however, the one-electron process leads to limited capacity. Here in this paper, a sodium peroxide based low-overpotential (similar to 0.5 V) Na-O 2 battery with a capacity as high as 7.5 mAh/cm 2 is developed with Pd nanoparticles as catalysts on the cathode.

25 ENERGY STORAGE↗
DOE OSTI2017

Tailoring nanopore formation in atomic layer deposited ultrathin films [Nanopore formation in atomic layer deposited ultrathin films]

Selectivity is a critical attribute of catalysts used in manufacturing of essential and fine chemicals. An excellent way to induce selectivity in catalysts is by using ultrathin films with tailored nanoporosity. For instance, nanopores can be created in atomic layer deposition (ALD) ultrathin over-coatings on supported metal nanoparticles by subjecting the coatings to high temperature annealing. These nanopores expose the active surface of the underlying metal nanoparticles. The dimensions of these nanopores can be tuned to impart shape selectivity: only reactants or products with a specific size or shape can fit inside the pore. In this work, the authors explore the underlying mechanism driving nanopore formation in ALD films. Ultrathin films of ALD TiO 2 (similar to 2.5 nm thick) and ALD Al 2 O 3 (similar to 4.9 nm thick) were deposited on nonporous gamma-Al 2 O 3 nanoparticles. The pore formation and evolution were monitored in situ during thermal annealing using small-angle x-ray scattering (SAXS), and the crystallinity was monitored by in situ x-ray diffraction. A correlation between the nanopore formation and amorphous to crystalline phase transitions in the ALD layers was observed. The authors hypothesize that the pores form through the relaxation of stress induced by densification of the ALD films during the phase transitions. In conclusion, the authors developed a mathematical model to evaluate this hypothesis and found remarkable agreement between the model and the SAXS measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Automatic planning on hippocampal avoidance whole-brain radiotherapy

Mounting evidence suggests that radiation-induced damage to the hippocampus plays a role in neurocognitive decline for patients receiving whole-brain radiotherapy (WBRT). Hippocampal avoidance whole-brain radiotherapy (HA-WBRT) has been proposed to reduce the putative neurocognitive deficits by limiting the dose to the hippocampus. However, urgency of palliation for patients as well as the complexities of the treatment planning may be barriers to protocol enrollment to accumulate further clinical evidence. This warrants expedited quality planning of HA-WBRT. Pinnacle{sup 3} Automatic treatment planning was designed to increase planning efficiency while maintaining or improving plan quality and consistency. The aim of the present study is to evaluate the performance of the Pinnacle{sup 3} Auto-Planning on HA-WBRT treatment planning. Ten patients previously treated for brain metastases were selected. Hippocampal volumes were contoured on T1 magnetic resonance (MR) images, and planning target volumes (PTVs) were generated based on RTOG0933. The following 2 types of plans were generated by Pinnacle{sup 3} Auto-Planning: the one with 2 coplanar volumetric modulated arc therapy (VMAT) arcs and the other with 9-field noncoplanar intensity-modulated radiation therapy (IMRT). D{sub 2%} and D{sub 98%} of PTV were used to calculate homogeneity index (HI). HI and Paddick Conformity index (CI) of PTV as well as D{sub 100%} and D{sub max} of the hippocampus were used to evaluate the plan quality. All the auto-plans met the dose coverage and constraint objectives based on RTOG0933. The auto-plans eliminated the necessity of generating pseudostructures by the planners, and it required little manual intervention which expedited the planning process. IMRT quality assurance (QA) results also suggest that all the auto-plans are practically acceptable on delivery. Pinnacle{sup 3} Auto-Planning generates acceptable plans by RTOG0933 criteria without time-consuming planning process. The expedited quality planning achieved by Auto-Planning (AP) may facilitate protocol enrollment of patients to further investigate the hippocampal-sparing effect and be used to ensure timely start of palliative treatment in future clinical practice.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2017

Dendrite-Free Potassium–Oxygen Battery Based on a Liquid Alloy Anode

The safety issue caused by the dendrite growth is not only a key research problem in lithium-ion batteries but also a critical concern in alkali metal (i.e., Li, Na, and K) oxygen batteries where a solid metal is usually used as the anode. Herein, we demonstrate the first dendrite-free K-O-2 battery at ambient temperature based on a liquid Na K alloy anode. The unique liquid liquid connection between the liquid alloy and the electrolyte in our alloy anode-based battery provides a homogeneous and robust anode electrolyte interface. Meanwhile, we manage to show that the Na K alloy is only compatible in K-O-2 batteries but not in Na-O-2 batteries, which is mainly attributed to the stronger reducibility of potassium and relatively more favorable thermodynamic formation of KO, over NaO2 during the discharge process. It is observed that our K-O-2 battery based on a liquid alloy anode shows a long cycle life (over 620 h) and a low discharge charge overpotential (about 0.05 V at initial cycles). Moreover, the mechanism investigation into the K-O-2 cell degradation shows that the 02 crossover effect and the ether electrolyte instability are the critical problems for K-O-2 batteries. In a word, this study provides a new route to solve the problems caused by the dendrite growth in alkali metal oxygen batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Atomic Layer Deposition for Lithium-Based Batteries

With the increasing demand for energy at a low cost and minimal environmental impact, the development of next-generation high-performance batteries has drawn considerable attention. Owing to the capability of forming conformal coatings of thin films and nanoparticles, atomic layer deposition (ALD) has shown great potential in deposition and surface modification of electrode materials with various nanostructures, deposition of solid-state electrolyte, and fabrication of electrochemical catalysts. This paper reviews the recent development and applications of ALD in Li-based batteries, especially beyond Li-ion systems, and provides suggestions for further development of ALD techniques for these batteries.

25 ENERGY STORAGE↗