Search NASA⌕ Search

Engineering topics

Li, J

Publications and source records attributed to Li, J.

At least 127 records · Page 7

Covariant Density Functional Theory--highlights on recent progress and applications

The density functional theory with a few number of parameters allows a very successful phenomenological description of ground state properties of nuclei all over the nuclear chart. The recent progress on the application of the covariant density functional theory (CDFT) for nuclear structure and astrophysics as well as its extensions by the group in Beijing is summarized. In particular, its application to magnetic moments is discussed in details.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observation of B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(980) and Evidence for B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(1370)

We report the observation of B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(980) and evidence for B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(1370), which are CP eigenstate decay modes. These results are obtained from 121.4 fb{sup -1} of data collected at the {Upsilon}(5S) resonance with the Belle detector at the KEKB e{sup +}e{sup -} collider. We measure the branching fractions B(B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(980);f{sub 0}(980){yields}{pi}{sup +}{pi}{sup -})=(1.16{sub -0.19}{sup +0.31}(stat){sub -0.17}{sup +0.15} (syst){sub -0.18}{sup +0.26}(N{sub B{sub s}{sup (*)}}{sub B{sub s}{sup (*)}}))x10{sup -4} with a significance of 8.4{sigma}, and B(B{sub s}{sup 0}{yields}J/{psi}f{sub 0}(1370);f{sub 0}(1370){yields}{pi}{sup +}{pi}{sup -})=(0.34{sub -0.14}{sup +0.11}(stat){sub -0.02}{sup +0.03} (syst){sub -0.05}{sup +0.08} (N{sub B{sub s}{sup (*)}}{sub B{sub s}{sup (*)}}))x10{sup -4} with a significance of 4.2{sigma}. The last error listed is due to uncertainty in the number of produced B{sub s}{sup (*)}B{sub s}{sup (*)} pairs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Catalytic synthesis of bamboo-like multiwall BN nanotubes via SHS-annealing process

Bamboo-like multiwall boron nitride (BN) nanotubes were synthesized via annealing porous precursor prepared by self-propagation high temperature synthesis (SHS) method. The as-synthesized BN nanotubes were characterized by the field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), high-resolution TEM (HRTEM), X-ray diffraction (XRD), Raman and Fourier transform infrared (FTIR) spectroscopy. These nanotubes have uniform diameters of about 60 nm and an average length of about 10 {mu}m. Four growth models, including tip, base, based tip and base-tip growth models, are proposed based on the catalytic vapor-liquid-solid (VLS) growth mechanism for explaining the formation of the as-synthesized bamboo-like BN nanotubes. Chemical reactions and annealing mechanism are also discussed. -- Graphical Abstract: A novel and effective annealing porous precursor route to bulk synthesis of bamboo-like multiwall BN nanotubes. Four growth models of VLS growth mechanism for these nanotubes are proposed. Display Omitted Research highlights: {yields} Bulk bamboo-like BN nanotubes were synthesized by SHS-annealing method. {yields} Boron-containing, porous precursor played a crucial role in bulk synthesis process. {yields} Four possible growth models were proposed to explain the formation of the bamboo-like BN nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Continuous spin reorientation transition in epitaxially grown antiferromagnetic NiO thin films

Fe/NiO/MgO/Ag(001) films were grown epitaxially, and the Fe and NiO spin orientations were determined using x-ray magnetic dichroism. We find that the NiO spins are aligned perpendicularly to the in-plane Fe spins. Analyzing both the in-plane and out-of-plane spin components of the NiO layer, we demonstrate unambiguously that the antiferromagnetic NiO spins undergo a continuous spin reorientation transition from the in-plane to out-of-plane directions with increasing of the MgO thickness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of platinum stagnation surface on the lean extinction limits of premixed methane/air flames at moderate surface temperatures

A stagnation flow reactor was used to study the effects of platinum on the lean flammability limits of atmospheric pressure premixed methane/air flames at moderate stagnation surface temperatures. Experimental and computational methods were used to quantify the equivalence ratio at the lean extinction limit ({phi}{sub ext}) and the corresponding stagnation surface temperature (T{sub s}). A range of flow rates (57-90 cm/s) and corresponding strain rates were considered. The results indicate that the gas-phase methane/air flames are sufficiently strong relative to the heterogeneous chemistry for T{sub s} conditions less than 750 K that the platinum does not affect {phi}{sub ext}. The computational results are in good agreement with the experimentally observed trends and further indicate that higher reactant flow rates (>139 cm/s) and levels of dilution (>{proportional_to}10% N{sub 2}) are required to weaken the gas-phase flame sufficiently for surface reaction to play a positive role on extending the lean flammability limits. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Element-specific study of epitaxial NiO/Ag/CoO/Fe films grown on vicinal Ag(001) using photoemission electron microscopy

NiO/Ag/CoO/Fe single crystalline films are grown epitaxially on a vicinal Ag(001) substrate using molecular beam epitaxy and investigated by photoemission electron microscopy. We find that after zero-field cooling, the in-plane Fe magnetization switches from parallel to perpendicular direction of the atomic steps of the vicinal surface at thinner CoO thickness but remains in its original direction parallel to the steps at thicker CoO thickness. CoO and NiO domain imaging result shows that both CoO/Fe and NiO/CoO spins are perpendicularly coupled, suggesting that the Fe magnetization switching may be associated with the rotatable-frozen spin transition of the CoO film.

36 MATERIALS SCIENCE↗

Improved Energy Conversion Efficiency in Wide Bandgap Cu(In,Ga)Se2 Solar Cells

This report outlines improvements to the energy conversion efficiency in wide bandgap (E{sub g} > ;1.2 eV) solar cells based on CuIn{sub 1-x}Ga{sub x}Se{sub 2}. Using (a) alkaline containing high temperature glass substrates, (b) elevated substrate temperatures 600 C-650 C and (c) high vacuum evaporation from elemental sources following NREL's three-stage process, we have been able to improve the performance of wider bandgap solar cells with 1.2 < E{sub g} < 1.45 eV. Initial results of this work have led to efficiencies >18% for absorber bandgaps {approx}1.30 eV and efficiencies {approx}16% for bandgaps up to {approx}1.45 eV. In comparing J-V parameters in similar materials, we establish gains in the open-circuit voltage and, to a lesser degree, the fill factor value, as the reason for the improved performance. The higher voltages seen in these wide gap materials grown at high substrate temperatures may be due to reduced recombination at the grain boundary of such absorber films. Solar cell results, absorber materials characterization, and experimental details are reported.

14 SOLAR ENERGY↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure p{sub Ar}, was varied in the range of 6-20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions {var_epsilon} of the Mo films were strongly dependent on p{sub Ar}, indicating a consistent and significant decrease in the Mo film density {rho}{sub Mo} with increasing p{sub Ar}. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. {var_epsilon} of Mo was then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(In{sub x}Ga{sub 1-x})Se{sub 2} (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for process monitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using {var_epsilon} deduced from SE.

14 SOLAR ENERGY↗

Different Factors Affecting Short Circuit Behavior of a Wind Power Plant

A wind power plant consists of a large number of turbines interconnected by underground cable. A pad-mount transformer at each turbine steps up the voltage from generating voltage (690 V) to a medium voltage (34.5 kV). All turbines in the plant are connected to the substation transformer where the voltage is stepped up to the transmission level. An important aspect of wind power plant (WPP) impact studies is to evaluate the short-circuit (SC) current contribution of the plant into the transmission network under different fault conditions. This task can be challenging to protection engineers due to the topology differences between different types of wind turbine generators (WTGs) and the conventional generating units. This paper investigates the short circuit behavior of a wind power plant for different types of faults. The impact of wind turbine types, the transformer configuration, and the reactive compensation capacitor will be investigated. The voltage response at different buses will be observed. Finally, the SC line currents will be presented along with its symmetrical components.

17 WIND ENERGY↗

CIRCULATION AND DISSIPATION ON HOT JUPITERS

Many global circulation models predict supersonic zonal winds and large vertical shears in the atmospheres of short-period Jovian exoplanets. Using linear analysis and nonlinear local simulations, we investigate hydrodynamic dissipation mechanisms to balance the thermal acceleration of these winds. The adiabatic Richardson criterion remains a good guide to linear stability, although thermal diffusion allows some modes to violate it at very long wavelengths and very low growth rates. Nonlinearly, wind speeds saturate at Mach numbers {approx}2 and Richardson numbers {approx}<1/4 for a broad range of plausible diffusivities and forcing strengths. Turbulence and vertical mixing, though accompanied by weak shocks, dominate the dissipation, which appears to be the outcome of a recurrent Kelvin-Helmholtz instability. An explicit shear viscosity, as well as thermal diffusivity, is added to ZEUS to capture dissipation outside of shocks. The wind speed is neither monotonic nor single valued for a range of shear viscosities larger than about 10{sup -3} of the sound speed times the pressure scale height. Coarsening the numerical resolution can also increase the speed. Hence global simulations that are incapable of representing vertical turbulence and shocks, either because of reduced physics or because of limited resolution, may overestimate wind speeds. We recommend that such simulations include artificial dissipation terms to control the Mach and Richardson numbers and to capture mechanical dissipation as heat.

79 ASTRONOMY AND ASTROPHYSICS↗

U.S. Department of Energy Critical Materials Strategy

This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DOE) based on data collected and research performed during 2010. Its main conclusions include: (a) Several clean energy technologies -- including wind turbines, electric vehicles, photovoltaic cells and fluorescent lighting -- use materials at risk of supply disruptions in the short term. Those risks will generally decrease in the medium and long term. (b) Clean energy technologies currently constitute about 20 percent of global consumption of critical materials. As clean energy technologies are deployed more widely in the decades ahead, their share of global consumption of critical materials will likely grow. (c) Of the materials analyzed, five rare earth metals (dysprosium, neodymium, terbium, europium and yttrium), as well as indium, are assessed as most critical in the short term. For this purpose, 'criticality' is a measure that combines importance to the clean energy economy and risk of supply disruption. (d) Sound policies and strategic investments can reduce the risk of supply disruptions, especially in the medium and long term. (e) Data with respect to many of the issues considered in this report are sparse. In the report, DOE describes plans to (i) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the Department during November and December 2010; (ii) strengthen its capacity for information-gathering on this topic; and (iii) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. DOE will work with other stakeholders -- including interagency colleagues, Congress and the public -- to shape policy tools that strengthen the United States' strategic capabilities. DOE also announces its plan to develop an updated critical materials strategy, based upon additional events and information, by the end of 2011.DOE's strategy with respect to critical materials rests on three pillars. First, diversified global supply chains are essential. To manage supply risk, multiple sources of materials are required. This means taking steps to facilitate extraction, processing and manufacturing here in the United States, as well as encouraging other nations to expedite alternative supplies. In all cases, extraction and processing should be done in an environmentally sound manner. Second, substitutes must be developed. Research leading to material and technology substitutes will improve flexibility and help meet the material needs of the clean energy economy. Third, recycling, reuse and more efficient use could significantly lower world demand for newly extracted materials. Research into recycling processes coupled with well-designed policies will help make recycling economically viable over time.The scope of this report is limited. It does not address the material needs of the entire economy, the entire energy sector or even all clean energy technologies. Time and resource limitations precluded a comprehensive scope. Among the topics that merit additional research are the use of rare earth metals in catalytic converters and in petroleum refining. These topics are discussed briefly in Chapter 2.

36 MATERIALS SCIENCE↗

Electronic spin state of iron in lower mantle perovskite

The electronic spin state of iron in lower mantle perovskite is one of the fundamental parameters that governs the physics and chemistry of the most voluminous and massive shell in the Earth. We present experimental evidence for spin-pairing transition in aluminum-bearing silicate perovskite (Mg,Fe)(Si,Al)O{sub 3} under the lower mantle pressures. Our results demonstrate that as pressure increases, iron in perovskite transforms gradually from the initial high-spin state toward the final low-spin state. At 100 GPa, both aluminum-free and aluminum-bearing samples exhibit a mixed spin state. The residual magnetic moment in the aluminum-bearing perovskite is significantly higher than that in its aluminum-free counterpart. The observed spin evolution with pressure can be explained by the presence of multiple iron species and the occurrence of partial spin-paring transitions in the perovskite. Pressure-induced spin-pairing transitions in the perovskite would have important bearing on the magnetic, thermoelastic, and transport properties of the lower mantle, and on the distribution of iron in the Earth's interior. The lower mantle constitutes more than half of the Earth's interior by volume (1), and it is believed to consist predominantly (80-100%) of (Mg,Fe)(Si,Al)O{sub 3} perovskite (hereafter called perovskite), with up to 20% (Mg,Fe)O ferropericlase (2). The electronic spin state of iron has direct influence on the physical properties and chemical behavior of its host phase. Hence, knowledge on the spin state of iron is important for the interpretation of seismic observations, geochemical modeling, and geodynamic simulation of the Earth's deep interior (3, 4). Crystal field theory (4, 5) and band theory (6) predicted that a high-spin to low-spin transition would occur as a result of compression. To date, no experimental data exist on the spin sate of iron in Al-bearing perovskite. To detect possible spinpairing transition of iron in perovskite under the lower mantle conditions, we measured the x-ray emission spectra of an Al-bearing perovskite sample to 100 GPa. For comparison, a parallel measurement was also carried out on an Al-free perovskite sample.

58 GEOSCIENCES↗

Optical Properties of the Iron-arsenic Superconductor BaFe1.85Co0.15As2

The transport and complex optical properties of the electron-doped iron-arsenic superconductor BaFe{sub 1.85}Co{sub 0.15}As{sub 2} with T{sub c} = 25 K have been examined in the Fe-As planes above and below T{sub c}. A Bloch-Grueneisen analysis of the resistivity yields a weak electron-phonon coupling constant {lambda}{sub ph} {approx_equal} 0.2. The low-frequency optical response in the normal state appears to be dominated by the electron pocket and may be described by a weakly interacting Fermi liquid with a Drude plasma frequency of {omega}{sub p,D} {approx_equal} 7840 cm{sup -1} ({approx_equal}0.972eV) and scattering rate 1/{tau}{sub D} {approx_equal} 126 cm{sup -1} ({approx_equal}15 meV) just above T{sub c}. The frequency-dependent scattering rate 1/{tau}({Omega}) has kinks at {approx_equal}12 and 55 meV that appear to be related to bosonic excitations. Below T{sub c} the majority of the superconducting plasma frequency originates from the electron pocket and is estimated to be {omega}{sub p,S} {approx_equal} 5200 cm{sup -1} ({lambda}{sub 0} {approx_equal} 3000 {angstrom}) for T << T{sub c}, indicating that less than half the free carriers in the normal state have collapsed into the condensate, suggesting that this material is not in the clean limit. Supporting this finding is the observation that this material falls close to the universal scaling line for a Bardeen, Cooper, and Schrieffer dirty-limit superconductor in the weak-coupling limit. There are two energy scales for the superconductivity in the optical conductivity and photoinduced reflectivity at {Delta}{sub 1}(0){approx_equal}3.1 {+-} 0.2 meV and {Delta}{sub 2}(0){approx_equal}7.4 {+-} 0.3 meV. This corresponds to either the gapping of the electron and hole pockets, respectively, or an anisotropic s-wave gap on the electron pocket; both views are consistent with the s{sup {+-}} model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First Measurement of Inclusive B{yields}X{sub s{eta}} Decays

We report a first measurement of inclusive B{yields}X{sub s{eta}} decays, where X{sub s} is a charmless state with unit strangeness. The measurement is based on a pseudoinclusive reconstruction technique and uses a sample of 657x10{sup 6}BB pairs accumulated with the Belle detector at the KEKB e{sup +}e{sup -} collider. For M{sub X{sub s}}<2.6 GeV/c{sup 2}, we measure a branching fraction of [26.1{+-}3.0(stat){sub -2.1}{sup +1.9}(syst){sub -7.1}{sup +4.0}(model)]x10{sup -5} and a direct CP asymmetry of A{sub CP}=-0.13{+-}0.04{sub -0.03}{sup +0.02}. Over half of the signal occurs in the range M{sub X{sub s}}>1.8 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tyrosine aminotransferase: biochemical and structural properties and molecular dynamics simulations

Tyrosine aminotransferase (TAT) catalyzes the transamination of tyrosine and other aromatic amino acids. The enzyme is thought to play a role in tyrosinemia type II, hepatitis and hepatic carcinoma recovery. The objective of this study is to investigate its biochemical and structural characteristics and substrate specificity in order to provide insight regarding its involvement in these diseases. Mouse TAT (mTAT) was cloned from a mouse cDNA library, and its recombinant protein was produced using Escherichia coli cells and purified using various chromatographic techniques. The recombinant mTAT is able to catalyze the transamination of tyrosine using {alpha}-ketoglutaric acid as an amino group acceptor at neutral pH. The enzyme also can use glutamate and phenylalanine as amino group donors and p-hydroxy-phenylpyruvate, phenylpyruvate and alpha-ketocaproic acid as amino group acceptors. Through macromolecular crystallography we have determined the mTAT crystal structure at 2.9 {angstrom} resolution. The crystal structure revealed the interaction between the pyridoxal-5'-phosphate cofactor and the enzyme, as well as the formation of a disulphide bond. The detection of disulphide bond provides some rational explanation regarding previously observed TAT inactivation under oxidative conditions and reactivation of the inactive TAT in the presence of a reducing agent. Molecular dynamics simulations using the crystal structures of Trypanosoma cruzi TAT and human TAT provided further insight regarding the substrate-enzyme interactions and substrate specificity. The biochemical and structural properties of TAT and the binding of its cofactor and the substrate may help in elucidation of the mechanism of TAT inhibition and activation.

59 BASIC BIOLOGICAL SCIENCES↗

Comparing frustrated and unfrustrated clusters of sinlge-domain ferromagnetic islands

We have studied the magnetic-moment configurations of different geometry clusters of single-domain nanoscale ferromagnetic islands. The clusters consisted of four islands arranged in geometries taken from the square lattice of artificial spin ice. The magnetic-moment configurations were imaged by magnetic force microscopy after effectively annealing through ac demagnetization. We then compared the results for cluster geometries with and without frustration of the magnetostatic interactions between the island moments. We found that nonfrustrated clusters achieve their lowest energy states more readily than do frustrated clusters. This behavior suggests the presence of a kinetic barrier associated with frustration of the magnetostatic interactions.

36 MATERIALS SCIENCE↗

Constraints on nonstandard neutrino interactions and unparticle physics with {nu}{sub e}-e{sup -} scattering at the Kuo-Sheng nuclear power reactor

Neutrino-electron scatterings are purely leptonic processes with robust standard model (SM) predictions. Their measurements can therefore provide constraints to physics beyond SM. The {nu}{sub e}-e data taken at the Kuo-Sheng Reactor Neutrino Laboratory were used to probe two scenarios: nonstandard neutrino interactions (NSI) and unparticle physics. New constraints were placed on the NSI parameters ({epsilon}{sub ee}{sup eL},{epsilon}{sub ee}{sup eR}), ({epsilon}{sub e{mu}}{sup eL},{epsilon}{sub e{mu}}{sup eR}), and ({epsilon}{sub e{tau}}{sup eL},{epsilon}{sub e{tau}}{sup eR}) for the nonuniversal and flavor-changing channels, respectively, as well as to the coupling constants for scalar ({lambda}{sub 0}) and vector ({lambda}{sub 1}) unparticles to the neutrinos and electrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗